configuration l'agent NRPE

This support forum board is for support questions relating to Nagios XI, our flagship commercial network monitoring solution.
Locked
1433021903
Posts: 1
Joined: Wed May 29, 2019 3:51 am

configuration l'agent NRPE

Post by 1433021903 »

I entered this command / usr / local / nagios / libexec / check_nrpe -H localhost
and I got the result (NRPE v3.2.1) but the line that follows my request to add the IP address of the nagios server but when I enter / usr / local / nagios / libexec / check_nrpe -H 192.168.1.10 j result in an error as follows (check_nrpe: error could not connect to 192.168.1.10: connection reset by peer)
benjaminsmith
Posts: 5324
Joined: Wed Aug 22, 2018 4:39 pm
Location: saint paul

Re: configuration l'agent NRPE

Post by benjaminsmith »

Hello,

Is 192.168.1.10 the remote host running NRPE?

Have you added the IP address of the Nagios XI server to the NRPE configruation file under only_from = 127.0.0.1 <Nagios XI server ip>? Please follow the troubleshooting guide below to help resolve this.

NRPE - CHECK_NRPE: Error - Could Not Complete SSL Handshake

Let me know if you're able to get it working.
As of May 25th, 2018, all communications with Nagios Enterprises and its employees are covered under our new Privacy Policy.

Be sure to check out our Knowledgebase for helpful articles and solutions!
Locked