#!/usr/bin/perl

#####################################
#####################################
### ______               _     =) ###
### | ___ \             | |       ###
### | |_/ / __ _  _ __  | |       ###
### |    / / _` || '_ \ | |       ###
### | |\ \| (_| || | | || |____   ###
### \_| \_|\__,_||_| |_|\_____/   ###
#####################################
#####################################
#####################################
## Original version written by
## ran.leibman@gmail.com
## Additionial checks code written
## by laurent.dufour@havas.com
##
## the following parameters has
## been tested against a 
## FAS2220
## FAS2240
## FAS3220
## FA2050, NetApp Release 7.3.1.1
## IBM System Storage N6240, Data ONTAP Release 8.1.4P4
##
## DISKSUMMARY|HA|CIFSSESSIONS|
## AUTOSUPPORTSTATUS|NFSOPS|
## CIFSOPS|SHELFINFO
##
#####################################
#####################################


use strict;
use POSIX;
use lib "/usr/lib/nagios/libexec";
use lib "/usr/lib/nagios/plugins";
use utils qw($TIMEOUT %ERRORS);
use Net::SNMP;
use File::Basename;
use Getopt::Long;

Getopt::Long::Configure('bundling');

my $stat = 0;
my $msg;
my $perf;
my $script_name = "check-netapp-ng.pl";
my $script_version = 1.1;

my $counterFilePath="/tmp";
my $counterFile;


my %ERRORS = (
        'OK'       => '0',
        'WARNING'  => '1',
        'CRITICAL' => '2',
        'UNKNOWN'  => '3',
    );

# default return value is UNKNOWN
my $state = "UNKNOWN";
my $answer = "";

# time this script was run
my $runtime = time();

my $key;
our %snmpIndexes;


# file related variables
my $fileRuntime;
my $fileHostUptime;
my $fileNfsOps;
my $fileCifsOps;

my $snmpHostUptime;


### SNMP OIDs
###############
my $snmpSysUpTime = '.1.3.6.1.2.1.1.3.0';
my $snmpFailedFanCount = '.1.3.6.1.4.1.789.1.2.4.2.0';
my $snmpFailPowerSupplyCount = '.1.3.6.1.4.1.789.1.2.4.4.0';
my $snmpcpuBusyTimePerCent = '.1.3.6.1.4.1.789.1.2.1.3.0';
my $snmpenvOverTemperature = '.1.3.6.1.4.1.789.1.2.4.1.0';
my $snmpnvramBatteryStatus = '.1.3.6.1.4.1.789.1.2.5.1.0';
my $snmpFailedDiskCount = '.1.3.6.1.4.1.789.1.6.4.7.0';
my $snmpUpTime = '.1.3.6.1.2.1.1.3.0';
my $snmpCacheAge = '.1.3.6.1.4.1.789.1.2.2.23.0';
my $snmpGlobalStatus = '.1.3.6.1.4.1.789.1.2.2.4.0';
my $snmpGlobalStatus_text = '.1.3.6.1.4.1.789.1.2.2.25.0';
my $snmpNdmpSessions = '.1.3.6.1.4.1.789.1.10.2.0';
my $snmpCifsSessions = '.1.3.6.1.4.1.789.1.7.2.12.0';
my $snmpAutoSupportStatus = '.1.3.6.1.4.1.789.1.2.7.1.0';
my $snmpAutoSupportStatus_text = '.1.3.6.1.4.1.789.1.2.7.2.0';



my $snmp_netapp_disksummary = '.1.3.6.1.4.1.789.1.6.4';
my $snmp_netapp_disksummary_diskTotalCount = '.1.3.6.1.4.1.789.1.6.4.1.0';
my $snmp_netapp_disksummary_diskActiveCount = '.1.3.6.1.4.1.789.1.6.4.2.0';
my $snmp_netapp_disksummary_diskFailedCount = '.1.3.6.1.4.1.789.1.6.4.7.0';
my $snmp_netapp_disksummary_diskSpareCount = '.1.3.6.1.4.1.789.1.6.4.8.0';
my $snmp_netapp_disksummary_diskReconstructingCount = '.1.3.6.1.4.1.789.1.6.4.3.0';
my $snmp_netapp_disksummary_diskFailedMessage = '.1.3.6.1.4.1.789.1.6.4.10.0';

my $snmp_netapp_cf = '.1.3.6.1.4.1.789.1.2.3';
my $snmp_netapp_cfSettings = '.1.3.6.1.4.1.789.1.2.3.1.0';
my $snmp_netapp_cfState = '.1.3.6.1.4.1.789.1.2.3.2.0';
my $snmp_netapp_cfCannotTakeoverCause = '.1.3.6.1.4.1.789.1.2.3.3.0';
my $snmp_netapp_cfPartnerStatus = '.1.3.6.1.4.1.789.1.2.3.4.0';
my $snmp_netapp_cfPartnerName = '.1.3.6.1.4.1.789.1.2.3.6.0';
my $snmp_netapp_cfInterconnectStatus = '.1.3.6.1.4.1.789.1.2.3.8.0';

