SNMP Zywall MIB VPN get error message!?

Support forum for Nagios Core, Nagios Plugins, NCPA, NRPE, NSCA, NDOUtils and more. Engage with the community of users including those using the open source solutions.
Locked
Atrolon
Posts: 2
Joined: Wed Aug 03, 2011 7:12 am

SNMP Zywall MIB VPN get error message!?

Post by Atrolon »

Hi

I am trying to get the status from the VPN tunnel running on my Zywall 5
MIB files are downloaded here: ftp://ftp.zyxel.dk/ZyWALL_5/mib_file/ZyWALL%205_1.zip
I have loaded the MIB files in to MIB browser to get to OID and test the commands works with my router.
And then copyied in to /usr/share/snmp/mibs/

I then try to run this command:

Code: Select all

# /usr/local/nagios/libexec/check_snmp -H 192.168.1.1 -C public -o .1.3.6.1.4.1.890.1.6.1.3.1.1.16 -m /usr/share/snmp/mibs/zyxel-zywall.mib
And this is what I get:

Code: Select all

External command error: Expected "(" (_): At line 542 in /usr/share/snmp/mibs/zyxel-zywall.mib
Should be ACCESS (TO): At line 542 in /usr/share/snmp/mibs/zyxel-zywall.mib
Bad parse of OBJECT-TYPE: At line 542 in /usr/share/snmp/mibs/zyxel-zywall.mib
Error in packet
Reason: (noSuchName) There is no such variable name in this MIB.
Failed object: ZYXEL-MIB::zywallCommon.3.1.1.16

I opende the MIB file in VI and this is line 542:

Code: Select all

	firewallDirIndex OBJECT-TYPE
		SYNTAX  INTEGER {
line 542 LAN_TO_WAN(1),
			WAN_TO_LAN(2),
			DMZ_TO_LAN(3),
			DMZ_TO_WAN(4),
			WAN_TO_DMZ(5),
			LAN_TO_DMZ(6),
			LAN_TO_LAN(7),
			WAN_TO_WAN(8),
			DMZ_TO_DMZ(9),
			LAN_TO_ROUTER(10),
			WAN_TO_ROUTER(11),
			DMZ_TO_ROUTER(12)
		}
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"The index of Firewall direction."
		::= { firewallDirEntry 1 }

other SMNP commands like this one:

Code: Select all

# /usr/local/nagios/libexec/check_snmp -H 192.168.1.1 -C public -o .1.3.6.1.2.1.1.3.0 -m ALL
Works perfectly

Hope someone have an idear of what is going wrong?

Thanks
Locked