ssl handshake error

[baber]

now i am useing that document but when ./configure this error appear

Code: Select all

[root@linux-3 nrpe-3.0]# ./configure
-bash: ./configure: Permission denied

and these are permissions

Code: Select all

[root@linux-3 nrpe-3.0]# ll
total 384
-rwxrwxr-x. 1 root root    283 Jul 13 00:54 aclocal.m4
drwxrwxr-x. 2 root root   4096 Jul 13 00:54 build-aux
-rw-rw-r--. 1 root root  13427 Jul 13 00:54 Changelog
-rwxrwxr-x. 1 root root 247968 Jul 13 00:54 configure
-rw-rw-r--. 1 root root  11198 Jul 13 00:54 configure.ac
drwxrwxr-x. 2 root root   4096 Jul 13 00:54 contrib
drwxrwxr-x. 2 root root   4096 Jul 13 00:54 docs
drwxrwxr-x. 2 root root   4096 Jul 13 00:54 include
-rw-rw-r--. 1 root root    441 Jul 13 00:54 LEGAL
drwxrwxr-x. 2 root root   4096 Jul 13 00:54 macros
-rw-rw-r--. 1 root root   6529 Jul 13 00:54 Makefile.in
-rw-rw-r--. 1 root root   7262 Jul 13 00:54 nrpe.spec.in
-rwxrwxr-x. 1 root root   3248 Jul 13 00:54 paths.in
-rw-rw-r--. 1 root root   7011 Jul 13 00:54 README.md
-rw-rw-r--. 1 root root  11738 Jul 13 00:54 README.SSL.md
drwxrwxr-x. 2 root root   4096 Jul 13 00:54 sample-config
-rw-rw-r--. 1 root root   3329 Jul 13 00:54 SECURITY.md
drwxrwxr-x. 2 root root   4096 Jul 13 00:54 src
drwxrwxr-x. 2 root root   4096 Jul 13 00:54 startup
-rw-rw-r--. 1 root root    623 Jul 13 00:54 THANKS
-rwxrwxr-x. 1 root root  10637 Jul 13 00:54 uninstall.in
-rwxrwxr-x. 1 root root   4326 Jul 13 00:54 update-cfg.pl
-rwxrwxr-x. 1 root root   2950 Jul 13 00:54 update-version

[avandemore]

What is the output of:

Code: Select all

[root@linux-3 nrpe-3.0]# pwd
[root@linux-3 nrpe-3.0]# cat /proc/mounts

[dwhitfield]

Looks like you downloaded 3.0, instead of 3.0.1. Just change the download to https://github.com/NagiosEnterprises/nr ... 0.1.tar.gz. The instructions say 3.0. I'm about to go figure out why. 3.0.1 was released in early September.

[baber]

What is the output of:

Code: Select all

[root@linux-3 nrpe-3.0]# pwd
[root@linux-3 nrpe-3.0]# cat /proc/mounts

Code: Select all

/tmp/nrpe-3.0

Code: Select all

rootfs / rootfs rw 0 0
proc /proc proc rw,relatime 0 0
sysfs /sys sysfs rw,seclabel,relatime 0 0
devtmpfs /dev devtmpfs rw,seclabel,relatime,size=8151432k,nr_inodes=2037858,mode=755 0 0
devpts /dev/pts devpts rw,seclabel,relatime,gid=5,mode=620,ptmxmode=000 0 0
tmpfs /dev/shm tmpfs rw,seclabel,nosuid,nodev,noexec,relatime 0 0
/dev/mapper/vg_srv-lv_root / ext4 rw,seclabel,relatime,barrier=1,data=ordered 0 0
none /selinux selinuxfs rw,relatime 0 0
devtmpfs /dev devtmpfs rw,seclabel,relatime,size=8151432k,nr_inodes=2037858,mode=755 0 0
/proc/bus/usb /proc/bus/usb usbfs rw,relatime 0 0
/dev/mapper/vg_srv-lv_backup /backup ext4 rw,seclabel,relatime,barrier=1,data=ordered 0 0
/dev/sda1 /boot ext4 rw,seclabel,relatime,barrier=1,data=ordered 0 0
/dev/mapper/vg_srv-lv_home /home ext4 rw,seclabel,nodev,relatime,barrier=1,data=ordered 0 0
/dev/mapper/vg_srv-lv_tmp /tmp ext4 rw,seclabel,nosuid,nodev,noexec,relatime,barrier=1,data=ordered 0 0
/dev/mapper/vg_srv-lv_u01 /u01 ext4 rw,seclabel,relatime,barrier=1,data=ordered 0 0
/dev/mapper/vg_srv-lv_var /var ext4 rw,seclabel,relatime,barrier=1,data=ordered 0 0
/dev/mapper/vg_srv-lv_log /var/log ext4 rw,seclabel,relatime,barrier=1,data=ordered 0 0
/dev/mapper/vg_srv-lv_audit /var/log/audit ext4 rw,seclabel,relatime,barrier=1,data=ordered 0 0
/dev/mapper/vg_srv-lv_tmp /var/tmp ext4 rw,seclabel,nosuid,nodev,noexec,relatime,barrier=1,data=ordered 0 0
none /proc/sys/fs/binfmt_misc binfmt_misc rw,relatime 0 0
none /sys/kernel/config configfs rw,relatime 0 0
/etc/auto.kb /net autofs rw,relatime,fd=6,pgrp=2880,timeout=60,minproto=5,maxproto=5,indirect 0 0
sunrpc /var/lib/nfs/rpc_pipefs rpc_pipefs rw,relatime 0 0
nfsd /proc/fs/nfsd nfsd rw,relatime 0 0
gvfs-fuse-daemon /root/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=0,group_id=0 0 0
/dev/sr0 /media/RHEL-6.8\040Server.x86_64 iso9660 ro,nosuid,nodev,relatime,uid=0,gid=0,iocharset=utf8,mode=0400,dmode=0500 0 0
/dev/loop0 /mnt/iso iso9660 ro,relatime 0 0
nfs:/u02/nfs /net/nfs nfs rw,relatime,vers=3,rsize=32768,wsize=32768,namlen=255,hard,proto=tcp,timeo=600,retrans=2,sec=sys,mountaddr=10.0.4.20,mountvers=3,mountport=855,mountproto=tcp,local_lock=none,addr=10.0.4.20 0 0

[dwhitfield]

Could you post the output of sestatus? Thanks!

[baber]

Could you post the output of sestatus? Thanks!

Code: Select all

SELinux status:                 enabled
SELinuxfs mount:                /selinux
Current mode:                   permissive
Mode from config file:          permissive
Policy version:                 24
Policy from config file:        targeted

[avandemore]

You're trying to execute a script which is on a file system mounted with the noexec option:

Code: Select all

/dev/mapper/vg_srv-lv_tmp /tmp ext4 rw,seclabel,nosuid,nodev,noexec,relatime,barrier=1,data=ordered 0 0

[dwhitfield]

You can run the compilation from another location. I like to use /var/tmp personally on Debian installs. Just note in the thread where you put it, so we can refer to it properly if there are issues.

[baber]

now i have installed nrpe3 but this error appear when run

Code: Select all

netstat -at | egrep nrpe|5666
-bash: 5666: command not found
getnameinfo failed
getnameinfo failed
getnameinfo failed
getnameinfo failed
getnameinfo failed
getnameinfo failed
getnameinfo failed
getnameinfo failed
getnameinfo failed
getnameinfo failed
getnameinfo failed
getnameinfo failed
getnameinfo failed
getnameinfo failed
getnameinfo failed
getnameinfo failed
getnameinfo failed
getnameinfo failed
getnameinfo failed
getnameinfo failed
getnameinfo failed
getnameinfo failed
getnameinfo failed
getnameinfo failed
getnameinfo failed
getnameinfo failed
getnameinfo failed
getnameinfo failed
getnameinfo failed
getnameinfo failed
getnameinfo failed
getnameinfo failed
getnameinfo failed
getnameinfo failed
getnameinfo failed
[root@linux nrpe-3.0]#

[dwhitfield]

getnameinfo is simply stating that it could not resolve a dns name to an IP. Is your dns server accessible? As for the 5666...just try running the command without the 5666.

When you say you are running npre, is /usr/local/nagios/libexec/check_nrpe -H localhost the command you are using? If not, could you post the command?