my $snmpfilesysvolTable = '.1.3.6.1.4.1.789.1.5.8';
my $snmpfilesysvolTablevolEntryOptions = "$snmpfilesysvolTable.1.7";
my $snmpfilesysvolTablevolEntryvolName = "$snmpfilesysvolTable.1.2";




my $snmp_netapp_volume_id_table_df = ".1.3.6.1.4.1.789.1.5.4.1";
my $snmp_netapp_volume_id_table_df_name = "$snmp_netapp_volume_id_table_df.2";
my $snmp_netapp_volume_id_table_df_total = "$snmp_netapp_volume_id_table_df.3";
my $snmp_netapp_volume_id_table_df_used = "$snmp_netapp_volume_id_table_df.4";
my $snmp_netapp_volume_id_table_df_free = "$snmp_netapp_volume_id_table_df.5";
my $snmp_netapp_volume_id_table_df_used_prec = "$snmp_netapp_volume_id_table_df.6";


my $snmp_netapp_enclNumber = '.1.3.6.1.4.1.789.1.21.1.1';
my $snmpEnclTable = '.1.3.6.1.4.1.789.1.21.1.2.1';
my $snmpEnclTableIndex = "$snmpEnclTable.1";
my $snmpEnclTableState = "$snmpEnclTable.2";
my $snmpEnclTableShelfAddr = "$snmpEnclTable.3";
my $snmpEnclTableProductID = "$snmpEnclTable.5";
my $snmpEnclTableProductVendor = "$snmpEnclTable.6";
my $snmpEnclTableProductModel = "$snmpEnclTable.7";
my $snmpEnclTableProductRevision = "$snmpEnclTable.8";
my $snmpEnclTableProductSerial = "$snmpEnclTable.9";
my $snmpEnclTablePsFailed = "$snmpEnclTable.15";
my $snmpEnclTableFanFailed = "$snmpEnclTable.18";
my $snmpEnclTableTempOverFail = "$snmpEnclTable.21";
my $snmpEnclTableTempOverWarn = "$snmpEnclTable.22";
my $snmpEnclTableTempUnderFail = "$snmpEnclTable.23";
my $snmpEnclTableTempUnderWarn = "$snmpEnclTable.24";
my $snmpEnclTableCurrentTemp = "$snmpEnclTable.25";
my $snmpEnclTableElectronicFailed = "$snmpEnclTable.33";
my $snmpEnclTableVoltOverFail = "$snmpEnclTable.36";
my $snmpEnclTableVoltOverWarn = "$snmpEnclTable.37";
my $snmpEnclTableVoltUnderFail = "$snmpEnclTable.38";
my $snmpEnclTableVoltUnderWarn = "$snmpEnclTable.39";


my $snmp_netapp_miscHighNfsOps = '.1.3.6.1.4.1.789.1.2.2.5.0';
my $snmp_netapp_miscLowNfsOps = '.1.3.6.1.4.1.789.1.2.2.6.0';

my $snmp_netapp_miscHighCifsOps = '.1.3.6.1.4.1.789.1.2.2.7.0';
my $snmp_netapp_miscLowCifsOps = '.1.3.6.1.4.1.789.1.2.2.8.0';



# SNMP Status Codes
my %nvramBatteryStatus = (
	1 => 'ok',
	2 => 'partially discharged',
	3 => 'fully discharged',
	4 => 'not present',
	5 => 'near end of life',
	6 => 'at end of life',
	7 => 'unknown',
);
my %GlobalStatusIndex = (
	1 => 'other',
	2 => 'unknown',
	3 => 'ok',
	4 => 'nonCritical',
	5 => 'critical',
	6 => 'nonRecoverable',
);

my %AutoSupportStatusIndex = (
	1 => 'ok',
        2 => 'smtpFailure',
        3 => 'postFailure',
        4 => 'smtpPostFailure',
	5 => 'unknown',
);

my %cfSettingsIndex = (
	1 => 'notConfigured',
        2 => 'enabled',
        3 => 'disabled',
        4 => 'takeoverByPartnerDisabled',
        5 => 'thisNodeDead',
);


my %cfStateIndex = (
	1 => 'dead',
        2 => 'canTakeover',
        3 => 'cannotTakeover',
        4 => 'takeover',
);

my %cfCannotTakeoverCauseIndex = (
	1 => 'ok',
        2 => 'unknownReason',
        3 => 'disabledByOperator',
        4 => 'interconnectOffline',
        5 => 'disabledByPartner',
        6 => 'takeoverFailed',
        7 => 'mailboxDegraded',
        8 => 'partnerMailboxUninitialised',
        9 => 'mailboxVersionMismatch',
        10 => 'nvramSizeMismatch',
        11 => 'kernelVersionMismatch',
        12 => 'partnerBootingUp',
        13 => 'partnerPerformingRevert',
        14 => 'performingRevert',
        15 => 'partnerRequestedTakeover',
        16 => 'alreadyInTakenoverMode',
        17 => 'nvramLogUnsynchronized',
        18 => 'backupMailboxProblems',
);

