Fujitsu servers
Re: Fujitsu servers
Can you poll the server directly without using the iRMC interface?
Be sure to check out our Knowledgebase for helpful articles and solutions!
Re: Fujitsu servers
If you mean to execute the command without -A argument, i cant.
Infra3 as server runs windows server 2012 r2 and at the os has a diferent ip so i cant.
the above command does not work
Infra3 as server runs windows server 2012 r2 and at the os has a diferent ip so i cant.
Code: Select all
./check_fujitsu_server.pl -H Infra3 -t 120 -C public --chkenv-fan
Re: Fujitsu servers
What version of Net::SNMP package is installed in the server that is working versus the one that is not?
Maybe is is a version issue for that package causing the issue.
When the --chkenv-fan option is used, it is will pool the server using the OID below, can you run the following command and post the output?
Maybe is is a version issue for that package causing the issue.
When the --chkenv-fan option is used, it is will pool the server using the OID below, can you run the following command and post the output?
Code: Select all
time snmpwalk 10.0.5.17 -v 2c -c public 1.3.6.1.4.1.211.1.31.1.1.1.8.
Be sure to check out our Knowledgebase for helpful articles and solutions!
Re: Fujitsu servers
The output of the command is
All servers have the same version of snmp.
Both servers, some times work and some times dont
Code: Select all
time snmpwalk 10.0.5.17 -v 2c -c public 1.3.6.1.4.1.211.1.31.1.1.1.8.
1.3.6.1.4.1.211.1.31.1.1.1.8.: Unknown Object Identifier (Sub-id not found: enterprises -> )
real 0m1.249s
user 0m0.142s
sys 0m0.296s
Both servers, some times work and some times dont
Re: Fujitsu servers
It it is intermittent, it will be hard to troubleshoot. Try running this and see if this returns any information
Do you see any errors on the Fujitsu server at all?
Code: Select all
snmpwalk 10.0.5.17 -v 2c -c public 1.3.6.1.4.1.211.1.31.1.1.1.8 -m ALL
Be sure to check out our Knowledgebase for helpful articles and solutions!
Re: Fujitsu servers
No errors at Fujitsu servers.
Code: Select all
[root@telematics ~]# snmpwalk 10.0.5.17 -v 2c -c public 1.3.6.1.4.1.211.1.31.1.1.1.8 -m ALL
RFC1155-SMI::enterprises.211.1.31.1.1.1.8 = No Such Object available on this agent at this OID
Re: Fujitsu servers
Try running the following until it responds with some valid information.
How many did you run it before it returned information?
Can you run this as well and post the output?
Code: Select all
snmpwalk 10.0.5.17 -v 2c -c public
Can you run this as well and post the output?
Code: Select all
nmap 10.0.5.17 -sU -p 161
Be sure to check out our Knowledgebase for helpful articles and solutions!
Re: Fujitsu servers
snmpwalk gets the attachment by the first attempt
Code: Select all
[root@telematics ~]# nmap 10.0.5.17 -sU -p 161
Starting Nmap 5.51 ( http://nmap.org ) at 2017-01-28 00:06 EET
Nmap scan report for 10.0.5.17
Host is up (0.0019s latency).
PORT STATE SERVICE
161/udp open snmp
MAC Address: 70:E2:84:0B:56:E8 (Unknown)
Nmap done: 1 IP address (1 host up) scanned in 3.40 seconds
[root@telematics ~]#
Re: Fujitsu servers
I don't know why your Fujitsu server sometimes responds and sometimes it does not. Check and see if there are any settings on the server for permissions, timeout, etc that you can adjust to see if you can get it to respond better.
Also, run the following on the Nagios server and post the output.
Also, run the following on the Nagios server and post the output.
Code: Select all
snmpwalk 10.0.5.17 -v 2c -c public 1.3.6.1.4.1.211.1.31
Be sure to check out our Knowledgebase for helpful articles and solutions!
Re: Fujitsu servers
i update the firmware of the irmc, restarted the server and the irmc and seems that the problem solved. i did this at only one of the 21 i got. i did it a few minutes earlier so i will wait to see if it is actually solved and i will get back to you