NRPE ERROR On NagiosXI GUI (version mismatch)
Posted: Thu Sep 17, 2020 7:17 pm
Hi Guys,
We are migrating servers from Nagios core to NagiosXI. And on windows2008 server, for one of the check service below is the output in NagiosXI CLI:
But, I'm getting an error in NagiosXI GUI as shown below:
O/P with Private IP
O/P with Public IP
And as checked-in logs, we got the below errors:
On NagiosXI Machine, i have installed nrpe with passing
[NRPE]
allow_arguments=1
payload length=8192
Could you guys Please suggest your inputs on this
We are migrating servers from Nagios core to NagiosXI. And on windows2008 server, for one of the check service below is the output in NagiosXI CLI:
Code: Select all
[root@nagiosxiawsdev libexec]# ./check_nrpe -H <IP> -2 -c CheckFile2 -a max-dir-depth=0 path=\\\\PalsINTSQL001\\iERP85_Production pattern=IntuitiveERP_PalsINTSQL001_iERP85_Production.dbk filter+size=gt:10k MinWarn=0 MinCrit=0
IntuitiveERP_PALSINTSQL001_iERP85_Production.dbk|'found files'=1;0;0;
Code: Select all
[root@nagiosxiawsdev libexec]# ./check_nrpe -2 -H <IP>
I (0.3.8.76 2010-05-27) seem to be doing fine...
O/P with Private IP
Code: Select all
[nagios@nagiosxiawsdev ~]$ /usr/local/nagios/libexec/check_nrpe -H <Private IP> -2 -t 30 -c CheckFile2 -a max-dir-depth=0 path=\\\\PalsINTSQL001\\iERP85_Production pattern=IntuitiveERP_PalsINTSQL001_iERP85_Production.dbk filter+size=gt:10k MinWarn=0 MinCrit=0
Check contains error. Check log for details (or enable show_errors in nsc.ini)
Code: Select all
[nagios@nagiosxiawsdev ~]$ /usr/local/nagios/libexec/check_nrpe -H <Public IP> -2 -t 30 -c CheckFile2 -a max-dir-depth=0 path=\\\\PalsINTSQL001\\iERP85_Production pattern=IntuitiveERP_PalsINTSQL001_iERP85_Production.dbk filter+size=gt:10k MinWarn=0 MinCrit=0
CHECK_NRPE: Receive header underflow - only 0 bytes received (4 expected).
Code: Select all
localhost check_nrpe: Remote <Private IP> does not support version 3/4 packets
localhost check_nrpe: Remote <pub IP> does not support version 3/4 packets
and in nrpe.cfg modified./configure --enable-command-args
And on remote machine in file NSC.INI, I have made the below changes :dont_blame_nrpe=1
[NRPE]
allow_arguments=1
payload length=8192
Could you guys Please suggest your inputs on this