
EDS-MIB DEFINITIONS ::= BEGIN
    IMPORTS
    enterprises
        FROM RFC1155-SMI
    OBJECT-TYPE
        FROM RFC-1212
    DisplayString
        FROM RFC1213-MIB;


    --Embedded Data Systems, Inc. enterprise OID
    edsMain OBJECT IDENTIFIER ::= { enterprises 31440 }

    --Enterprise company branch.
    edsEnterprise OBJECT IDENTIFIER ::= { edsMain 1 }

    eCompanyName OBJECT-TYPE
        SYNTAX              DisplayString
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Company owner of this enterprise number"
        ::= { edsEnterprise 1 }

    eProductName OBJECT-TYPE
        SYNTAX              DisplayString
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Name of this product"
        ::= { edsEnterprise 2 }

    eMIBVersion OBJECT-TYPE
        SYNTAX              DisplayString
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Version of the MIB file in the product"
        ::= { edsEnterprise 3 }

    eFirmwareVersion OBJECT-TYPE
        SYNTAX              DisplayString
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Firmware version"
        ::= { edsEnterprise 4 }

    eFirmwareDate OBJECT-TYPE
        SYNTAX              DisplayString
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Date of firmware"
        ::= { edsEnterprise 5 }

    --1-wire trap table
    owTrap OBJECT IDENTIFIER ::= { edsMain 2 }
    owTrapTable OBJECT-TYPE
        SYNTAX              SEQUENCE OF OwTrapEntry
        ACCESS              not-accessible
        STATUS              mandatory
        ::= { owTrap 1 }

    owTrapEntry OBJECT-TYPE
        SYNTAX              OwTrapEntry
        ACCESS              not-accessible
        STATUS              mandatory
        INDEX               {
                                owTrapIndex
                            }
        ::= { owTrapTable 1 }

    OwTrapEntry ::= SEQUENCE {
        owTrapIndex
            INTEGER,
        owTrapEnable
            INTEGER,
        owTrapIP
            IpAddress,
        owTrapCommunity
            INTEGER
    }

    owTrapIndex OBJECT-TYPE
        SYNTAX              INTEGER
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Index of table."
        ::= { owTrapEntry 1 }

    owTrapEnable OBJECT-TYPE
        SYNTAX              INTEGER (0..1)
        ACCESS              read-write
        STATUS              mandatory
        DESCRIPTION         "Zero disables the trap, one enables it."
        ::= { owTrapEntry 2 }

    owTrapIP OBJECT-TYPE
        SYNTAX              IpAddress
        ACCESS              read-write
        STATUS              mandatory
        DESCRIPTION         "Address to send trap to."
        ::= { owTrapEntry 3 }

    owTrapCommunity OBJECT-TYPE
        SYNTAX              DisplayString
        ACCESS              read-write
        STATUS              mandatory
        DESCRIPTION         "Community string to send with trap message."
        ::= { owTrapEntry 4 }


    --owTrapDeviceTable
    owTrapDeviceTable OBJECT-TYPE
        SYNTAX              SEQUENCE OF OwTrapDeviceEntry
        ACCESS              not-accessible
        STATUS              mandatory
        ::= { owTrap 2 }

    owTrapDeviceEntry OBJECT-TYPE
        SYNTAX              OwTrapDeviceEntry
        ACCESS              not-accessible
        STATUS              mandatory
        INDEX               {
                                owTrapDeviceIndex
                            }
        ::= { owTrapDeviceTable 1 }

    OwTrapDeviceEntry ::= SEQUENCE {
        owTrapDeviceIndex
            INTEGER,
        owTrapDeviceEnable
            INTEGER,
        owTrapDeviceSendPointer
            INTEGER,
		owTrapDeviceROM
		    OCTET STRING,
		owTrapDeviceVariable
			INTEGER,
		owTrapDeviceHighThreshold
		    DisplayString,
		owTrapDeviceLowThreshold
		    DisplayString,
		owTrapDeviceHysteresis
			DisplayString
    }

    owTrapDeviceIndex OBJECT-TYPE
        SYNTAX              INTEGER
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Index of table. Traps are sent with this OID followed by the index
        					number of the table entry that generated the trap. For example, if
        					the values at index 5 of this table generated a trap, the name of the
        					trap would be .iso.org.dod.internet.private.enterprises.edsMain.owTrap.
        					owTrapDeviceTable.owTrapDeviceEntry.owTrapDeviceIndex.5. The numeric
        					value is 1.3.6.1.4.1.31440.2.2.1.1.5. An integer value is sent with the
        					trap, which indicates what state change caused the trap. Using the
        					owTrapDeviceHighThreshold, owTrapDeviceLowThreshold and 
        					owTrapDeviceHysteresis values, 3 windows are created. Transitions between
        					these windows generates a trap. The integer value indicates which 
        					transition caused the trap as follows:
        					   1 -> middle to high window transition
        					   2 -> high to middle window transition
        					   3 -> middle to low window transition
        					   4 -> low to middle window transition
        					   
        					Note the following when programming traps:
        					   1) Programming the HighThreshold lower than the LowThreshold is
        					      invalid and will disable trap generation.
        					   2) owTrapDeviceHysteresis values are not checked for validity, use them
        					      with caution.
        					   3) A trap must be enabled to be sent.
        					   4) The owTrapDeviceROM must be set to an active 1-wire device or a trap 
        					      will not be sent.
        					   5) The health of the 1-wire device must be greater than 0 or no trap will
        					      be sent.
        					   6) The owTrapDeviceVariable must be valid. For exmaple, the DS18S20 has 3
        					      variables as follows: Temperature, UserByte1 and UserByte2. These are
        					      numbered 0, 1 and 2 respectively. A setting of 3 or above is invalid.
        					   7) The owTrapTable must be programmed correctly for traps to be sent.
        					      The respective table entry must be enabled and have a valid IP address.
        					      Community strings are not used by the SNMP server."
        					      
