But after I tried to apply service check_iftrafic, at 'Status Information' on Service page, it show "(No output on stdout) stderr:"
It's weird, because I can get the output from original check_iftraffic64.pl
Code: Select all
[root@osboxes etc]# /usr/local/nagios/libexec/check_iftraffic64.pl -H 192.168.99.253 -C <XXXXXX> -i GigabitEthernet1/0/1 -r -b 1000 -u m -B -f
OK - Average IN: 132.08b (0.00%), Average OUT: 515.28b (0.00%)Total RX: 464.00Mbits, Total TX: 4.54Gbits|inUsage=0.00%;85;98 outUsage=0.00%;85;98 inBandwidth=16.51B outBandwidth=64.41B inAbsolut=57999689c outAbsolut=567085849c
chown -R nagios:nagios check_iftraffic64.pl
chmod 750 check_iftraffic64.pl
Code: Select all
[root@osboxes etc]# ls -l /usr/local/nagios/libexec/check_iftraffic64.pl
-rwxr-x---. 1 nagios nagios 39106 Jan 6 02:53 /usr/local/nagios/libexec/check_iftraffic64.pl
Code: Select all
[root@osboxes etc]# /usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfg
Nagios Core 4.2.4
Copyright (c) 2009-present Nagios Core Development Team and Community Contributors
Copyright (c) 1999-2009 Ethan Galstad
Last Modified: 12-07-2016
License: GPL
Website: https://www.nagios.org
Reading configuration data...
Read main config file okay...
Read object config files okay...
Running pre-flight check on configuration data...
Checking objects...
Checked 15 services.
Checked 3 hosts.
Checked 2 host groups.
Checked 0 service groups.
Checked 1 contacts.
Checked 1 contact groups.
Checked 27 commands.
Checked 5 time periods.
Checked 0 host escalations.
Checked 0 service escalations.
Checking for circular paths...
Checked 3 hosts
Checked 0 service dependencies
Checked 0 host dependencies
Checked 5 timeperiods
Checking global event handlers...
Checking obsessive compulsive processor commands...
Checking misc settings...
Total Warnings: 0
Total Errors: 0
Things look okay - No serious problems were detected during the pre-flight check
[root@osboxes etc]# perl ~/verify_pnp_config --mode bulk+npcd --config=/usr/local/nagios/etc/nagios.cfg --pnpcfg=/usr/local/pnp4nagios/etc
[INFO] ========== Starting Environment Checks ============
[INFO] My version is: verify_pnp_config-0.6.25-R.40
[INFO] Start Options: /root/verify_pnp_config --mode bulk+npcd --config=/usr/local/nagios/etc/nagios.cfg --pnpcfg=/usr/local/pnp4nagios/etc
[INFO] Reading /usr/local/nagios/etc/nagios.cfg
[OK ] Running product is 'nagios'
[OK ] object_cache_file is defined
[OK ] object_cache_file=/usr/local/nagios/var/objects.cache
[INFO] Reading /usr/local/nagios/var/objects.cache
[OK ] resource_file is defined
[OK ] resource_file=/usr/local/nagios/etc/resource.cfg
[INFO] Reading /usr/local/nagios/etc/resource.cfg
[INFO] Reading /usr/local/pnp4nagios/etc/process_perfdata.cfg
[INFO] Reading /usr/local/pnp4nagios/etc/pnp4nagios_release
[OK ] Found PNP4Nagios version "0.6.25"
[OK ] Effective User is 'nagios'
[OK ] User nagios exists with ID '1001'
[OK ] Effective group is 'nagios'
[OK ] Group nagios exists with ID '1001'
[INFO] ========== Checking Bulk Mode + NPCD Config ============
[OK ] process_performance_data is 1 compared with '/1/'
[OK ] service_perfdata_file is defined
[OK ] service_perfdata_file=/usr/local/pnp4nagios/var/service-perfdata
[OK ] service_perfdata_file_template is defined
[OK ] service_perfdata_file_template=DATATYPE::SERVICEPERFDATA\tTIMET::$TIMET$\tHOSTNAME::$HOSTNAME$\tSERVICEDESC::$SERVICEDESC$\tSERVICEPERFDATA::$SERVICEPERFDATA$\tSERVICECH$
[OK ] PERFDATA template looks good
[OK ] service_perfdata_file_mode is defined
[OK ] service_perfdata_file_mode=a
[OK ] service_perfdata_file_processing_interval is defined
[OK ] service_perfdata_file_processing_interval=15
[OK ] service_perfdata_file_processing_command is defined
[OK ] service_perfdata_file_processing_command=process-service-perfdata-file
[OK ] host_perfdata_file is defined
[OK ] host_perfdata_file=/usr/local/pnp4nagios/var/host-perfdata
[OK ] host_perfdata_file_template is defined
[OK ] host_perfdata_file_template=DATATYPE::HOSTPERFDATA\tTIMET::$TIMET$\tHOSTNAME::$HOSTNAME$\tHOSTPERFDATA::$HOSTPERFDATA$\tHOSTCHECKCOMMAND::$HOSTCHECKCOMMAND$\tHOSTSTATE::$
[OK ] PERFDATA template looks good
[OK ] host_perfdata_file_mode is defined
[OK ] host_perfdata_file_mode=a
[OK ] host_perfdata_file_processing_interval is defined
[OK ] host_perfdata_file_processing_interval=15
[OK ] host_perfdata_file_processing_command is defined
[OK ] host_perfdata_file_processing_command=process-host-perfdata-file
[INFO] Nagios config looks good so far
[INFO] ========== Checking config values ============
[OK ] npcd daemon is running
[OK ] /usr/local/pnp4nagios/etc/npcd.cfg is used by npcd and readable
[INFO] Reading /usr/local/pnp4nagios/etc/npcd.cfg
[OK ] perfdata_spool_dir is defined
[OK ] perfdata_spool_dir=/usr/local/pnp4nagios/var/spool
[OK ] 2 files found in /usr/local/pnp4nagios/var/spool
service_perfdata_file_processing_command at /root/verify_pnp_config line 462.