my %cfPartnerStatusIndex = (
	1 => 'maybeDown',
        2 => 'ok',
        3 => 'dead',
);

my %cfInterconnectStatusIndex = (
	1 => 'notPresent',
        2 => 'down',
        3 => 'partialFailure',
        4 => 'up',
);

my %EcnlStatusIndex = (
	1 => 'initializing',
	2 => 'transitioning',
	3 => 'active',
	4 => 'inactive',
	5 => 'reconfiguring',
	6 => 'nonexistent',
);
### Functions
###############


sub _create_session(@) {
	my ($server, $comm) = @_;
	my $version = 1;
	my ($sess, $err) = Net::SNMP->session( -hostname => $server, -version => $version, -community => $comm);
	if (!defined($sess)) {
		print "Can't create SNMP session to $server\n";
		exit(1);
	}
	return $sess;
}

sub FSyntaxError($) {
	my $err = shift;
	print <<EOU;
  $err

     Syntax:
	 $script_name
	 Version : $script_version

	 -H = Ip/Dns Name of the Filer             -w = Warning Value
	 -C = SNMP Community                       -c = Critical Value
	 -T = Check type                           --vol = Volume Name
						   -e = vol exclude from snap check
	 TEMP                   - Temperature
	 FAN                    - Fan Fail
	 PS                     - Power Supply Fail
	 CPULOAD                - CPU Load (-w -c)
	 NVRAM                  - NVram Battery Status
	 DISKUSED               - Vol Usage Precentage (-w -c --vol)
	 SNAPSHOT               - Snapshot Config (-e volname,volname2,volname3)
	 SHELF                  - Shelf Health
	 SHELFINFO              - Shelf Model & Temperature Information
	 NFSOPS                 - Nfs Ops per seconds (-w -c)
	 CIFSOPS                - Cifs Ops per seconds (-w -c)
	 NDMPSESSIONS           - Number of ndmp sessions (-w -c)
	 CIFSSESSIONS           - Number of cifs sessions (-w -c)
	 GLOBALSTATUS           - Global Status of the filer
	 AUTOSUPPORTSTATUS      - Auto Support Status of the filer
	 HA                     - High Availability
	 DISKSUMMARY            - Status of disks
	 FAILEDDISK             - Number of failed disks
	 UPTIME                 - Only show\'s uptime
	 CACHEAGE               - Cache Age


EOU
	exit($ERRORS{'UNKNOWN'});
}

sub _get_oid_value(@) {
	my $sess = shift;
	my $local_oid = shift;
	my $r_return = $sess->get_request(-varbindlist => [$local_oid]);
	return($r_return->{$local_oid});
}

sub _clac_generic_err_stat(@) {
	my $value = shift;
	my $value_type = shift;
	my $tmp_warn = shift;
	my $tmp_crit = shift;
	my $scale = shift;
	my $r_msg;
	my $r_stat;
	if($value <= $tmp_warn) {
		$r_stat = $ERRORS{'OK'};
		$r_msg = "OK: $value_type $value $scale";
	}  elsif($value > $tmp_warn and $value < $tmp_crit) {
		$r_stat = $ERRORS{'WARNING'};
		$r_msg = "WARN: $value_type $value $scale";
	} elsif($value >= $tmp_crit) {
		$r_stat = $ERRORS{'CRITICAL'};
		$r_msg = "CRIT: $value_type $value $scale";
	}
	return($r_msg,$r_stat);
}


sub _clac_err_stat(@) {
	my $value = shift;
	my $value_type = shift;
	my $tmp_warn = shift;
	my $tmp_crit = shift;
	my $r_msg;
	my $r_stat;
	if($value <= $tmp_warn) {
		$r_stat = $ERRORS{'OK'};
		$r_msg = "OK: $value_type $value%";
	}  elsif($value > $tmp_warn and $value < $tmp_crit) {
		$r_stat = $ERRORS{'WARNING'};
		$r_msg = "WARN: $value_type $value%";
	} elsif($value >= $tmp_crit) {
		$r_stat = $ERRORS{'CRITICAL'};
		$r_msg = "CRIT: $value_type $value%";
	}
	return($r_msg,$r_stat);
}


sub _clac_absolute_err_stat(@) {
	my $value = shift;
	my $value_type = shift;
	my $tmp_warn = shift;
	my $tmp_crit = shift;
	my $r_msg;
	my $r_stat;
	($r_msg,$r_stat) = _clac_generic_err_stat($value,$value_type,$tmp_warn,$tmp_crit,"");
	return($r_msg,$r_stat);
}

sub _clac_minutes_err_stat(@) {
	my $value = shift;
	my $value_type = shift;
	my $tmp_warn = shift;
	my $tmp_crit = shift;
	my $r_msg;
	my $r_stat;
	($r_msg,$r_stat) = _clac_generic_err_stat($value,$value_type,$tmp_warn,$tmp_crit,"minutes");
	return($r_msg,$r_stat);
}



