z

Commercial Support Clients: Clients with support contracts can get escalated support assistance by visiting Nagios Answer Hub. These forums are for community support services. Although we at Nagios try our best to help out on the forums here, we always give priority support to our support clients.

Monitor localhost URL

This support forum board is for support questions relating to Nagios XI, our flagship commercial network monitoring solution.

Monitor localhost URL

Postby apteancloud » Mon May 03, 2021 5:01 am

Hi,

Is there a way to monitor localhost URLs. I want to monitor http://localhost:51011/api/status. How do I set it up?
Its a Windows host machine and we are using nsclient++

Regards
apteancloud
 
Posts: 47
Joined: Wed Sep 09, 2020 4:05 am

Re: Monitor localhost URL

Postby ssax » Mon May 03, 2021 1:11 pm

You should be able to add a plugin to the windows nsclient host, define the command in the nsclient.ini, and then call the plugin and pass in the URL and it should do it.

What specifically are you trying to monitor at that web address, just that it's up? Or some specific content? What specifically?

I found this that may work for you:

https://www.claudiokuenzler.com/blog/685/simple-http-check-monitoring-plugin-windows-check_http-alternative
ssax
Dreams In Code
 
Posts: 7682
Joined: Wed Feb 11, 2015 12:54 pm

Re: Monitor localhost URL

Postby apteancloud » Mon May 03, 2021 9:06 pm

Basically, the host machine where that URL is set in such a way, it can only be accessed at localhost, not as a public endpoint. In which case, I would have used check_http.
So, from the host machine, if I hit http://myhost.local:51011/api/status or http://localhost:51011/api/status, it gives me output as:
Code: Select all
{"status":"Started","startTime":"2021-03-26T08:34:50.873063Z","appserverURL":"AppServer://myhost.local:5162/TEST_WC","scalingInterval":1000,"cleanupInterval":10000,"stateServerPortRangeStart":58100,"stateServerMaxInstances":40,"stateServerMinInstances":30,"stateServerPrestartedInstances":30,"stateServerPrestartRampUp":1,"stateServerEnablePrestart":false,"stateServerTenant":"Test-Host","stateServerStartupTimeout":1800000}

What I am trying to achieve with this check is a regex search for keyword "Started". If found, all OK.
apteancloud
 
Posts: 47
Joined: Wed Sep 09, 2020 4:05 am

Re: Monitor localhost URL

Postby vtrac » Tue May 04, 2021 4:38 pm

Hi,
Hope you are having a good day!!

What happens if you run "check_http" from your XI command prompt:
(NOTE: x.x.x.x is your remote windows IP address)
Code: Select all
/usr/local/nagios/libexec/check_http -H x.x.x.x -p 51011 -u '/api/status' -U -v


If the above does not work, then I would suggest that you write a powershell script and call its from your XI machine.


Best Regards,
Vinh
User avatar
vtrac
 
Posts: 903
Joined: Tue Oct 27, 2020 1:35 pm

Re: Monitor localhost URL

Postby apteancloud » Wed May 05, 2021 6:34 am

When I run the command you mentioned, this is what I get:
Code: Select all
[nagios@NagiosXIAzDev ~]$ /usr/local/nagios/libexec/check_http -H 10.179.3.25 -p 51011 -u '/api/status' -U -v
connect to address 10.179.3.25 and port 51011: Connection refused
HTTP CRITICAL - Unable to open TCP socket


The output from the remote server is:
Code: Select all
{"status":"Started","startTime":"2021-04-30T08:28:54.4085873Z","appserverURL":"AppServer://APPSRVURL","scalingInterval":500,"cleanupInterval":10000,"stateServerEnablePrestart":false,"stateServerTenant":"Live","stateServerStartupTimeout":1800000}


And from there I want to do a regex for "Started" and "scalingInterval". If found, Nagios will say OK, else CRITICAL.