[OK ] Command process-service-perfdata-file is defined
[OK ] '/bin/mv /usr/local/pnp4nagios/var/service-perfdata /usr/local/pnp4nagios/var/spool/service-perfdata.$TIMET$'
[OK ] Command looks good
host_perfdata_file_processing_command at /root/verify_pnp_config line 462.
[OK ] Command process-host-perfdata-file is defined
[OK ] '/bin/mv /usr/local/pnp4nagios/var/host-perfdata /usr/local/pnp4nagios/var/spool/host-perfdata.$TIMET$'
[OK ] Command looks good
[OK ] Script /usr/local/pnp4nagios/libexec/process_perfdata.pl is executable
[INFO] ========== Starting global checks ============
[OK ] status_file is defined
[OK ] status_file=/usr/local/nagios/var/status.dat
[INFO] host_query =
[INFO] service_query =
[INFO] Reading /usr/local/nagios/var/status.dat
[INFO] ==== Starting rrdtool checks ====
[OK ] RRDTOOL is defined
[OK ] RRDTOOL=/bin/rrdtool
[OK ] /bin/rrdtool is executable
[OK ] RRDtool 1.4.8 Copyright 1997-2013 by Tobias Oetiker <tobi@oetiker.ch>
[OK ] USE_RRDs is defined
[OK ] USE_RRDs=1
[OK ] Perl RRDs modules are loadable
[INFO] ==== Starting directory checks ====
[OK ] RRDPATH is defined
[OK ] RRDPATH=/usr/local/pnp4nagios/var/perfdata
[OK ] Perfdata directory '/usr/local/pnp4nagios/var/perfdata' exists
[WARN] 4 hosts/services are not providing performance data
[WARN] 'process_perf_data 1' is set for 5 hosts/services which are not providing performance data!
[OK ] 'process_perf_data 1' is set for 19 of your hosts/services
[INFO] ==== System sizing ====
[OK ] 18 hosts/service objects defined
[INFO] ==== Check statistics ====
[WARN] Warning: 2, Critical: 0
[WARN] Checks finished...Code: Select all
'check_iftraffic' command definition
define command{
command_name check_iftraffic64
command_line $USER1$/check_iftraffic64.pl -H $HOSTADDRESS$ -C $ARG1$ -i $ARG2$ -r -b 1000 -u m -B -f
}
Code: Select all
define host{
use generic-switch,host-pnp ; Inherit default values from a template
host_name NPRDPUKHASW01 ; The name we're giving to this switch
alias NPRDPUKHASW01 Switch ; A longer name associated with the switch
address 192.168.99.253 ; IP address of the switch
hostgroups switches ; Host groups this switch is associated with
}
define service {
use generic-service,srv-pnp ; Inherit values from a template
host_name NPRDPUKHASW01
service_description Gi1/0/3 Traffic Load
check_command check_iftraffic64!<XXXXXX>!GigabitEthernet1/0/3
max_check_attempts 3
normal_check_interval 5
retry_check_interval 5
}
Code: Select all
# Sets $USER1$ to be the path to the plugins
$USER1$=/usr/local/nagios/libexec
I had attached nagios.cfg, if want any file or verify more please tell me.
A switch is Cisco Catalyst 2960-X. I use Nagios Core 4.2.4, Nagios Plugin 2.1.4, PNP4Nagios-0.6.24.
Thank you very much.