### Gather input from user
#############################
my %opt;
$opt{'crit'} = 500;
$opt{'warn'} = 500;
my $result = GetOptions(\%opt,
						'filer|H=s',
						'community|C=s',
						'check_type|T=s',
						'warn|w=i',
						'crit|c=i',
						'vol|v=s',
						'exclude|e=s',
						);

FSyntaxError("Missing -H")  unless defined $opt{'filer'};
FSyntaxError("Missing -C")  unless defined $opt{'community'};
FSyntaxError("Missing -T")  unless defined $opt{'check_type'};
if($opt{'vol'}) {
	if($opt{'vol'} !~ /^\/.*\/$/) {
		FSyntaxError("$opt{'vol'} format is /vol/volname/ !");
	}
}
if($opt{'crit'} and $opt{'warn'}) {
	if($opt{'warn'} > $opt{'crit'}) {
		FSyntaxError("Warning can't be larger then Critical: $opt{'warn'} > $opt{'crit'}");
	}
}


if (!defined($counterFilePath)) {
    $state = "UNKNOWN";
    $answer = "Filepath must be specified";
    print "$state: $answer\n";
    exit $ERRORS{$state};
} # end check for filepath




# Starting Alaram
alarm($TIMEOUT);

# Establish SNMP Session
our $snmp_session = _create_session($opt{'filer'},$opt{'community'});

# setup counterFile now that we have host IP and oid
$counterFile = $counterFilePath."/".$opt{'filer'}.".check-netapp-ng.ops.nagioscache";

$snmpHostUptime =  _get_oid_value($snmp_session,$snmpSysUpTime);


# READ CACHE DATA FROM FILE IF IT EXISTS
if (-e $counterFile) {
	open(FILE, "$counterFile");
	chomp($fileRuntime = <FILE>);
	chomp($fileHostUptime = <FILE>);
	chomp($fileNfsOps = <FILE>);
	chomp($fileCifsOps = <FILE>);
	close(FILE);
    } # end if file exists


# POPULATE CACHE DATA TO FILE 

if ((-w $counterFile) || (-w dirname($counterFile))) {
	open(FILE, ">$counterFile");
	print FILE "$runtime\n";
	print FILE "$snmpHostUptime\n";

	my $low_nfs_ops = _get_oid_value($snmp_session,$snmp_netapp_miscLowNfsOps);
	my $high_nfs_ops = _get_oid_value($snmp_session,$snmp_netapp_miscHighNfsOps);
	
	my $temp_high_ops = $high_nfs_ops << 32;
	my $total_nfs_ops = $temp_high_ops | $low_nfs_ops;

	print FILE "$total_nfs_ops\n";

	my $low_cifs_ops = _get_oid_value($snmp_session,$snmp_netapp_miscLowCifsOps);
	my $high_cifs_ops = _get_oid_value($snmp_session,$snmp_netapp_miscHighCifsOps);
	
	my $temp_high_ops = $high_cifs_ops << 32;
	my $total_cifs_ops = $temp_high_ops | $low_cifs_ops;

	print FILE "$total_cifs_ops\n";

	close(FILE);
    } else {
	$state = "WARNING";
	$answer = "file $counterFile is not writable\n";
	print ("$state: $answer\n");
        exit $ERRORS{$state};
    } # end if file is writable


# check to see if we pulled data from the cache file or not
if ( (!defined($fileRuntime)) && ( ("$opt{'check_type'}" eq "CIFSOPS") or ("$opt{'check_type'}" eq "NFSOPS") )) {
    $state = "OK";
    $answer = "never cached - caching\n";
    print "$state: $answer\n";
    exit $ERRORS{$state};
} # end if cache file didn't exist

# check host's uptime to see if it goes backward
if ($fileHostUptime > $snmpHostUptime) {
    $state = "WARNING";
    $answer = "uptime goes backward - recaching data\n";
    print "$state: $answer\n";
    exit $ERRORS{$state};
} # end if host uptime goes backward

my $elapsedtime=$runtime-$fileRuntime;

if ($elapsedtime<1){ $elapsedtime=1; }



#print "fileHostUptime : ".$fileHostUptime."\n";
#print "snmpeHostUptime : ".$snmpHostUptime."\n";
#print "elapsedTime : ".$elapsedtime."\n";







