CHECK_NRPE: Error - Could not complete SSL handshake

Engage with the community of users including those using the open source solutions.
Includes Nagios Core, Plugins, and NCPA

CHECK_NRPE: Error - Could not complete SSL handshake

Postby ashwin.samba » Thu Oct 15, 2020 5:16 am

Initially I was working with on the check_disk issue where the error was “CHECK_NRPE: Error - Could not connect to 10.137.134.117: Connection reset by peer.”. for which Nagios support Knowledge base re-directed to the URL: https://support.nagios.com/kb/article/n ... e-615.html. Was executing the steps are described. In that after executing below commands received the error as “CHECK_NRPE: Error receiving data from daemon”. CHECK_NRPE: Error - Could not complete SSL handshake. Could you please help me to resolve the isse
ashwin.samba
 
Posts: 4
Joined: Wed Jul 22, 2020 2:17 am

Re: CHECK_NRPE: Error - Could not complete SSL handshake

Postby benjaminsmith » Fri Oct 16, 2020 4:18 pm

Hi,

Thanks for using Nagios and participating in the Community Forum. The most common cause here is if the allowed hosts option is not set correctly. Open a shell on the remote hosts and check the following file.
Code: Select all
vi /usr/local/nagios/etc/nrpe.cfg

And make sure you have the Nagios Server IP address set.
Code: Select all
vi /usr/local/nagios/etc/nrpe.cfg

If you make any changes be sure to restart NRPE to apply them.

If that's not your issue, then check the command arguments and lastly make sure you compiled NRPE with SSL enabled. This is all described in the kb article. Let us know if you get working!

https://support.nagios.com/kb/article/n ... e-615.html

Benjamin
As of May 25th, 2018, all communications with Nagios Enterprises and its employees are covered under our new Privacy Policy.

Be sure to check out our Knowledgebase for helpful articles and solutions!
User avatar
benjaminsmith
 
Posts: 3454
Joined: Wed Aug 22, 2018 4:39 pm
Location: saint paul

Re: CHECK_NRPE: Error - Could not complete SSL handshake

Postby ashwin.samba » Mon Oct 19, 2020 12:26 am

after disabling the SSL issue got resolved
ashwin.samba
 
Posts: 4
Joined: Wed Jul 22, 2020 2:17 am

Re: CHECK_NRPE: Error - Could not complete SSL handshake

Postby scottwilkerson » Mon Oct 19, 2020 7:12 am

ashwin.samba wrote:after disabling the SSL issue got resolved

Great!

Locking thread
As of May 25th, 2018, all communications with Nagios Enterprises and its employees are covered under our new Privacy Policy.
User avatar
scottwilkerson
DevOps Engineer
 
Posts: 19020
Joined: Tue Nov 15, 2011 3:11 pm
Location: Nagios Enterprises


Return to Community Support

Who is online

Users browsing this forum: Google [Bot], Majestic-12 [Bot], marius4h, support@nagios.nl and 39 guests