        					   
        ::= { owTrapDeviceEntry 1 }

    owTrapDeviceEnable OBJECT-TYPE
        SYNTAX              INTEGER (0..1)
        ACCESS              read-write
        STATUS              mandatory
        DESCRIPTION         "Zero disables the trap, one enables it."
        ::= { owTrapDeviceEntry 2 }

    owTrapDeviceSendPointer OBJECT-TYPE
        SYNTAX              INTEGER (0..1)
        ACCESS              read-write
        STATUS              mandatory
        DESCRIPTION         "Indicates which entry in the Trap Table to use to determine where
                            to send the trap. The Trap Table contains the destination IP address."
        ::= { owTrapDeviceEntry 3 }

    owTrapDeviceROM OBJECT-TYPE
        SYNTAX              DisplayString(SIZE(16))
        ACCESS              read-write
        STATUS              mandatory
        DESCRIPTION         "1-wire device ROM code to base sending trap message on."
        ::= { owTrapDeviceEntry 4 }

    owTrapDeviceVariable OBJECT-TYPE
        SYNTAX              INTEGER (0..99)
        ACCESS              read-write
        STATUS              mandatory
        DESCRIPTION         "Number of the variable to reference, as listed in the owDevices section
        					of this MIB. For example, the DS2406 has 9 items, which would be numbered 0 - 8.
        					So if owTrapDeviceVariable were set to 0 it would refer to owDS2406PIOAFlipFlop,
        					if it were set to 3 it would refer to owDS2406PIOBLevel."
        ::= { owTrapDeviceEntry 5 }

    owTrapDeviceHighThreshold OBJECT-TYPE
        SYNTAX              DisplayString
        ACCESS              read-write
        STATUS              mandatory
        DESCRIPTION         "A trap will be generated when the variable is greater than this value or
        					it is less than or equal to this value - owTrapDeviceHysteresis. This number 
        					may be positive or negative and may contain a decimal point. It must be between 
        					-32767.00 and 32767.00."
        ::= { owTrapDeviceEntry 6 }

    owTrapDeviceLowThreshold OBJECT-TYPE
        SYNTAX              DisplayString
        ACCESS              read-write
        STATUS              mandatory
        DESCRIPTION         "A trap will be generated when the variable is less than this value or
        					it is greater than or equal to this value + owTrapDeviceHysteresis. This number 
        					may be positive or negative and may contain a decimal point. It must be between 
        					-32767.00 and 32767.00."
        ::= { owTrapDeviceEntry 7 }

    owTrapDeviceHysteresis OBJECT-TYPE
        SYNTAX              DisplayString
        ACCESS              read-write
        STATUS              mandatory
        DESCRIPTION         "This value is used to limit repeated trap sends due to a value hovering around
        					a threshold. If it is not used it should be set to zero. This number may be positive 
        					or negative and may contain a decimal point. It must be between -32767.00
        					and 32767.00."
        ::= { owTrapDeviceEntry 8 }



    --1-wire devices branch.
    owDevices OBJECT IDENTIFIER ::= { edsMain 10 }

    --Device type table (conceptual).
    owDeviceTypes OBJECT IDENTIFIER ::= { owDevices 1 }

    owNone OBJECT IDENTIFIER ::= { owDeviceTypes 0 }

    owUnknown OBJECT IDENTIFIER ::= { owDeviceTypes 1 }

    owDS2406 OBJECT IDENTIFIER ::= { owDeviceTypes 2 }

    owDS18B20 OBJECT IDENTIFIER ::= { owDeviceTypes 3 }

    owDS18S20 OBJECT IDENTIFIER ::= { owDeviceTypes 4 }

    owDS2438 OBJECT IDENTIFIER ::= { owDeviceTypes 5 }

    owDS2423 OBJECT IDENTIFIER ::= { owDeviceTypes 6 }

    owDS2408 OBJECT IDENTIFIER ::= { owDeviceTypes 7 }

    owDS2450 OBJECT IDENTIFIER ::= { owDeviceTypes 8 }

    owEDS0064 OBJECT IDENTIFIER ::= { owDeviceTypes 9 }

    owEDS0065 OBJECT IDENTIFIER ::= { owDeviceTypes 10 }

    owEDS0066 OBJECT IDENTIFIER ::= { owDeviceTypes 11 }

    owEDS0067 OBJECT IDENTIFIER ::= { owDeviceTypes 12 }

    owEDS0068 OBJECT IDENTIFIER ::= { owDeviceTypes 13 }

    owEDS0069 OBJECT IDENTIFIER ::= { owDeviceTypes 14 }


    owDeviceInfo OBJECT IDENTIFIER ::= { owDevices 2 }

    owDeviceNumActive OBJECT-TYPE
        SYNTAX              INTEGER
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Number of currently active 1-wire devices. A device
                            is active if it's health is non-zero."
        ::= { owDeviceInfo 1 }

    owDeviceTable OBJECT-TYPE
        SYNTAX              SEQUENCE OF OwDeviceEntry
        ACCESS              not-accessible
        STATUS              mandatory
        ::= { owDevices 3 }

    owDeviceEntry OBJECT-TYPE
        SYNTAX              OwDeviceEntry
        ACCESS              not-accessible
        STATUS              mandatory
        INDEX               {
                                owDeviceIndex
                            }
        ::= { owDeviceTable 1 }