### Temperature ###
if("$opt{'check_type'}" eq "TEMP") {
	my $check = _get_oid_value($snmp_session,$snmpenvOverTemperature);
	if($check == 1) {
		$stat = $ERRORS{'OK'};
		$msg = "OK: $opt{'check_type'} is ok";
	} else {
		$stat = $ERRORS{'CRITICAL'};
		$msg = "CRIT: Over $opt{'check_type'} !";
	}
	$perf = "overtemperature=$check";
### Fan ###
} elsif("$opt{'check_type'}" eq "FAN") {
	my $check = _get_oid_value($snmp_session,$snmpFailedFanCount);
	if($check == 0) {
		$stat = $ERRORS{'OK'};
		$msg = "OK: $opt{'check_type'} $check";
	} else {
		$stat = $ERRORS{'CRITICAL'};
		$msg = "CRIT: $opt{'check_type'} $check !";
	}
	$perf = "failedfans=$check";
### PS ###
} elsif("$opt{'check_type'}" eq "PS") {
	my $check = _get_oid_value($snmp_session,$snmpFailPowerSupplyCount);
	if($check == 0) {
		$stat = $ERRORS{'OK'};
		$msg = "OK: $opt{'check_type'} Fail $check";
	} else {
		$stat = $ERRORS{'CRITICAL'};
		$msg = "CRIT: $opt{'check_type'} Fail $check !";
	}
	$perf = "failedpowersupplies=$check";
### CPULOAD ###
} elsif("$opt{'check_type'}" eq "CPULOAD") {
	my $check = _get_oid_value($snmp_session,$snmpcpuBusyTimePerCent);
	($msg,$stat) = _clac_err_stat($check,$opt{'check_type'},$opt{'warn'},$opt{'crit'});
	$perf = "cpuload=$check\%";
### NFSOPS ###
} elsif("$opt{'check_type'}" eq "NFSOPS") {
	my $low_nfs_ops = _get_oid_value($snmp_session,$snmp_netapp_miscLowNfsOps);
	my $high_nfs_ops = _get_oid_value($snmp_session,$snmp_netapp_miscHighNfsOps);
	
	my $temp_high_ops = $high_nfs_ops << 32;
	my $total_nfs_ops = $temp_high_ops | $low_nfs_ops;

	my $nfsops_per_seconds=floor ( ($total_nfs_ops-$fileNfsOps)/$elapsedtime );

	my $check=$nfsops_per_seconds;

	($msg,$stat) = _clac_absolute_err_stat($check,$opt{'check_type'},$opt{'warn'},$opt{'crit'});
	$perf = "nfsops=$check";
### CIFSOPS ###
} elsif("$opt{'check_type'}" eq "CIFSOPS") {
	my $low_cifs_ops = _get_oid_value($snmp_session,$snmp_netapp_miscLowCifsOps);
	my $high_cifs_ops = _get_oid_value($snmp_session,$snmp_netapp_miscHighCifsOps);
	
	my $temp_high_ops = $high_cifs_ops << 32;
	my $total_cifs_ops = $temp_high_ops | $low_cifs_ops;

	my $cifsops_per_seconds=floor ( ($total_cifs_ops-$fileCifsOps)/$elapsedtime );

	my $check=$cifsops_per_seconds;

	($msg,$stat) = _clac_absolute_err_stat($check,$opt{'check_type'},$opt{'warn'},$opt{'crit'});
	$perf = "cifsops=$check";
### NVRAM ###
} elsif("$opt{'check_type'}" eq "NVRAM") {
	my $check = _get_oid_value($snmp_session,$snmpnvramBatteryStatus);
	if($check == 1) {
		$stat = $ERRORS{'OK'};
		$msg = "OK: $opt{'check_type'} $nvramBatteryStatus{$check}";
	} else {
		$stat = $ERRORS{'CRITICAL'};
		$msg = "CRIT: $opt{'check_type'} $nvramBatteryStatus{$check}";
	}
	$perf = "nvrambatterystatus=$check";
### DISKUSED ###
} elsif("$opt{'check_type'}" eq "DISKUSED") {

	FSyntaxError("Missing -vol")  unless defined $opt{'vol'};

	my $r_vol_tbl = $snmp_session->get_table($snmp_netapp_volume_id_table_df_name);
	foreach my $key ( keys %$r_vol_tbl) {
		if("$$r_vol_tbl{$key}" eq "$opt{'vol'}") {
			my @tmp_arr = split(/\./, $key);
			my $oid = pop(@tmp_arr);

			my $used = _get_oid_value($snmp_session,"$snmp_netapp_volume_id_table_df_used.$oid");
			my $used_prec = _get_oid_value($snmp_session,"$snmp_netapp_volume_id_table_df_used_prec.$oid");

			($msg,$stat) = _clac_err_stat($used_prec,$opt{'check_type'},$opt{'warn'},$opt{'crit'});

