check_nrpe status information (null)

An open discussion forum for obtaining help with Nagios Core. Nagios Core users of all experience levels are welcome here. Subforum have been created for the discussion of Nagios Core and Nagios Plugin development.

NOTE: The SourceForge.net mailing lists have been deprecated in favor of this forum in order to expedite support and provide additional features not available on the old mailing list.

check_nrpe status information (null)

Postby Rhobar » Wed May 10, 2017 9:07 am

Hi all,

I searched in old posts but I did not found a solution for my problem.

I'm trying to monitor a windows machine cpu using nsclient++ (NSCP-0.4.1.73-x64) but I get "(null)" result on my status information.

If I try to check it manually from my nagios server I get no problems:
Code: Select all
[root@vmnagios plugins]# /usr/lib64/nagios/plugins/check_nrpe -H 10.10.3.50 -c alias_cpu
OK CPU Load ok.|'5m'=3%;80;90 '1m'=3%;80;90 '30s'=3%;80;90


Here there are:
Code: Select all
my command definition:
        define command{
        command_name    check_win_cpu
        command_line    $USER1$/check_nrpe -c alias_cpu -H $HOSTADRESS$
        }

the service defined on machine:
define service{
        use                             local-service         ; Name of service template to use
        host_name                       w3vcs02
        service_description             check_win_cpu
        check_command                   check_win_cpu
        }

ini file on machine:
; alias_cpu - Alias for alias_cpu. To configure this item add a section called: /settings/external scripts/alias/alias_cpu
alias_cpu = checkCPU warn=80 crit=90 time=5m time=1m time=30s




At the same time I'm monitoring disk and other stuff without problems.

Thank you in advance :)
Rhobar
 
Posts: 41
Joined: Sat Mar 16, 2013 9:23 am
Location: Rome, Italy

Re: check_nrpe status information (null)

Postby lmiltchev » Wed May 10, 2017 11:50 am

Can you post the entire nsclient.ini (NSC.ini) file, along with the config definitions for the "w3vcs02" host, and the "local-service" template?
Be sure to check out our Knowledgebase for helpful articles and solutions!
User avatar
lmiltchev
QA Manager
 
Posts: 9428
Joined: Mon May 23, 2011 12:15 pm

Re: check_nrpe status information (null)

Postby Rhobar » Thu May 11, 2017 3:19 am

Hi!

local service is defined as default in templates.cfg file:
Code: Select all
# Local service definition template - This is NOT a real service, just a template!

define service{
        name                            local-service           ; The name of this service template
        use                             generic-service         ; Inherit default values from the generic-service definition
        max_check_attempts              4                       ; Re-check the service up to 4 times in order to determine its final (hard) state
        normal_check_interval           5                       ; Check the service every 5 minutes under normal conditions
        retry_check_interval            1                       ; Re-check the service every minute until a hard state can be determined
        register                        0                       ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL SERVICE, JUST A TEMPLATE!
        }


this is the .ini file on monitored windows host:
Code: Select all
# If you want to fill this file with all avalible options run the following command:
#   nscp settings --generate --add-defaults --load-all
# If you want to activate a module and bring in all its options use:
#   nscp settings --activate-module <MODULE NAME> --add-defaults
# For details run: nscp settings --help


; Undocumented section
[/modules]

; CheckDisk - CheckDisk can check various file and disk related things. The current version has commands to check Size of hard drives and directories.
CheckDisk = 1

; Event log Checker. - Check for errors and warnings in the event log. This is only supported through NRPE so if you plan to use only NSClient this wont help you at all.
CheckEventLog = 1

; Check External Scripts - A simple wrapper to run external scripts and batch files.
CheckExternalScripts = 1

; Helper function - Various helper function to extend other checks. This is also only supported through NRPE.
CheckHelpers = 1

; Event log Checker. - Check for errors and warnings in the event log. This is only supported through NRPE so if you plan to use only NSClient this wont help you at all.
CheckLogFile = enabled

; Check NSCP - Checkes the state of the agent
CheckNSCP = 1

; CheckSystem - Various system related checks, such as CPU load, process state, service state memory usage and PDH counters.
CheckSystem = 1

; CheckTaskSched - CheckTaskSched can check various file and disk related things. The current version has commands to check Size of hard drives and directories.
CheckTaskSched = 0

; CheckTaskSched2 - CheckTaskSched2 can check various file and disk related things. The current version has commands to check Size of hard drives and directories.
CheckTaskSched2 = 0

; CheckWMI - CheckWMI can check various file and disk related things. The current version has commands to check Size of hard drives and directories.
CheckWMI = 1

