I have a Nagios 3.3.1 server and client setup. I followed these instructions for the client setup and config …
http://www.thegeekstuff.com/2008/06/how ... nagios-30/
I run the following command on the server to see if tit can talk to the monitored client and it works.
[root@nagios libexec]# /usr/local/nagios/libexec/check_nrpe -H 10.167.148.60
NRPE v2.12
However, the client does not show up as an entry in the server GUI. Any idea why?
Thanks in advance.