			$perf = "$$r_vol_tbl{$key}=$used\k";
		}
	}
        if ($msg =~ /^$/) {
                $stat = $ERRORS{'WARNING'};
                $msg = "WARN: Missing volume $opt{'vol'} !";
        }                
### SNAPSHOT ###
} elsif("$opt{'check_type'}" eq "SNAPSHOT") {
	my @exc_list = split(',',$opt{'exclude'});
	my @vol_err;
	my $r_vol_tbl = $snmp_session->get_table($snmpfilesysvolTablevolEntryvolName);
	foreach my $key ( keys %$r_vol_tbl) {
		my @tmp_arr = split(/\./, $key);
		my $oid = pop(@tmp_arr);
		my $vol_tmp = "$$r_vol_tbl{$key}";

		my $volopt = _get_oid_value($snmp_session,"$snmpfilesysvolTablevolEntryOptions.$oid");

		if($volopt !~ /nosnap=off/) {
			my $volcheck = 0;
			foreach my $exvol (@exc_list) {
				if($exvol eq $vol_tmp) {
					$volcheck++;
					last;
				}
			}
			if($volcheck == 0) {
				push(@vol_err,"$vol_tmp");
			}
		}
	}

	my $err_count = $#vol_err + 1;
	if($err_count == 0) {
		$stat = $ERRORS{'OK'};
		$msg = "OK: $opt{'check_type'} all ok";
	} else {
		$stat = $ERRORS{'CRITICAL'};
		$msg = "CRIT: $opt{'check_type'} @vol_err not configured";
	}
	$perf = "snapoff=$err_count";
### FAILEDDISK ###
} elsif("$opt{'check_type'}" eq "FAILEDDISK") {
	my $check = _get_oid_value($snmp_session,$snmpFailedDiskCount);
	if($check == 0) {
		$stat = $ERRORS{'OK'};
		$msg = "OK: $opt{'check_type'} $check";
	} else {
		$stat = $ERRORS{'CRITICAL'};
		$msg = "CRIT: $opt{'check_type'} $check";
	}
	$perf = "faileddisks=$check";

### DISKSUMMARY ###
} elsif("$opt{'check_type'}" eq "DISKSUMMARY") {
	my $diskTotal = _get_oid_value($snmp_session,$snmp_netapp_disksummary_diskTotalCount);
	my $diskActive = _get_oid_value($snmp_session,$snmp_netapp_disksummary_diskActiveCount);
	my $diskFailed = _get_oid_value($snmp_session,$snmp_netapp_disksummary_diskFailedCount);
	my $diskReconstructing = _get_oid_value($snmp_session,$snmp_netapp_disksummary_diskReconstructingCount);
	my $diskSpare = _get_oid_value($snmp_session,$snmp_netapp_disksummary_diskSpareCount);
	my $diskMessage = _get_oid_value($snmp_session,$snmp_netapp_disksummary_diskFailedMessage);

	my $check=$diskFailed;

	if($check == 0) {
		$stat = $ERRORS{'OK'};
		$msg = "OK: $opt{'check_type'} (".$diskMessage.") Disk Summary : Total->".$diskTotal." Active->".$diskActive." Spare->".$diskSpare." Failed ->".$diskFailed. " Reconstructing ->".$diskReconstructing;
	} elsif ($diskSpare>0) {
		$stat = $ERRORS{'WARNING'};
		$msg = "WARN: $opt{'check_type'} (".$diskMessage.") Disk Summary : Total->".$diskTotal." Active->".$diskActive." Spare->".$diskSpare." Failed ->".$diskFailed. " Reconstructing ->".$diskReconstructing;
	} else {
		$stat = $ERRORS{'CRITICAL'};
		$msg = "CRIT: $opt{'check_type'} (".$diskMessage.") Disk Summary : Total->".$diskTotal." Active->".$diskActive." Spare->".$diskSpare." Failed ->".$diskFailed. " Reconstructing ->".$diskReconstructing;
	}
	$perf = "faileddisks=$check total=$diskTotal active=$diskActive spare=$diskSpare reconstructing=$diskReconstructing";

### HA ###
} elsif("$opt{'check_type'}" eq "HA") {

	my $cfSettings = _get_oid_value($snmp_session,$snmp_netapp_cfSettings);
	my $cfState = _get_oid_value($snmp_session,$snmp_netapp_cfState);
	my $cfCannotTakeoverCause = _get_oid_value($snmp_session,$snmp_netapp_cfCannotTakeoverCause);
	my $cfPartnerStatus = _get_oid_value($snmp_session,$snmp_netapp_cfPartnerStatus);
	my $cfPartnerName = _get_oid_value($snmp_session,$snmp_netapp_cfPartnerName);
	my $cfInterconnectStatus = _get_oid_value($snmp_session,$snmp_netapp_cfInterconnectStatus);

	my $check=$cfSettings;