; DotnetPlugin - Plugin to load and manage plugins written in dot net.
DotnetPlugins = 0

; GraphiteClient - Graphite client
GraphiteClient = 0

; LUAScript - LUAScript...
LUAScript = 0

; NRDPClient - Passive check support over NRDP
NRDPClient = 0

; NRPE client - NRPE client
NRPEClient = 0

; NRPE server - A simple server that listens for incoming NRPE connection and handles them.
NRPEServer = 1

; NSCAClient - Passive check support over NSCA.
NSCAClient = 1

; NSCA server (no encryption) - A simple server that listens for incoming NSCA connection and handles them.
NSCAServer = 0

; NSClient server - A simple server that listens for incoming NSClient (check_nt) connection and handles them. Although NRPE is the preferred method NSClient is fully supported and can be used for simplicity or for compatibility.
NSClientServer = 1

; SMTPClient - Passive check support via SMTP
SMTPClient = 0

; Scheduler - A scheduler which schedules checks at regular intervals
Scheduler = 0

; SimpleCache module - Caches results for later checking.
SimpleCache = 0

; SimpleFileWriter module - FileWriters results for later checking.
SimpleFileWriter = 0

; SyslogClient - Passive check support via Syslog
SyslogClient = 0


; Undocumented section
[/settings/default]

; ALLOWED CIPHERS - A better value is: ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH
allowed ciphers = ADH

; ALLOWED HOSTS - A comaseparated list of allowed hosts. You can use netmasks (/ syntax) or * to create ranges.
allowed hosts = 10.10.3.79

; CACHE ALLOWED HOSTS - If hostnames should be cached, improves speed and security somewhat but wont allow you to have dynamic IPs for your nagios server.
cache allowed hosts = true

; SSL CERTIFICATE -
certificate =

; INBOX - The default channel to post incoming messages on
inbox = inbox

; PASSWORD - Password used to authenticate againast server
password =

; TIMEOUT - Timeout when reading packets on incoming sockets. If the data has not arrived within this time we will bail out.
timeout = 30

; ENABLE SSL ENCRYPTION - This option controls if SSL should be enabled.
use ssl = true

; VERIFY MODE -
verify mode = none


; A list of aliases available. An alias is an internal command that has been "wrapped" (to add arguments). Be careful so you don't create loops (ie check_loop=check_a, check_a=check_loop)
[/settings/external scripts/alias]

; alias_cpu - Alias for alias_cpu. To configure this item add a section called: /settings/external scripts/alias/alias_cpu
alias_cpu = checkCPU warn=80 crit=90 time=5m time=1m time=30s

; alias_cpu_ex - Alias for alias_cpu_ex. To configure this item add a section called: /settings/external scripts/alias/alias_cpu_ex
alias_cpu_ex = checkCPU warn=$ARG1$ crit=$ARG2$ time=5m time=1m time=30s

; alias_disk - Alias for alias_disk. To configure this item add a section called: /settings/external scripts/alias/alias_disk
alias_disk = CheckDriveSize MinWarn=10% MinCrit=5% CheckAll FilterType=FIXED

; alias_disk_loose - Alias for alias_disk_loose. To configure this item add a section called: /settings/external scripts/alias/alias_disk_loose
alias_disk_loose = CheckDriveSize MinWarn=10% MinCrit=5% CheckAll FilterType=FIXED ignore-unreadable

; alias_event_log - Alias for alias_event_log. To configure this item add a section called: /settings/external scripts/alias/alias_event_log
alias_event_log = CheckEventLog file=application file=system MaxWarn=1 MaxCrit=1 "filter=generated gt -2d AND severity NOT IN ('success', 'informational') AND source != 'SideBySide'" truncate=800 unique descriptions "syntax=%severity%: %source%: %message% (%count%)"

; alias_file_age - Alias for alias_file_age. To configure this item add a section called: /settings/external scripts/alias/alias_file_age
alias_file_age = checkFile2 filter=out "file=$ARG1$" filter-written=>1d MaxWarn=1 MaxCrit=1 "syntax=%filename% %write%"

; alias_file_size - Alias for alias_file_size. To configure this item add a section called: /settings/external scripts/alias/alias_file_size
alias_file_size = CheckFiles "filter=size > $ARG2$" "path=$ARG1$" MaxWarn=1 MaxCrit=1 "syntax=%filename% %size%" max-dir-depth=10