    OwDeviceEntry ::= SEQUENCE {
        owDeviceIndex
            INTEGER,
        owDeviceType
            INTEGER,
        owDeviceName
            DisplayString,
        owDeviceDescription
            DisplayString,
        owDeviceFamily
            INTEGER,
        owDeviceROM
            OCTET STRING,
        owDeviceHealth
            INTEGER
    }

    owDeviceIndex OBJECT-TYPE
        SYNTAX              INTEGER
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Index of table."
        ::= { owDeviceEntry 1 }

    owDeviceType OBJECT-TYPE
        SYNTAX              INTEGER
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "An indication of the device type. This is the
                            last OID number to the owDeviceTypes group pointing
                            to the name of the device. The corresponding
                            device table will contain the specific information
                            from the device. For example: if this entry is
                            2 (owDS2406) then the table owDS2406Table, at
                            the appropriate index, will contain the data
                            from the device."
        ::= { owDeviceEntry 2 }

    owDeviceName OBJECT-TYPE
        SYNTAX              DisplayString
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Text description of the device."
        ::= { owDeviceEntry 3 }

    owDeviceDescription OBJECT-TYPE
        SYNTAX              DisplayString
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Text description of the device."
        ::= { owDeviceEntry 4 }

    owDeviceFamily OBJECT-TYPE
        SYNTAX              OCTET STRING (SIZE(2))
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Family number as read from 1-wire device."
        ::= { owDeviceEntry 5 }

    owDeviceROM OBJECT-TYPE
        SYNTAX              OCTET STRING (SIZE(16))
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Entire ROM code as read from 1-wire device (includes
                            family number and CRC). Always 16 bytes long."
        ::= { owDeviceEntry 6 }

    owDeviceHealth OBJECT-TYPE
        SYNTAX              INTEGER (0..8)
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Health of device. Ranges between 0 and 8 where
                            0 worst case and 8 is best case. Incremented
                            every time device responds to a search, decremented
                            if it does not respond."
        ::= { owDeviceEntry 7 }

    owDS2406Table OBJECT-TYPE
        SYNTAX              SEQUENCE OF OwDS2406Entry
        ACCESS              not-accessible
        STATUS              mandatory
        DESCRIPTION         "Table for DS2406 (dual addressable switch plus
                            1K bit memory)."
        ::= { owDevices 4 }

    owDS2406Entry OBJECT-TYPE
        SYNTAX              OwDS2406Entry
        ACCESS              not-accessible
        STATUS              mandatory
        INDEX               {
                                owDeviceIndex
                            }
        ::= { owDS2406Table 1 }

    OwDS2406Entry ::= SEQUENCE {
        owDS2406PIOALevel
            INTEGER,
        owDS2406PIOBLevel
            INTEGER,
        owDS2406PIOAFlipFlop
            INTEGER,
        owDS2406PIOBFlipFlop
            INTEGER,
        owDS2406PIOAActivityLatch
            INTEGER,
        owDS2406PIOBActivityLatch
            INTEGER,
        owDS2406NumChnls
            INTEGER,
        owDS2406PwrSupply
            INTEGER,
        owDS2406ActivityLatchReset
            INTEGER
    }

    owDS2406PIOALevel OBJECT-TYPE
        SYNTAX              INTEGER {
                                low( 0 ),
                                high( 1 )
                            }
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "PIO-A logic level on pin. If PIO-A flip flop is
                            low, this input will always read low."
        ::= { owDS2406Entry 1 }

    owDS2406PIOBLevel OBJECT-TYPE
        SYNTAX              INTEGER {
                                low( 0 ),
                                high( 1 )
                            }
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "PIO-B logic level on pin. If PIO-B flip flop is
                            low, this input will always read low."
        ::= { owDS2406Entry 2 }

    owDS2406PIOAFlipFlop OBJECT-TYPE
        SYNTAX              INTEGER {
                                low( 0 ),
                                high( 1 )
                            }
        ACCESS              read-write
        STATUS              mandatory
        DESCRIPTION         "DS2406 PIO-A Flip Flop. Sets output state of the
                            FF. The output is open collector, so the FF must
                            be high (1) to be able to read a pin state of
                            low (0)."
        ::= { owDS2406Entry 3 }

    owDS2406PIOBFlipFlop OBJECT-TYPE
        SYNTAX              INTEGER {
                                low( 0 ),
                                high( 1 )
                            }
        ACCESS              read-write
        STATUS              mandatory
        DESCRIPTION         "DS2406 PIO-B Flip Flop. Sets output state of the
                            FF. The output is open collector, so the FF must
                            be high (1) to be able to read a pin state of
                            low (0)."
        ::= { owDS2406Entry 4 }

    owDS2406PIOAActivityLatch OBJECT-TYPE
        SYNTAX              INTEGER {
                                noActivity( 0 ),
                                yesActivity( 1 )
                            }
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "High (1) if the pin state had activity. Reset
                            by writing to activity latch reset."
        ::= { owDS2406Entry 5 }

    owDS2406PIOBActivityLatch OBJECT-TYPE
        SYNTAX              INTEGER {
                                noActivity( 0 ),
                                yesActivity( 1 )
                            }
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "High (1) if the pin state had activity. Reset
                            by writing to activity latch reset."
        ::= { owDS2406Entry 6 }

    owDS2406NumChnls OBJECT-TYPE
        SYNTAX              INTEGER {
                                pioAonly( 0 ),
                                pioAandB( 1 )
                            }
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Number of PIO channels the device supports. PIO-A
                            only is 0, PIO-A and PIO-B is 1."
        ::= { owDS2406Entry 7 }

    owDS2406PwrSupply OBJECT-TYPE
        SYNTAX              INTEGER {
                                pwrParasite( 0 ),
                                pwrExternal( 1 )
                            }
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Source of power for device. 0 is parasite powered,
                            1 is externally powered."
        ::= { owDS2406Entry 8 }

    owDS2406ActivityLatchReset OBJECT-TYPE
        SYNTAX              INTEGER {
                                noReset( 0 ),
                                yesReset( 1 )
                            }
        ACCESS              read-write
        STATUS              mandatory
        DESCRIPTION         "Activity latch reset is used to reset both PIO-A
                            and PIO-B activity latch. Send 1 to reset the
                            latch. Always reads 0."
        ::= { owDS2406Entry 9 }

    owDS18B20Table OBJECT-TYPE
        SYNTAX              SEQUENCE OF OwDS18B20Entry
        ACCESS              not-accessible
        STATUS              mandatory
        DESCRIPTION         "Table for DS18B20 (programmable resolution 1-wire
                            digital thermometer)."
        ::= { owDevices 5 }

    owDS18B20Entry OBJECT-TYPE
        SYNTAX              OwDS18B20Entry
        ACCESS              not-accessible
        STATUS              mandatory
        INDEX               {
                                owDeviceIndex
                            }
        ::= { owDS18B20Table 1 }