	if($cfSettings == 2) {


	    if ( ($cfPartnerStatus != 2) or ($cfState != 2) or ($cfInterconnectStatus != 4) ) {
		    $stat = $ERRORS{'CRITICAL'};
		$msg = "CRIT: $opt{'check_type'} HA Summary : Settings->".$cfSettingsIndex{$cfSettings}." State->".$cfStateIndex{$cfState}." Cannot Takeover Cause->".$cfCannotTakeoverCauseIndex{$cfCannotTakeoverCause}." Partner->".$cfPartnerName." Partner Status ->".$cfPartnerStatusIndex{$cfPartnerStatus}." Interconnection State->".$cfInterconnectStatusIndex{$cfInterconnectStatus};		
	    } else {
		$stat = $ERRORS{'OK'};
		$msg = "OK: $opt{'check_type'} HA Summary : Settings->".$cfSettingsIndex{$cfSettings}." State->".$cfStateIndex{$cfState}." Partner->".$cfPartnerName." Partner Status ->".$cfPartnerStatusIndex{$cfPartnerStatus}." Interconnection State->".$cfInterconnectStatusIndex{$cfInterconnectStatus};
	    }

	} elsif ( ($cfSettings == 3) or ($cfSettings == 1) ) {
		$stat = $ERRORS{'OK'};
		$msg = "OK: $opt{'check_type'} HA Summary : Settings ->".$cfSettingsIndex{$cfSettings};
	} else {
		$stat = $ERRORS{'CRITICAL'};
		$msg = "CRIT: $opt{'check_type'} HA Summary : Settings->".$cfSettingsIndex{$cfSettings}." State->".$cfStateIndex{$cfState}." Partner->".$cfPartnerName." Partner Status ->".$cfPartnerStatusIndex{$cfPartnerStatus}." Interconnection State->".$cfInterconnectStatusIndex{$cfInterconnectStatus};
	}
	$perf = "hasettings=$check";


### UPTIME ###
} elsif("$opt{'check_type'}" eq "UPTIME") {
	my $check = _get_oid_value($snmp_session,$snmpUpTime);
	$msg = "$opt{'check_type'}: $check";
	$check =~ m/^\s*(\d+)\s+days,\s+(\d+):(\d+):(\d+).*$/;
	$perf = "uptime=" . ($1*86400 + $2*3600 + $3*60 + $4) . "s";
### CACHEAGE ###
} elsif("$opt{'check_type'}" eq "CACHEAGE") {
	my $check = _get_oid_value($snmp_session,$snmpCacheAge);
	($msg,$stat) = _clac_minutes_err_stat($check,$opt{'check_type'},$opt{'warn'},$opt{'crit'});
	$perf = "cache_age=$check";
### GLOBALSTATUS ###
} elsif("$opt{'check_type'}" eq "GLOBALSTATUS") {
	my $check = _get_oid_value($snmp_session,$snmpGlobalStatus);
	my $global_stat_txt = _get_oid_value($snmp_session,$snmpGlobalStatus_text);
	if($check == 3) {
		$stat = $ERRORS{'OK'};
		$msg = "OK: $opt{'check_type'} $GlobalStatusIndex{$check} $check $global_stat_txt";
	} else {
		$stat = $ERRORS{'CRITICAL'};
		$msg = "CRIT: $opt{'check_type'} $GlobalStatusIndex{$check} $check $global_stat_txt";
	}
	$perf = "globalstatus=$check";
### AUTOSUPPORTSTATUS ###
} elsif("$opt{'check_type'}" eq "AUTOSUPPORTSTATUS") {
	my $check = _get_oid_value($snmp_session,$snmpAutoSupportStatus);
	my $autosupport_stat_txt = _get_oid_value($snmp_session,$snmpAutoSupportStatus_text);
	if($check == 1) {
		$stat = $ERRORS{'OK'};
		$msg = "OK: $opt{'check_type'} $AutoSupportStatusIndex{$check} $check $autosupport_stat_txt";
	} else {
		$stat = $ERRORS{'CRITICAL'};
		$msg = "CRIT: $opt{'check_type'} $AutoSupportStatusIndex{$check} $check $autosupport_stat_txt";
	}
	$perf = "autosupportstatus=$check";
### NDMPSESSIONS ###
} elsif("$opt{'check_type'}" eq "NDMPSESSIONS") {
	my $check = _get_oid_value($snmp_session,$snmpNdmpSessions);
	($msg,$stat) = _clac_absolute_err_stat($check,$opt{'check_type'},$opt{'warn'},$opt{'crit'});
	$perf = "ndmpsess=$check";
### CIFSSESSIONS ###
} elsif("$opt{'check_type'}" eq "CIFSSESSIONS") {
	my $check = _get_oid_value($snmp_session,$snmpCifsSessions);
	($msg,$stat) = _clac_absolute_err_stat($check,$opt{'check_type'},$opt{'warn'},$opt{'crit'});
	$perf = "cifssess=$check";
### SHELF ###
} elsif ( ("$opt{'check_type'}" eq "SHELF") or ("$opt{'check_type'}" eq "SHELFINFO") ) {
	my @errs;
	my $r_shelf = $snmp_session->get_table($snmpEnclTableIndex);
	my $perf_temp = "";
	foreach my $key ( sort keys %$r_shelf) {
		my @tmp_arr = split(/\./, $key);
		my $oid = pop(@tmp_arr);

