NagiosLS Stand Alone install Failure

This support forum board is for support questions relating to Nagios Log Server, our solution for managing and monitoring critical log data.
Locked
sethwhitcomb
Posts: 1
Joined: Thu Mar 28, 2019 1:56 pm

NagiosLS Stand Alone install Failure

Post by sethwhitcomb »

Anyone get around this issue trying to install nagios LS? my system is isolated and gets packages from a local rh satellite server.


28 Mar 16:00:49 ntpdate[7299]: no server suitable for synchronization found
Collecting argparse
Retrying (Retry(total=4, connect=None, read=None, redirect=None)) after connection broken by 'NewConnectionError('<pip._vendor.requests.packages.urllib3.connection.VerifiedHTTPSConnection object at 0x7f5c4286c650>: Failed to establish a new connection: [Errno 101] Network is unreachable',)': /simple/argparse/
Retrying (Retry(total=3, connect=None, read=None, redirect=None)) after connection broken by 'NewConnectionError('<pip._vendor.requests.packages.urllib3.connection.VerifiedHTTPSConnection object at 0x7f5c4286c850>: Failed to establish a new connection: [Errno 101] Network is unreachable',)': /simple/argparse/
Retrying (Retry(total=2, connect=None, read=None, redirect=None)) after connection broken by 'NewConnectionError('<pip._vendor.requests.packages.urllib3.connection.VerifiedHTTPSConnection object at 0x7f5c4286c750>: Failed to establish a new connection: [Errno 101] Network is unreachable',)': /simple/argparse/
Retrying (Retry(total=1, connect=None, read=None, redirect=None)) after connection broken by 'NewConnectionError('<pip._vendor.requests.packages.urllib3.connection.VerifiedHTTPSConnection object at 0x7f5c4286c290>: Failed to establish a new connection: [Errno 101] Network is unreachable',)': /simple/argparse/
Retrying (Retry(total=0, connect=None, read=None, redirect=None)) after connection broken by 'NewConnectionError('<pip._vendor.requests.packages.urllib3.connection.VerifiedHTTPSConnection object at 0x7f5c4286c550>: Failed to establish a new connection: [Errno 101] Network is unreachable',)': /simple/argparse/
Could not find a version that satisfies the requirement argparse (from versions: )
No matching distribution found for argparse

===================
INSTALLATION ERROR!
===================
Installation step failed - exiting.
Check for error messages in the install log (install.log).

If you require assistance in resolving the issue, please include install.log
in your communications with Nagios Enterprises technical support.

The step that failed was: 'prereqs'
scottwilkerson
DevOps Engineer
Posts: 19396
Joined: Tue Nov 15, 2011 3:11 pm
Location: Nagios Enterprises
Contact:

Re: NagiosLS Stand Alone install Failure

Post by scottwilkerson »

One thing worth mentioning is that in a non-connected environment there are special setup instructions
https://support.nagios.com/kb/article/n ... n-495.html

Nagios Enterprises provides this KB article to customers in good faith. However an installation of Nagios Log Server using this method is not officially supported by Nagios Enterprises, future problems caused by using this method is beyond our control. Support may be limited if problems cannot be reproduced on a normal installation of Nagios Log Server.
Former Nagios employee
Creator:
ahumandesign.com
enneagrams.com
Locked