    OwDS18B20Entry ::= SEQUENCE {
        owDS18B20Temperature
            DisplayString,
        owDS18B20UserByte1
            INTEGER,
        owDS18B20UserByte2
            INTEGER,
        owDS18B20Resolution
            INTEGER,
        owDS18B20PwrSupply
            INTEGER
    }

    owDS18B20Temperature OBJECT-TYPE
        SYNTAX              DisplayString
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Current temperature from device, desplayed as
                            a string with decimal point. Required since MIB's
                            cannot contain floating point numbers."
        ::= { owDS18B20Entry 1 }

    owDS18B20UserByte1 OBJECT-TYPE
        SYNTAX              INTEGER
        ACCESS              read-write
        STATUS              mandatory
        DESCRIPTION         "User byte 1 as read from EEPROM."
        ::= { owDS18B20Entry 2 }

    owDS18B20UserByte2 OBJECT-TYPE
        SYNTAX              INTEGER
        ACCESS              read-write
        STATUS              mandatory
        DESCRIPTION         "User byte 2 as read from EEPROM."
        ::= { owDS18B20Entry 3 }

    owDS18B20Resolution OBJECT-TYPE
        SYNTAX              INTEGER {
                                nineBits( 9 ),
                                tenBits( 10 ),
                                elevenBits( 11 ),
                                twelveBits( 12 )
                            }
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Resolution of temperature reading, can be 9, 10,
                            11 or 12 bits. Default is 12 bits. 0 is 9 bits,
                            1 is 10 bits, 2 is 11 bits and 3 is 12 bits."
        ::= { owDS18B20Entry 4 }

    owDS18B20PwrSupply OBJECT-TYPE
        SYNTAX              INTEGER {
                                parasitePower( 0 ),
                                externalPower( 255 )
                            }
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Power source. Parasite or external. Zero is parasite."
        ::= { owDS18B20Entry 5 }

    owDS18S20Table OBJECT-TYPE
        SYNTAX              SEQUENCE OF OwDS18S20Entry
        ACCESS              not-accessible
        STATUS              mandatory
        DESCRIPTION         "Table for DS18S20 device data."
        ::= { owDevices 6 }

    owDS18S20Entry OBJECT-TYPE
        SYNTAX              OwDS18S20Entry
        ACCESS              not-accessible
        STATUS              mandatory
        DESCRIPTION         ""
        INDEX               {
                                owDeviceIndex
                            }
        ::= { owDS18S20Table 1 }

    OwDS18S20Entry ::= SEQUENCE {
        owDS18S20Temperature
            DisplayString,
        owDS18S20UserByte1
            INTEGER,
        owDS18S20UserByte2
            INTEGER
    }

    owDS18S20Temperature OBJECT-TYPE
        SYNTAX              DisplayString
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Latest temperature reading, in degrees centigrade."
        ::= { owDS18S20Entry 1 }

    owDS18S20UserByte1 OBJECT-TYPE
        SYNTAX              INTEGER (0..255)
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "User byte from device EEPROM."
        ::= { owDS18S20Entry 2 }

    owDS18S20UserByte2 OBJECT-TYPE
        SYNTAX              INTEGER (0..255)
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "User byte from device EEPROM."
        ::= { owDS18S20Entry 3 }


-- DS2423 TABLE

    owDS2423Table OBJECT-TYPE
        SYNTAX              SEQUENCE OF OwDS2423Entry
        ACCESS              not-accessible
        STATUS              mandatory
        DESCRIPTION         "Table for DS2423 device data."
        ::= { owDevices 7 }

    owDS2423Entry OBJECT-TYPE
        SYNTAX              OwDS2423Entry
        ACCESS              not-accessible
        STATUS              mandatory
        DESCRIPTION         ""
        INDEX               {
                                owDeviceIndex
                            }
        ::= { owDS2423Table 1 }

    OwDS2423Entry ::= SEQUENCE {
        owDS2423CounterA
            COUNTER32,
        owDS2423CounterB
            COUNTER32
    }

    owDS2423CounterA OBJECT-TYPE
        SYNTAX              COUNTER32
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Counter A value."
        ::= { owDS2423Entry 1 }

    owDS2423CounterB OBJECT-TYPE
        SYNTAX              COUNTER32
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Counter B value."
        ::= { owDS2423Entry 2 }


-- DS2438 TABLE

    owDS2438Table OBJECT-TYPE
        SYNTAX              SEQUENCE OF OwDS2438Entry
        ACCESS              not-accessible
        STATUS              mandatory
        DESCRIPTION         "Table for DS2438 device data."
        ::= { owDevices 8 }

    owDS2438Entry OBJECT-TYPE
        SYNTAX              OwDS2438Entry
        ACCESS              not-accessible
        STATUS              mandatory
        DESCRIPTION         ""
        INDEX               {
                                owDeviceIndex
                            }
        ::= { owDS2438Table 1 }