		my %shelf;
		my @shelf_err;
		my $addr = _get_oid_value($snmp_session,"$snmpEnclTableShelfAddr.$oid");

		my $shelf_state = _get_oid_value($snmp_session,"$snmpEnclTableState.$oid");

		if($shelf_state != 3) {
			push(@shelf_err,"$addr state $EcnlStatusIndex{$shelf_state},");
		}

		if ("$opt{'check_type'}" eq "SHELFINFO") {

		my $shelf_temp =  _get_oid_value($snmp_session,"$snmpEnclTableCurrentTemp.$oid");    

 
                my @current_temp = split(/\,/, $shelf_temp );

		$shelf{'ShelfNumber'} = $oid;
                $shelf{'CurrentTemp'} = shift(@current_temp);
		$shelf{'ProductID'} = _get_oid_value($snmp_session,"$snmpEnclTableProductID.$oid");
		$shelf{'ProductVendor'} = _get_oid_value($snmp_session,"$snmpEnclTableProductVendor.$oid");
		$shelf{'ProductModel'} = _get_oid_value($snmp_session,"$snmpEnclTableProductModel.$oid");
		$shelf{'ProductRevision'} = _get_oid_value($snmp_session,"$snmpEnclTableProductRevision.$oid");
		$shelf{'ProductSerial'} = _get_oid_value($snmp_session,"$snmpEnclTableProductSerial.$oid");
		} else {
		$shelf{'PsFail'} = _get_oid_value($snmp_session,"$snmpEnclTablePsFailed.$oid");
		$shelf{'FanFail'} = _get_oid_value($snmp_session,"$snmpEnclTableFanFailed.$oid");
		$shelf{'ElectFail'} = _get_oid_value($snmp_session,"$snmpEnclTableElectronicFailed.$oid");
		$shelf{'TempOverFail'} = _get_oid_value($snmp_session,"$snmpEnclTableTempOverFail.$oid");
		$shelf{'TempOver'} = _get_oid_value($snmp_session,"$snmpEnclTableTempOverWarn.$oid");
		$shelf{'TempUnderFail'} = _get_oid_value($snmp_session,"$snmpEnclTableTempUnderFail.$oid");
		$shelf{'TempUnderWarn'} = _get_oid_value($snmp_session,"$snmpEnclTableTempUnderWarn.$oid");
		$shelf{'VoltOverFail'} = _get_oid_value($snmp_session,"$snmpEnclTableVoltOverFail.$oid");
		$shelf{'VoltOverWarn'} = _get_oid_value($snmp_session,"$snmpEnclTableVoltOverWarn.$oid");
		$shelf{'VoltUnderFail'} = _get_oid_value($snmp_session,"$snmpEnclTableVoltUnderFail.$oid");
		$shelf{'VoltUnderWarn'} = _get_oid_value($snmp_session,"$snmpEnclTableVoltUnderWarn.$oid");
		}


		foreach my $subkey ( keys %shelf) {
		    if ( $shelf{$subkey} ne "" ) {
		    	print "$subkey->$shelf{$subkey} ";
                        if ( "$subkey" eq "CurrentTemp" ) {
                                $shelf{$subkey} =~ m/^([0-9]+)C.*$/;
                                $perf_temp = "$perf_temp, temp_$shelf{'ShelfNumber'}=$1";
                        }
		    }
		    else
		     { print "$subkey->"; print "None "; }
			
			if ("$opt{'check_type'}" eq "SHELF") {
			if($shelf{$subkey}) { push(@shelf_err,"$addr $subkey,") }
			}
		}

		{ print "\n"; }
		##if ("$opt{'check_type'}" eq "SHELFINFO") { print "\n"; }

		if($#shelf_err != -1) {
			push(@errs,@shelf_err)
		}
	}

	if($#errs == -1) {
		$stat = $ERRORS{'OK'};
		$msg = "OK: $opt{'check_type'} ok";
		if ("$opt{'check_type'}" eq "SHELFINFO") 
		{ $perf = "shelfinfo=0$perf_temp"; }
		else
		{ $perf = "shelf=0"; }
	} else {
		$stat = $ERRORS{'CRITICAL'};
		$msg = "CRIT: $opt{'check_type'} Errors -";
		foreach(@errs) {
			$msg = "$msg $_";
		}
		if ("$opt{'check_type'}" eq "SHELFINFO") 
		{ $perf = "shelfinfo=1$perf_temp"; }
		else
		{ $perf = "shelf=1"; }
	}
### Syntax Error ###
} else {
	FSyntaxError("$opt{'check_type'} invalid parameter !");
}


print "$msg | $perf\n";
exit($stat);