; alias_mem - Alias for alias_mem. To configure this item add a section called: /settings/external scripts/alias/alias_mem
alias_mem = checkMem MaxWarn=80% MaxCrit=90% ShowAll=long type=physical type=virtual type=paged type=page

; alias_process - Alias for alias_process. To configure this item add a section called: /settings/external scripts/alias/alias_process
alias_process = checkProcState "$ARG1$=started"

; alias_process_count - Alias for alias_process_count. To configure this item add a section called: /settings/external scripts/alias/alias_process_count
alias_process_count = checkProcState MaxWarnCount=$ARG2$ MaxCritCount=$ARG3$ "$ARG1$=started"

; alias_process_hung - Alias for alias_process_hung. To configure this item add a section called: /settings/external scripts/alias/alias_process_hung
alias_process_hung = checkProcState MaxWarnCount=1 MaxCritCount=1 "$ARG1$=hung"

; alias_process_stopped - Alias for alias_process_stopped. To configure this item add a section called: /settings/external scripts/alias/alias_process_stopped
alias_process_stopped = checkProcState "$ARG1$=stopped"

; alias_sched_all - Alias for alias_sched_all. To configure this item add a section called: /settings/external scripts/alias/alias_sched_all
alias_sched_all = CheckTaskSched "filter=exit_code ne 0" "syntax=%title%: %exit_code%" warn=>0

; alias_sched_long - Alias for alias_sched_long. To configure this item add a section called: /settings/external scripts/alias/alias_sched_long
alias_sched_long = CheckTaskSched "filter=status = 'running' AND most_recent_run_time < -$ARG1$" "syntax=%title% (%most_recent_run_time%)" warn=>0

; alias_sched_task - Alias for alias_sched_task. To configure this item add a section called: /settings/external scripts/alias/alias_sched_task
alias_sched_task = CheckTaskSched "filter=title eq '$ARG1$' AND exit_code ne 0" "syntax=%title% (%most_recent_run_time%)" warn=>0

; alias_service - Alias for alias_service. To configure this item add a section called: /settings/external scripts/alias/alias_service
alias_service = checkServiceState CheckAll

; alias_service_ex - Alias for alias_service_ex. To configure this item add a section called: /settings/external scripts/alias/alias_service_ex
alias_service_ex = checkServiceState CheckAll "exclude=Net Driver HPZ12" "exclude=Pml Driver HPZ12" exclude=stisvc

; alias_up - Alias for alias_up. To configure this item add a section called: /settings/external scripts/alias/alias_up
alias_up = checkUpTime MinWarn=1d MinWarn=1h

; alias_updates - Alias for alias_updates. To configure this item add a section called: /settings/external scripts/alias/alias_updates
alias_updates = check_updates -warning 0 -critical 0

; alias_volumes - Alias for alias_volumes. To configure this item add a section called: /settings/external scripts/alias/alias_volumes
alias_volumes = CheckDriveSize MinWarn=10% MinCrit=5% CheckAll=volumes FilterType=FIXED

; alias_volumes_loose - Alias for alias_volumes_loose. To configure this item add a section called: /settings/external scripts/alias/alias_volumes_loose
alias_volumes_loose = CheckDriveSize MinWarn=10% MinCrit=5% CheckAll=volumes FilterType=FIXED ignore-unreadable

; default - Alias for default. To configure this item add a section called: /settings/external scripts/alias/default
default =


; List all dot net modules loaded by the DotNetplugins module here
[/modules/dotnet]


; Section for SMTP passive check module.
[/settings/NRDP/client]

; CHANNEL - The channel to listen to.
channel = NRDP

; HOSTNAME - The host name of this host if set to blank (default) the windows name of the computer will be used.
hostname = auto


; Target definition for: default
[/settings/NRDP/client/targets/default]

; TARGET ADDRESS - Target host address
address =

; RECIPIENT - Recipient of email message
recipient = nscp@localhost

; SENDER - Sender of email message
sender = nscp@localhost

; TEMPLATE - Template for message data
template = Hello, this is %source% reporting %message%!