    OwDS2438Entry ::= SEQUENCE {
        owDS2438Temperature
            DisplayString,
        owDS2438SupplyVoltage
            DisplayString,
        owDS2438Current
            DisplayString,
        owDS2438PinVoltage
            DisplayString
    }

    owDS2438Temperature OBJECT-TYPE
        SYNTAX              DisplayString
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Temperature."
        ::= { owDS2438Entry 1 }

    owDS2438SupplyVoltage OBJECT-TYPE
        SYNTAX              DisplayString
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Voltage of the power supply."
        ::= { owDS2438Entry 2 }

    owDS2438PinVoltage OBJECT-TYPE
        SYNTAX              DisplayString
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Voltage at Pin Vad (pin 4)."
        ::= { owDS2438Entry 3 }

    owDS2438Current OBJECT-TYPE
        SYNTAX              DisplayString
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Voltage between the current pins."
        ::= { owDS2438Entry 4 }

-- DS2408 TABLE

    owDS2408Table OBJECT-TYPE
        SYNTAX              SEQUENCE OF OwDS2408Entry
        ACCESS              not-accessible
        STATUS              mandatory
        DESCRIPTION         "Table for DS2408 (8-channel addressable switch)."
        ::= { owDevices 9 }

    owDS2408Entry OBJECT-TYPE
        SYNTAX              owDS2408Entry
        ACCESS              not-accessible
        STATUS              mandatory
        INDEX               {
                                owDeviceIndex
                            }
        ::= { owDS2408Table 1 }

    owDS2408Entry ::= SEQUENCE {
        owDS2408PIOLogicState
            INTEGER,
        owDS2408PIOOutputLatchState
            INTEGER,
        owDS2408PIOActivityLatchState
            INTEGER,
        owDS2408RSTZConfiguration
            INTEGER,
        owDS2408PowerOnResetLatch
            INTEGER,
        owDS2408VCCPowerStatus
            INTEGER
    }

    owDS2408PIOLogicState OBJECT-TYPE
        SYNTAX              INTEGER
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Logic level on the 8 IO pins."
        ::= { owDS2408Entry 1 }

    owDS2408PIOOutputLatchState OBJECT-TYPE
        SYNTAX              INTEGER
        ACCESS              read-write
        STATUS              mandatory
        DESCRIPTION         "Output latch states. Sets output state of the
                            FFs. The output is open collector, so the FF must
                            be high (1) to be able to read a pin state of
                            low (0)."
        ::= { owDS2408Entry 2 }

    owDS2408PIOActivityLatchState OBJECT-TYPE
        SYNTAX              INTEGER {
                                low( 0 ),
                                high( 255 )
                            }
        ACCESS              read-write
        STATUS              mandatory
        DESCRIPTION         "High (1) if the pin state had activity. Reset
                            by writing to activity latch reset."
        ::= { owDS2408Entry 3 }

    owDS2408RSTZConfiguration OBJECT-TYPE
        SYNTAX              INTEGER {
                                low( 0 ),
                                high( 1 )
                            }
        ACCESS              read-write
        STATUS              mandatory
        DESCRIPTION         "Configures the RSTZ pin as a /RSTZ input (set to 0)
                            or a /STRB output (set to 1)."
        ::= { owDS2408Entry 4 }

    owDS2408PowerOnResetLatch OBJECT-TYPE
        SYNTAX              INTEGER {
                                low( 0 ),
                                high( 1 )
                            }
        ACCESS              read-write
        STATUS              mandatory
        DESCRIPTION         "Set high (1) with a power on reset. Reset
                            by writing to a 0."
        ::= { owDS2408Entry 5 }

    owDS2408VCCPowerStatus OBJECT-TYPE
        SYNTAX              INTEGER {
                                low( 0 ),
                                high( 1 )
                            }
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "High (1) if the VCC pin is connected to power,
                            low (0) otherwise."
        ::= { owDS2408Entry 6 }


-- DS2450 TABLE

    owDS2450Table OBJECT-TYPE
        SYNTAX              SEQUENCE OF OwDS2450Entry
        ACCESS              not-accessible
        STATUS              mandatory
        DESCRIPTION         "Table for DS2450 (8-channel addressable switch)."
        ::= { owDevices 10 }

    owDS2450Entry OBJECT-TYPE
        SYNTAX              owDS2450Entry
        ACCESS              not-accessible
        STATUS              mandatory
        INDEX               {
                                owDeviceIndex
                            }
        ::= { owDS2450Table 1 }

    owDS2450Entry ::= SEQUENCE {
        owDS2450ChannelAConversionValue
            DisplayString,
        owDS2450ChannelAConversionResolution
            INTEGER,
        owDS2450ChannelAConversionRange
            INTEGER,
        owDS2450ChannelAOutputEnable
            INTEGER,
        owDS2450ChannelAOutputControl
            INTEGER,
        owDS2450ChannelBConversionValue
            DisplayString,
        owDS2450ChannelBConversionResolution
            INTEGER,
        owDS2450ChannelBConversionRange
            INTEGER,
        owDS2450ChannelBOutputEnable
            INTEGER,
        owDS2450ChannelBOutputControl
            INTEGER,
        owDS2450ChannelCConversionValue
            DisplayString,
        owDS2450ChannelCConversionResolution
            INTEGER,
        owDS2450ChannelCConversionRange
            INTEGER,
        owDS2450ChannelCOutputEnable
            INTEGER,
        owDS2450ChannelCOutputControl
            INTEGER,
        owDS2450ChannelDConversionValue
            DisplayString,
        owDS2450ChannelDConversionResolution
            INTEGER,
        owDS2450ChannelDConversionRange
            INTEGER,
        owDS2450ChannelDOutputEnable
            INTEGER,
        owDS2450ChannelDOutputControl
            INTEGER,
        owDS2450PowerOnReset
            INTEGER,
        owDS2450VCCControl
            INTEGER
    }

