Install NRPE failed

This support forum board is for support questions relating to Nagios XI, our flagship commercial network monitoring solution.
Post Reply
swddels
Posts: 7
Joined: Thu Sep 08, 2016 1:10 am

Install NRPE failed

Post by swddels »

Hi, i follow the installation guide
https://assets.nagios.com/downloads/nag ... _Agent.pdf

but failed, please help, thanks!

===================
INSTALLATION ERROR!
===================

Installation step failed - exiting.
Check for error messages in the install log (install.log).

If you require assistance in resolving the issue, please include install.log
in your communications with Nagios XI technical support.

The script that failed was: './A-subcomponents'
You do not have the required permissions to view the files attached to this post.
User avatar
ajcoil
Posts: 49
Joined: Wed Aug 09, 2023 10:30 am

Re: Install NRPE failed

Post by ajcoil »

Hi @swddels,

Thank you for reaching out!

I'm sorry to hear you are having installation issues with installing NRPE.

I would recommend installing the latest version from https://assets.nagios.com/downloads/nag ... ent.tar.gz.

If you are still having issues, feel free to reach out!
kg2857
Posts: 233
Joined: Wed Apr 12, 2023 5:48 pm

Re: Install NRPE failed

Post by kg2857 »

I think newer nrpe installs set nrpe as a service rather than running under xinetd. That said, has the OP thought to read the error messages, check if xinettd is isn installed and maybe setting it up?
Post Reply