I already ran that command, in my initial investigation.
Now I even removed the host, services and the mrtg related config file.
I'm now on Nagios XI 2024R1.1 and ran the switch/router wizard, afterwards I ran your command again and there are no warnings/errors with the host IP in it.
Search found 244 matches
- Thu Mar 28, 2024 2:53 am
- Forum: Nagios XI
- Topic: Aruba switch monitoring - bandwidth in rrd says NaN
- Replies: 6
- Views: 322
- Wed Mar 27, 2024 4:56 am
- Forum: Nagios XI
- Topic: Aruba switch monitoring - bandwidth in rrd says NaN
- Replies: 6
- Views: 322
- Fri Feb 23, 2024 5:45 am
- Forum: Nagios XI
- Topic: Aruba switch monitoring - bandwidth in rrd says NaN
- Replies: 6
- Views: 322
Re: Aruba switch monitoring - bandwidth in rrd says NaN
Hi, I already tested that, if you read my initial post you can see that I already went a few steps ahead than this basic test (result attached on the bottom of this message). If I run the rrddump tool against the rrd files I get NaN in the results, so something is wrong with the mrtg query. I also p...
- Wed Feb 21, 2024 4:41 am
- Forum: Nagios XI
- Topic: Aruba switch monitoring - bandwidth in rrd says NaN
- Replies: 6
- Views: 322
Aruba switch monitoring - bandwidth in rrd says NaN
Hi, recently we added a Aruba switch to our monitoring using the switch wizard, but the bandwidth graphs are flat (0). I checked the mrtg config, which seems to be ok comparing to other vendor switches. One thing I noticed is that the rrd file has NaN in the values when I dump the file and the wizar...
- Fri Sep 15, 2023 12:26 am
- Forum: Nagios XI
- Topic: Upgrade from 5.11.1 to 5.11.2 fails
- Replies: 4
- Views: 1509
Re: Upgrade from 5.11.1 to 5.11.2 fails
No, I think I would go with an upgrade, so no nagios recovery would be needed.
If there is nothing from Nagios I need to think about, then I will proceed with the upgrade in some time.
Anyhow, thanks for the workaround, if its all from your side, then we can close this one
If there is nothing from Nagios I need to think about, then I will proceed with the upgrade in some time.
Anyhow, thanks for the workaround, if its all from your side, then we can close this one
- Thu Sep 14, 2023 2:46 am
- Forum: Nagios XI
- Topic: Upgrade from 5.11.1 to 5.11.2 fails
- Replies: 4
- Views: 1509
Re: Upgrade from 5.11.1 to 5.11.2 fails
To be honest, I'm also not sure why that is. Our nagios server was CentOS, but then we migrated to Ubuntu, and I'm quite convinced we started with 20 LTS version. The symlink did do the trick and I upgraded without issues, but this still doesn't explain why things look as they do. Do you have any id...
- Tue Sep 12, 2023 7:27 am
- Forum: Nagios XI
- Topic: Upgrade from 5.11.1 to 5.11.2 fails
- Replies: 4
- Views: 1509
Upgrade from 5.11.1 to 5.11.2 fails
The upgrade fails due to the logrotate.service not being found here: /usr/lib/systemd/system/logrotate.service mine is in: /lib/systemd/system/logrotate.service The logrotate service is failing: Sep 12 12:25:35 STGNAGIOS01.thule.com logrotate[175316]: error: nagiosxi:1 unknown option 'PRODDIR' -- ig...
- Wed May 24, 2023 1:55 am
- Forum: Nagios XI
- Topic: Mails don't get send - SMTP connect() failed.
- Replies: 4
- Views: 6540
Re: Mails don't get send - SMTP connect() failed.
This worked perfectly, thank you!
- Tue May 23, 2023 7:29 am
- Forum: Nagios XI
- Topic: Mails don't get send - SMTP connect() failed.
- Replies: 4
- Views: 6540
Mails don't get send - SMTP connect() failed.
Hi, after upgrading to 5.10.0 sending mails stopped working. I tried troubleshooting but without success. Our setup is very simple, smtp relay, no encryption, no authentication, things worked until the upgrade. The test email debug says that: Mailer said: [05-23-2023 12:27:40] SMTP connect() failed....
- Thu Mar 11, 2021 4:00 am
- Forum: Nagios XI
- Topic: DeployAgent - Raspbian/ARM bug
- Replies: 1
- Views: 370
DeployAgent - Raspbian/ARM bug
Hi, today I tried to deploy NCPA on an RaspberryPi, looks like the deployment script doesn't take the distro into account. It simply didn't download the package, after I manually put an package to /tmp/ncpa.deb and re-run the deployment it worked. Few things to notice: in the wizard there was no dis...