xinetd[6199]: FAIL: nrpe per_source_limit from=ip_nagios
Posted: Fri May 06, 2011 9:33 am
I´m having a message error shown at my server log:
xinetd[6199]: FAIL: nrpe per_source_limit from=ip_nagios_server.
This message it´s shown at the log while my contacts receive multiple times at the day this message:
CHECK_NRPE: Error - Could not complete SSL handshake.
The NRPE version installed is v2.12
The product it's Nagios Core 3.2.1
I had reviewed the file from the monitored server: /etc/xinetd.d/nrpe.cfg because of the message also display in the server log:
the nrpe[14368]: Unable to open config file '/etc/xinetd.d/nrpe.cfg' from reading.
but i have the following (i didn´t modify this file): -rw-r--r-- 1 root root 475 May 26 2010 nrpe
# default: on
# description: NRPE (Nagios Remote Plugin Executor)
service nrpe
{
flags = REUSE
socket_type = stream
port = 5666
wait = no
user = nagios
group = nagios
server = /usr/local/nagios/bin/nrpe
server_args = -c /usr/local/nagios/etc/nrpe.cfg --inetd
log_on_failure += USERID
disable = no
only_from = 127.0.0.1 ip_nagios_server
}
Should i rebuild nrpe with ssl?? i can´t restart xinetd, i have all my services working.
As far as has had checked the others server that are monitored by Nagios uses the same configuration, but not showing this problem.
xinetd[6199]: FAIL: nrpe per_source_limit from=ip_nagios_server.
This message it´s shown at the log while my contacts receive multiple times at the day this message:
CHECK_NRPE: Error - Could not complete SSL handshake.
The NRPE version installed is v2.12
The product it's Nagios Core 3.2.1
I had reviewed the file from the monitored server: /etc/xinetd.d/nrpe.cfg because of the message also display in the server log:
the nrpe[14368]: Unable to open config file '/etc/xinetd.d/nrpe.cfg' from reading.
but i have the following (i didn´t modify this file): -rw-r--r-- 1 root root 475 May 26 2010 nrpe
# default: on
# description: NRPE (Nagios Remote Plugin Executor)
service nrpe
{
flags = REUSE
socket_type = stream
port = 5666
wait = no
user = nagios
group = nagios
server = /usr/local/nagios/bin/nrpe
server_args = -c /usr/local/nagios/etc/nrpe.cfg --inetd
log_on_failure += USERID
disable = no
only_from = 127.0.0.1 ip_nagios_server
}
Should i rebuild nrpe with ssl?? i can´t restart xinetd, i have all my services working.
As far as has had checked the others server that are monitored by Nagios uses the same configuration, but not showing this problem.