; TIMEOUT - Timeout when reading/writing packets to/from sockets.
timeout = 30


; Section for NRPE active/passive check module.
[/settings/NRPE/client]

; CHANNEL - The channel to listen to.
channel = NRPE


; Target definition for: default
[/settings/NRPE/client/targets/default]

; TARGET ADDRESS - Target host address
address =

; ALLOWED CIPHERS - A better value is: ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH
allowed ciphers = ADH

; SSL CERTIFICATE -
certificate =

; PAYLOAD LENGTH - Length of payload to/from the NRPE agent. This is a hard specific value so you have to "configure" (read recompile) your NRPE agent to use the same value for it to work.
payload length = 1024

; TIMEOUT - Timeout when reading/writing packets to/from sockets.
timeout = 30

; ENABLE SSL ENCRYPTION - This option controls if SSL should be enabled.
use ssl = true

; VERIFY MODE -
verify mode = none


; Section for NRPE (NRPEServer.dll) (check_nrpe) protocol options.
[/settings/NRPE/server]

; COMMAND ARGUMENT PROCESSING - This option determines whether or not the we will allow clients to specify arguments to commands that are executed.
allow arguments = true

; COMMAND ALLOW NASTY META CHARS - This option determines whether or not the we will allow clients to specify nasty (as in |`&><'"\[]{}) characters in arguments.
allow nasty characters = false

; PORT NUMBER - Port to use for NRPE.
port = 5666


; Section for NSCA passive check module.
[/settings/NSCA/client]

; CHANNEL - The channel to listen to.
channel = NSCA

; HOSTNAME - The host name of this host if set to blank (default) the windows name of the computer will be used.
hostname = auto


; Target definition for: default
[/settings/NSCA/client/targets/default]

; TARGET ADDRESS - Target host address
address =

; ALLOWED CIPHERS - A better value is: ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH
allowed ciphers = ADH

; SSL CERTIFICATE -
certificate =

; ENCRYPTION METHOD - Number corresponding to the various encryption algorithms (see the wiki). Has to be the same as the server or it wont work at all.
encryption = aes

; PASSWORD - The password to use. Again has to be the same as the server or it wont work at all.
password =

; TIMEOUT - Timeout when reading/writing packets to/from sockets.
timeout = 30

; ENABLE SSL ENCRYPTION - This option controls if SSL should be enabled.
use ssl = false

; VERIFY MODE -
verify mode = none


; Section for NSCA (NSCAServer) (check_nsca) protocol options.
[/settings/NSCA/server]

; ENCRYPTION - Encryption to use
encryption = aes

; PASSWORD - Password to use
password =

; PAYLOAD LENGTH - Length of payload to/from the NSCA agent. This is a hard specific value so you have to "configure" (read recompile) your NSCA agent to use the same value for it to work.
payload length = 512

; PERFORMANCE DATA - Send performance data back to nagios (set this to 0 to remove all performance data).
performance data = true

; PORT NUMBER - Port to use for NSCA.
port = 5667

; ENABLE SSL ENCRYPTION - This option controls if SSL should be enabled.
use ssl = false


; Section for NSClient (NSClientServer.dll) (check_nt) protocol options.
[/settings/NSClient/server]

; PERFORMANCE DATA - Send performance data back to nagios (set this to 0 to remove all performance data).
performance data = true

; PORT NUMBER - Port to use for check_nt.
port = 12489


; Section for SMTP passive check module.
[/settings/SMTP/client]

; CHANNEL - The channel to listen to.
channel = SMTP


; Target definition for: default
[/settings/SMTP/client/targets/default]

; TARGET ADDRESS - Target host address
address =

; RECIPIENT - Recipient of email message
recipient = nscp@localhost

; SENDER - Sender of email message
sender = nscp@localhost

; TEMPLATE - Template for message data
template = Hello, this is %source% reporting %message%!

; TIMEOUT - Timeout when reading/writing packets to/from sockets.
timeout = 30


; Section for simple cache module (SimpleCache.dll).
[/settings/cache]

; CHANNEL - The channel to listen to.
channel = CACHE

; PRIMARY CACHE INDEX - Set this to the value you want to use as unique key for the cache (host, command, result,...).
primary index = ${alias-or-command}


; Section for
checks and system settings
[/settings/check/task schedule]

; SYNTAX - Set this to use a specific syntax string for all commands (that don't specify one)
default buffer length = %title% last run: %most-recent-run-time% (%exit-code%)


; Configure crash handling properties.
[/settings/crash]

; ARCHIVE CRASHREPORTS - Archive crash reports in the archive folder
archive = true

; folder - The archive folder for crash dunpes.
archive folder = ${shared-path}/crash-dumps

; RESTART - Submit crash reports to nsclient.org (or your configured submission server)
restart = true

; RESTART SERVICE NAME - The url to submit crash reports to
restart target = NSClientpp

; SUBMIT CRASHREPORTS - Submit crash reports to nsclient.org (or your configured submission server)
submit = false

; SUBMISSION URL - The url to submit crash reports to
submit url = http://crash.nsclient.org/submit