    owDS2450ChannelAConversionValue OBJECT-TYPE
        SYNTAX              DisplayString
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Conversion value of the channel, in volts."
        ::= { owDS2450Entry 1 }

    owDS2450ChannelAConversionResolution OBJECT-TYPE
        SYNTAX              INTEGER
        ACCESS              read-write
        STATUS              mandatory
        DESCRIPTION         "Conversion resolution of the channel. Can be set
                            between 1 and 16."
        ::= { owDS2450Entry 2 }

    owDS2450ChannelAConversionRange OBJECT-TYPE
        SYNTAX              INTEGER {
                                low( 0 ),
                                high( 1 )
                            }
        ACCESS              read-write
        STATUS              mandatory
        DESCRIPTION         "If high (1), the maximum voltage that can be
        					measured is 5.10, low (0) sets the maximum voltage
        					to 2.55."
        ::= { owDS2450Entry 3 }

    owDS2450ChannelAOutputEnable OBJECT-TYPE
        SYNTAX              INTEGER {
                                low( 0 ),
                                high( 1 )
                            }
        ACCESS              read-write
        STATUS              mandatory
        DESCRIPTION         "A setting of 1 enables the output transistor, use
        					ChannelXOutputControl to turn the transistor on / off."
        ::= { owDS2450Entry 4 }

    owDS2450ChannelAOutputControl OBJECT-TYPE
        SYNTAX              INTEGER {
                                low( 0 ),
                                high( 1 )
                            }
        ACCESS              read-write
        STATUS              mandatory
        DESCRIPTION         "Set to low (0) to turn on the output transistor. Has
                            no effect if ChannelXOutputEnable is low (0)."
        ::= { owDS2450Entry 5 }

    owDS2450ChannelBConversionValue OBJECT-TYPE
        SYNTAX              DisplayString
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Conversion value of the channel, in volts."
        ::= { owDS2450Entry 6 }

    owDS2450ChannelBConversionResolution OBJECT-TYPE
        SYNTAX              INTEGER
        ACCESS              read-write
        STATUS              mandatory
        DESCRIPTION         "Conversion resolution of the channel. Can be set
                            between 1 and 16."
        ::= { owDS2450Entry 7 }

    owDS2450ChannelBConversionRange OBJECT-TYPE
        SYNTAX              INTEGER {
                                low( 0 ),
                                high( 1 )
                            }
        ACCESS              read-write
        STATUS              mandatory
        DESCRIPTION         "If high (1), the maximum voltage that can be
        					measured is 5.10, low (0) sets the maximum voltage
        					to 2.55."
        ::= { owDS2450Entry 8 }

    owDS2450ChannelBOutputEnable OBJECT-TYPE
        SYNTAX              INTEGER {
                                low( 0 ),
                                high( 1 )
                            }
        ACCESS              read-write
        STATUS              mandatory
        DESCRIPTION         "A setting of 1 enables the output transistor, use
        					ChannelXOutputControl to turn the transistor on / off."
        ::= { owDS2450Entry 9 }

    owDS2450ChannelBOutputControl OBJECT-TYPE
        SYNTAX              INTEGER {
                                low( 0 ),
                                high( 1 )
                            }
        ACCESS              read-write
        STATUS              mandatory
        DESCRIPTION         "Set to low (0) to turn on the output transistor. Has
                            no effect if ChannelXOutputEnable is low (0)."
        ::= { owDS2450Entry 10 }

    owDS2450ChannelCConversionValue OBJECT-TYPE
        SYNTAX              DisplayString
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Conversion value of the channel, in volts."
        ::= { owDS2450Entry 11 }

    owDS2450ChannelCConversionResolution OBJECT-TYPE
        SYNTAX              INTEGER
        ACCESS              read-write
        STATUS              mandatory
        DESCRIPTION         "Conversion resolution of the channel. Can be set
                            between 1 and 16."
        ::= { owDS2450Entry 12 }

    owDS2450ChannelCConversionRange OBJECT-TYPE
        SYNTAX              INTEGER {
                                low( 0 ),
                                high( 1 )
                            }
        ACCESS              read-write
        STATUS              mandatory
        DESCRIPTION         "If high (1), the maximum voltage that can be
        					measured is 5.10, low (0) sets the maximum voltage
        					to 2.55."
        ::= { owDS2450Entry 13 }

    owDS2450ChannelCOutputEnable OBJECT-TYPE
        SYNTAX              INTEGER {
                                low( 0 ),
                                high( 1 )
                            }
        ACCESS              read-write
        STATUS              mandatory
        DESCRIPTION         "A setting of 1 enables the output transistor, use
        					ChannelXOutputControl to turn the transistor on / off."
        ::= { owDS2450Entry 14 }

    owDS2450ChannelCOutputControl OBJECT-TYPE
        SYNTAX              INTEGER {
                                low( 0 ),
                                high( 1 )
                            }
        ACCESS              read-write
        STATUS              mandatory
        DESCRIPTION         "Set to low (0) to turn on the output transistor. Has
                            no effect if ChannelXOutputEnable is low (0)."
        ::= { owDS2450Entry 15 }

    owDS2450ChannelDConversionValue OBJECT-TYPE
        SYNTAX              DisplayString
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Conversion value of the channel, in volts."
        ::= { owDS2450Entry 16 }

    owDS2450ChannelDConversionResolution OBJECT-TYPE
        SYNTAX              INTEGER
        ACCESS              read-write
        STATUS              mandatory
        DESCRIPTION         "Conversion resolution of the channel. Can be set
                            between 1 and 16."
        ::= { owDS2450Entry 17 }

    owDS2450ChannelDConversionRange OBJECT-TYPE
        SYNTAX              INTEGER {
                                low( 0 ),
                                high( 1 )
                            }
        ACCESS              read-write
        STATUS              mandatory
        DESCRIPTION         "If high (1), the maximum voltage that can be
        					measured is 5.10, low (0) sets the maximum voltage
        					to 2.55."
        ::= { owDS2450Entry 18 }