On the Powershell side, I can write something like this and it gives me the JSON output:
Code: Select all
PS C:\Program Files\NSClient++\scripts> (Invoke-WebRequest http://APPSRVURL:51010/api/status).Content
{"status":"Started","startTime":"2021-04-30T08:28:54.4085873Z","appserverURL":"AppServer://APPSRVURL","scalingInterval":500,"cleanupInterval":10000,"stateServerEnablePrestart":false,"stateServerTenant":"Live","stateServerStartupTimeout":1800000}


But how do I make Nagios talk and capture that PowerShell output and give me an OK/CRITICAL state?
apteancloud
 
Posts: 47
Joined: Wed Sep 09, 2020 4:05 am

Re: Monitor localhost URL

Postby vtrac » Wed May 05, 2021 3:27 pm

Hi,
First, let see if you can "ping" the remote host from your XI machine.
Please open a command prompt from your XI machine (please update outputs or screenshots):
Code: Select all
ping 10.179.3.25


If you are able to "ping 10.179.3.25", then run the below command and see if port "51011" open from your XI to your remote machine:
(please post outputs or screenshots)
Code: Select all
nmap -Pn -p 51011 10.179.3.25


Also, please upload the "profile.zip":
Admin > System Config > System Profile > "Download profile"

Best Regards,
Vinh
User avatar
vtrac
 
Posts: 903
Joined: Tue Oct 27, 2020 1:35 pm

Re: Monitor localhost URL

Postby apteancloud » Wed May 12, 2021 9:20 am

Outputs:
Code: Select all
CHS_Admin@NagiosXIAzPrd:~$ ping 10.179.3.25
PING 10.179.3.25 (10.179.3.25) 56(84) bytes of data.
64 bytes from 10.179.3.25: icmp_seq=1 ttl=128 time=0.916 ms
64 bytes from 10.179.3.25: icmp_seq=2 ttl=128 time=0.958 ms
64 bytes from 10.179.3.25: icmp_seq=3 ttl=128 time=0.902 ms
64 bytes from 10.179.3.25: icmp_seq=4 ttl=128 time=1.29 ms
64 bytes from 10.179.3.25: icmp_seq=5 ttl=128 time=0.894 ms
64 bytes from 10.179.3.25: icmp_seq=6 ttl=128 time=1.14 ms
64 bytes from 10.179.3.25: icmp_seq=7 ttl=128 time=13.4 ms
64 bytes from 10.179.3.25: icmp_seq=8 ttl=128 time=0.905 ms
64 bytes from 10.179.3.25: icmp_seq=9 ttl=128 time=0.952 ms
64 bytes from 10.179.3.25: icmp_seq=10 ttl=128 time=0.843 ms
^C64 bytes from 10.179.3.25: icmp_seq=11 ttl=128 time=0.952 ms
64 bytes from 10.179.3.25: icmp_seq=12 ttl=128 time=0.934 ms
^C
--- 10.179.3.25 ping statistics ---
12 packets transmitted, 12 received, 0% packet loss, time 11095ms
rtt min/avg/max/mdev = 0.843/2.013/13.464/3.454 ms


Code: Select all
CHS_Admin@NagiosXIAzPrd:~$ nmap -Pn -p 51011 10.179.3.25

Starting Nmap 7.60 ( https://nmap.org ) at 2021-05-12 14:07 UTC
Nmap scan report for 10.179.3.25
Host is up (0.00091s latency).

PORT      STATE  SERVICE
51011/tcp closed unknown

Nmap done: 1 IP address (1 host up) scanned in 0.15 seconds


I can hit the site on the remote server though.
Capture1.JPG
You do not have the required permissions to view the files attached to this post.
apteancloud
 
Posts: 47
Joined: Wed Sep 09, 2020 4:05 am

Re: Monitor localhost URL

Postby vtrac » Wed May 12, 2021 2:43 pm

Hi,
See if you can talk to your network admin to open port "51011".

Can you try this on your XI command prompt? .... (NOTE: x.x.x.x is the remote windows IP address)
Code: Select all
curl -k -L -vvv "http://x.x.x.x:51011/api/status"


Using "check_http" is the easiest if you can get port "51011" open.


Regards,
Vinh
User avatar
vtrac
 
Posts: 903
Joined: Tue Oct 27, 2020 1:35 pm

Re: Monitor localhost URL

Postby apteancloud » Thu May 13, 2021 9:58 am

Hi,

Opening Port was denied :cry:

Any other suggestions?
apteancloud
 
Posts: 47
Joined: Wed Sep 09, 2020 4:05 am

Re: Monitor localhost URL

Postby vtrac » Thu May 13, 2021 10:42 am

Hi,
Can you run the below command on your XI command prompt?
Code: Select all
curl -k -L -vvv "http://x.x.x.x:51011/api/status"


Regards,
Vinh
User avatar
vtrac
 
Posts: 903
Joined: Tue Oct 27, 2020 1:35 pm

Next

Return to Nagios XI

Who is online

Users browsing this forum: No registered users and 5 guests