Nagios Support Forum

Hello and Happy New Year. I had the opportunity to do a hard test on the Liebert UPS alerts, and of course, they failed......again. I put the UPS into bypass mode and didn't receive any alarms and the GUI didn't show any abnormalities either. Everything showed green and normal. snmptt.log shows: Wed...

Bingo! You found the problem, and for that I thank you! Once I saw your last post, and the log entries you sent, I went back and searched for host names and IP's that related to those UPS's. I removed all references and then set up the host snmp traps again and all seems to be testing OK.I am much f...

Hello; I decided after reading your post to start at the Liebert Web Cards and work my way back toward the NMS. I have researched this in depth on my end and have found the following; 1. All of my APC UPS's are working fine and I am receiving their traps on the Nagios XI Service Status page. 2. I ha...

I did as you asked, turning off the active checks, nice find on that because that would have been an issue down the road for sure. HOWEVER, still getting same result on test. I have attached the snmptt.log. snmptt.log.jpg I'm not understanding how we are expecting to see any result in the Service St...

Of course I have the host and services configured
Again, there is nothing in the unconfigured objects (I triple checked to be sure)
Here is the /usr/local/nagios/var/nagios.log file you asked for as well:
Please let me know what else I can provide if need be.

Did as you asked and yes I restarted the service. I then ran a Liebert trap from one of my Libert ups's Same entry in snmptt.log /var/log/snmptt/snmptt.log Wed Dec 27 12:56:23 2017 .1.3.6.1.4.1.476.1.42.2.3.0.0.7 Normal "Status Events" 10.15.98.234 - The agent card is alive. 5:20:39:10.72 ...

Hi tgriep; A snapshot of my /etc/snmp/snmptt.ini file is attached. I'm surprised that I don't have any Liebert files in here. I only have the APC. I'm concerned about removing ANYTHING to do with APC as all of my APC alerts are working fine and I don't want to break anything while trying to get the ...

Hello again, So it looks like now that the Liebert mib's are installed properly, I am back to my original issue which caused me to remove the mibs in the first place (which was obviously not necessary) :shock: I am not receiving the Liebert trap alerts on the Nagios side. When I test a trap alert, i...

Hello; Your directions worked perfectly. The mibs loaded without any errors. I believe this was all due to residual files being left behind after the removal of the mibs. I will now be testing to see that the traps work. I appreciate all of the help! Thank you so much and have a great Holiday :D Rich

Good Morning; I have ran the commands as requested and posted the two files here: sharesnmp.tgz \ snmp.tgz Please keep in mind that after trying unsuccessfully several times, I stopped trying to load the files after the first one error-ed out on the last attempt, so the only mib loaded at this time ...