    owDS2450ChannelDOutputEnable OBJECT-TYPE
        SYNTAX              INTEGER {
                                low( 0 ),
                                high( 1 )
                            }
        ACCESS              read-write
        STATUS              mandatory
        DESCRIPTION         "A setting of 1 enables the output transistor, use
        					ChannelXOutputControl to turn the transistor on / off."
        ::= { owDS2450Entry 19 }

    owDS2450ChannelDOutputControl OBJECT-TYPE
        SYNTAX              INTEGER {
                                low( 0 ),
                                high( 1 )
                            }
        ACCESS              read-write
        STATUS              mandatory
        DESCRIPTION         "Set to low (0) to turn on the output transistor. Has
                            no effect if ChannelXOutputEnable is low (0)."
        ::= { owDS2450Entry 20 }

    owDS2450PowerOnReset OBJECT-TYPE
        SYNTAX              INTEGER {
                                low( 0 ),
                                high( 1 )
                            }
        ACCESS              read-write
        STATUS              mandatory
        DESCRIPTION         "Set high (1) with a power on reset. Reset
                            by writing any value."
        ::= { owDS2450Entry 21 }

    owDS2450VCCControl OBJECT-TYPE
        SYNTAX              INTEGER {
                                low( 0 ),
                                high( 1 )
                            }
        ACCESS              read-write
        STATUS              mandatory
        DESCRIPTION         "Set high (1) if the VCC pin is connected to power,
                            set low (0) otherwise."
        ::= { owDS2450Entry 22 }

-- EDS0064 TABLE

    owEDS0064Table OBJECT-TYPE
        SYNTAX              SEQUENCE OF owEDS0064Entry
        ACCESS              not-accessible
        STATUS              mandatory
        DESCRIPTION         "Table for EDS0064 device data (temperature)"
        ::= { owDevices 11 }

    owEDS0064Entry OBJECT-TYPE
        SYNTAX              owEDS0064Entry
        ACCESS              not-accessible
        STATUS              mandatory
        DESCRIPTION         ""
        INDEX               {
                                owDeviceIndex
                            }
        ::= { owEDS0064Table 1 }

    owEDS0064Entry ::= SEQUENCE {
        owEDS0064Temperature
            DisplayString,
        owEDS0064Counter
            COUNTER32
    }

    owEDS0064Temperature OBJECT-TYPE
        SYNTAX              DisplayString
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Temperature."
        ::= { owEDS0064Entry 1 }

    owEDS0064Counter OBJECT-TYPE
        SYNTAX              COUNTER32
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Counter."
        ::= { owEDS0064Entry 2 }

-- EDS0065 TABLE

    owEDS0065Table OBJECT-TYPE
        SYNTAX              SEQUENCE OF owEDS0065Entry
        ACCESS              not-accessible
        STATUS              mandatory
        DESCRIPTION         "Table for EDS0065 device data (temperature and humiditiy)."
        ::= { owDevices 12 }

    owEDS0065Entry OBJECT-TYPE
        SYNTAX              owEDS0065Entry
        ACCESS              not-accessible
        STATUS              mandatory
        DESCRIPTION         ""
        INDEX               {
                                owDeviceIndex
                            }
        ::= { owEDS0065Table 1 }

    owEDS0065Entry ::= SEQUENCE {
        owEDS0065Temperature
            DisplayString,
        owEDS0065Humidity
            DisplayString,
        owEDS0065DewPoint
            DisplayString,
        owEDS0065Humidex
            DisplayString,
        owEDS0065HeatIndex
            DisplayString,
        owEDS0065Counter
            COUNTER32
    }

    owEDS0065Temperature OBJECT-TYPE
        SYNTAX              DisplayString
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Temperature."
        ::= { owEDS0065Entry 1 }

    owEDS0065Humidity OBJECT-TYPE
        SYNTAX              DisplayString
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Humidity."
        ::= { owEDS0065Entry 2 }

    owEDS0065DewPoint OBJECT-TYPE
        SYNTAX              DisplayString
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "DewPoint."
        ::= { owEDS0065Entry 3 }

    owEDS0065Humidex OBJECT-TYPE
        SYNTAX              DisplayString
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Humidex."
        ::= { owEDS0065Entry 4 }

    owEDS0065HeatIndex OBJECT-TYPE
        SYNTAX              DisplayString
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Heat Index."
        ::= { owEDS0065Entry 5 }

    owEDS0065Counter OBJECT-TYPE
        SYNTAX              COUNTER32
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Counter."
        ::= { owEDS0065Entry 6 }

-- EDS0066 TABLE

    owEDS0066Table OBJECT-TYPE
        SYNTAX              SEQUENCE OF owEDS0066Entry
        ACCESS              not-accessible
        STATUS              mandatory
        DESCRIPTION         "Table for EDS0001 device data (temperature and barometric pressure)."
        ::= { owDevices 13 }

    owEDS0066Entry OBJECT-TYPE
        SYNTAX              owEDS0066Entry
        ACCESS              not-accessible
        STATUS              mandatory
        DESCRIPTION         ""
        INDEX               {
                                owDeviceIndex
                            }
        ::= { owEDS0066Table 1 }

    owEDS0066Entry ::= SEQUENCE {
        owEDS0066Temperature
            DisplayString,
        owEDS0066BarometricPressureMb
        	DisplayString,
        owEDS0066BarometricPressureHg
        	DisplayString,
        owEDS0066Counter
            COUNTER32
    }

    owEDS0066Temperature OBJECT-TYPE
        SYNTAX              DisplayString
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Temperature."
        ::= { owEDS0066Entry 1 }

    owEDS0066BarometricPressureMb OBJECT-TYPE
        SYNTAX              DisplayString
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Barometric Pressure in Millibars."
        ::= { owEDS0066Entry 2 }

    owEDS0066BarometricPressureHg OBJECT-TYPE
        SYNTAX              DisplayString
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Barometric Pressure in Inches of Mercury."
        ::= { owEDS0066Entry 3 }

    owEDS0066Counter OBJECT-TYPE
        SYNTAX              COUNTER32
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Counter."
        ::= { owEDS0066Entry 4 }

