Nagios Support Forum

Hi all, I verified both your suggestions: By running manually the script (/usr/lib64/nagios/plugins/eventhandlers/submit_check_result 192.168.0.1 TRAP 1 "MaintMode test") the Nagios behaviour is ok, just one log is reported The SNMPTT conf file of this device contains only 2 different OID:...

Hi sreinhardt and jsmurphy, thank you for the response. I verified my logs and I confirm the informations reported in my first post. Regarding one single alarm: snmtrapd log reports just one message snmptt log reports just one message nagios log reports two identical messages, at the same time. The ...

Dear all, I have an issue by managing the traps sent by a device to SNMPTT and forwarded to Nagios (by evenhandles submit_check_result). As showed in the following snmptt.log, when one trap arrives to the server, just one log is registered. Fri Apr 5 17:07:54 2013 .1.3.6.1.4.1.2540.1.1.1.23.0.45.2 N...

Dear abrist,

many thanks for your reply.
I solved my issue by using the "user-supplied coords", then monitoring just the host provided by XY coords.

Bye

Hi all,

at the moment the status map of Nagios shows all the active hosts.
I want to hide some hosts. It is possible?

Thanks,
Regards.

I'd like to write a rule to retrieve some values from a string like this: 50%w 15u%c - #network_1(44/46 95%) #network_2(12/13 92%) #network_n(31/41 75%) The rule should create 3 different rrd files: /output: ........ push @s, [network_k, [data, GAUGE, $1] ]; where $1 is 95 for network_1 92 for netwo...

I found the solution

/output:SNMP.*?(\d+(\.\d{1,2})?)/
and push @s, [ SNMP, [ 'data', GAUGE, $1 ]];

Regards

Hi, I want to configure the map file of nagiosgraph to recognize the following SNMP response (String type) []# snmpget -cpublic -v2c xxx.xxx.xxx.xxx .1.3.6.1.4.1.4466.1.2.10.1.1.1.2.1.9.1392508928 SNMPv2-SMI::enterprises.4466.1.2.10.1.1.1.2.1.9.1392508928 = STRING: "8.82" Can anyone help m...

Solved... I used two different check_snmp versions.

Regards

Hi all, I've a problem using check_snmp. This is the SNMP get result: # snmpget -v2c -cpublic xx.xx.xx.xx .1.3.6.1.4.1.6247.32.1.5.5.0 SNMPv2-SMI::enterprises.6247.32.1.5.5.0 = INTEGER: 1 that means an alarm in the device (0 = OK, 1 = alarm) This is the check_snmp shell result # ./check_snmp -C publ...