-- EDS0067 TABLE

    owEDS0067Table OBJECT-TYPE
        SYNTAX              SEQUENCE OF owEDS0067Entry
        ACCESS              not-accessible
        STATUS              mandatory
        DESCRIPTION         "Table for EDS0067 device data (temperature and light)."
        ::= { owDevices 14 }

    owEDS0067Entry OBJECT-TYPE
        SYNTAX              owEDS0067Entry
        ACCESS              not-accessible
        STATUS              mandatory
        DESCRIPTION         ""
        INDEX               {
                                owDeviceIndex
                            }
        ::= { owEDS0067Table 1 }

    owEDS0067Entry ::= SEQUENCE {
        owEDS0067Temperature
            DisplayString,
        owEDS0067Light,
        	DisplayString,
        owEDS0067Counter
            COUNTER32
    }

    owEDS0067Temperature OBJECT-TYPE
        SYNTAX              DisplayString
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Temperature."
        ::= { owEDS0067Entry 1 }

    owEDS0067Light OBJECT-TYPE
        SYNTAX              DisplayString
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Light."
        ::= { owEDS0067Entry 2 }

    owEDS0067Counter OBJECT-TYPE
        SYNTAX              COUNTER32
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Counter."
        ::= { owEDS0067Entry 3 }

-- EDS0068 TABLE

    owEDS0068Table OBJECT-TYPE
        SYNTAX              SEQUENCE OF owEDS0068Entry
        ACCESS              not-accessible
        STATUS              mandatory
        DESCRIPTION         "Table for EDS0068 device data (temperature, humidity, barometric pressure and light)."
        ::= { owDevices 15 }

    owEDS0068Entry OBJECT-TYPE
        SYNTAX              owEDS0068Entry
        ACCESS              not-accessible
        STATUS              mandatory
        DESCRIPTION         ""
        INDEX               {
                                owDeviceIndex
                            }
        ::= { owEDS0068Table 1 }

    owEDS0068Entry ::= SEQUENCE {
        owEDS0068Temperature
            DisplayString,
        owEDS0068Humidity
            DisplayString,
        owEDS0068DewPoint
            DisplayString,
        owEDS0068Humidex
            DisplayString,
        owEDS0068HeatIndex
            DisplayString,
        owEDS0068BarometricPressureMb
        	DisplayString,
        owEDS0068BarometricPressureHg
        	DisplayString,
        owEDS0068Light,
        	DisplayString,
        owEDS0068Counter
            COUNTER32
    }

    owEDS0068Temperature OBJECT-TYPE
        SYNTAX              DisplayString
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Temperature."
        ::= { owEDS0068Entry 1 }

    owEDS0068Humidity OBJECT-TYPE
        SYNTAX              DisplayString
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Humidity."
        ::= { owEDS0068Entry 2 }

    owEDS0068DewPoint OBJECT-TYPE
        SYNTAX              DisplayString
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "DewPoint."
        ::= { owEDS0068Entry 3 }

    owEDS0068Humidex OBJECT-TYPE
        SYNTAX              DisplayString
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Humidex."
        ::= { owEDS0068Entry 4 }

    owEDS0068HeatIndex OBJECT-TYPE
        SYNTAX              DisplayString
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Heat Index."
        ::= { owEDS0068Entry 5 }

    owEDS0068BarometricPressureMb OBJECT-TYPE
        SYNTAX              DisplayString
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Barometric Pressure in Millibars."
        ::= { owEDS0068Entry 6 }

    owEDS0068BarometricPressureHg OBJECT-TYPE
        SYNTAX              DisplayString
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Barometric Pressure in Inches of Mercury."
        ::= { owEDS0068Entry 7 }

    owEDS0068Light OBJECT-TYPE
        SYNTAX              DisplayString
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Light."
        ::= { owEDS0068Entry 8 }

    owEDS0068Counter OBJECT-TYPE
        SYNTAX              COUNTER32
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Counter."
        ::= { owEDS0068Entry 9 }

-- EDS0069 TABLE

    owEDS0069Table OBJECT-TYPE
        SYNTAX              SEQUENCE OF owEDS0069Entry
        ACCESS              not-accessible
        STATUS              mandatory
        DESCRIPTION         "Table for EDS0069 device data (temperature and motion)."
        ::= { owDevices 16 }

    owEDS0069Entry OBJECT-TYPE
        SYNTAX              owEDS0069Entry
        ACCESS              not-accessible
        STATUS              mandatory
        DESCRIPTION         ""
        INDEX               {
                                owDeviceIndex
                            }
        ::= { owEDS0069Table 1 }

    owEDS0069Entry ::= SEQUENCE {
        owEDS0069Temperature
            DisplayString,
        owEDS0069Motion
            DisplayString,
        owEDS0069Counter
            COUNTER32
    }

    owEDS0069Temperature OBJECT-TYPE
        SYNTAX              DisplayString
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Temperature."
        ::= { owEDS0069Entry 1 }

    owEDS0069Motion OBJECT-TYPE
        SYNTAX              DisplayString
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Motion counter."
        ::= { owEDS0069Entry 2 }

    owEDS0069Counter OBJECT-TYPE
        SYNTAX              COUNTER32
        ACCESS              read-only
        STATUS              mandatory
        DESCRIPTION         "Counter."
        ::= { owEDS0069Entry 3 }

END