; Section for the EventLog Checker (CheckEventLog.dll).
[/settings/eventlog]

; BUFFER_SIZE - The size of the buffer to use when getting messages this affects the speed and maximum size of messages you can recieve.
buffer size = 131072

; DEBUG - Log more information when filtering (usefull to detect issues with filters) not usefull in production as it is a bit of a resource hog.
debug = false

; LOOKUP NAMES - Lookup the names of eventlog files
lookup names = true

; SYNTAX - Set this to use a specific syntax string for all commands (that don't specify one).
syntax =


; A set of options to configure the real time checks
[/settings/eventlog/real-time]

; DEBUG - Log missed records (usefull to detect issues with filters) not usefull in production as it is a bit of a resource hog.
debug = false

; REAL TIME CHECKING - Spawns a backgrounnd thread which detects issues and reports them back instantly.
enabled = false

; LOGS TO CHECK - Comma separated list of logs to check
log = application,system

; STARTUP AGE - The initial age to scan when starting NSClient++
startup age = 30m


; A set of filters to use in real-time mode
[/settings/eventlog/real-time/filters]


; Section for external scripts configuration options (CheckExternalScripts).
[/settings/external scripts]

; COMMAND ARGUMENT PROCESSING - This option determines whether or not the we will allow clients to specify arguments to commands that are executed.
allow arguments = false

; COMMAND ALLOW NASTY META CHARS - This option determines whether or not the we will allow clients to specify nasty (as in |`&><'"\[]{}) characters in arguments.
allow nasty characters = false

; SCRIPT DIRECTORY - Load all scripts in a directory and use them as commands. Probably dangerous but useful if you have loads of scripts :)
script path =

; COMMAND TIMEOUT - The maximum time in seconds that a command can execute. (if more then this execution will be aborted). NOTICE this only affects external commands not internal ones.
timeout = 60


; A list of scripts available to run from the CheckExternalScripts module. Syntax is: <command>=<script> <arguments>
[/settings/external scripts/scripts]


; A list of wrappped scripts (ie. using the template mechanism)
[/settings/external scripts/wrapped scripts]


; A list of templates for wrapped scripts
[/settings/external scripts/wrappings]

; BATCH FILE WRAPPING -
bat = scripts\\%SCRIPT% %ARGS%

; POWERSHELL WRAPPING -
ps1 = cmd /c echo scripts\\%SCRIPT% %ARGS%; exit($lastexitcode) | powershell.exe -command -

; VISUAL BASIC WRAPPING -
vbs = cscript.exe //T:30 //NoLogo scripts\\lib\\wrapper.vbs %SCRIPT% %ARGS%


; Section for graphite passive check module.
[/settings/graphite/client]

; CHANNEL - The channel to listen to.
channel = GRAPHITE

; HOSTNAME - The host name of this host if set to blank (default) the windows name of the computer will be used.
hostname = auto


; Target definition for: default
[/settings/graphite/client/targets/default]

; TARGET ADDRESS - Target host address
address =

; PATH FOR VALUES -
path = system.${hostname}.${check_alias}.${perf_alias}


; Section for configuring the log handling.
[/settings/log]

; DATEMASK - The size of the buffer to use when getting messages this affects the speed and maximum size of messages you can recieve.
date format = %Y-%m-%d %H:%M:%S

; FILENAME - The file to write log data to. Set this to none to disable log to file.
file name = ${exe-path}/nsclient.log

; LOG LEVEL - Log level to use. Avalible levels are error,warning,info,debug,trace
level = info


; Configure log file properties.
[/settings/log/file]

; MAXIMUM FILE SIZE - When file size reaches this it will be truncated to 50% if set to 0 (default) truncation will be disabled
max size = 0


; Section for log file checker
[/settings/logfile]

; DEBUG - Log more information to help diagnose errors and configuration problems.
debug = false

; SYNTAX - Set the default syntax to use
syntax =


; A set of options to configure the real time checks
[/settings/logfile/real-time]
enabled = true

; REAL TIME CHECKING - Spawns a backgrounnd thread which waits for file changes.
enabled = false


; A set of filters to use in real-time mode
[/settings/logfile/real-time/checks]


; Section for the LUAScripts module.
[/settings/lua]


; A list of scripts available to run from the LuaSCript module.
[/settings/lua/scripts]


; Section for the Scheduler module.
[/settings/scheduler]

; THREAD COUNT - Number of threads to use.
threads = 5


; Section for the Scheduler module.
[/settings/scheduler/schedules]


; Section for configuring the shared session.
[/settings/shared session]

; LOG LEVEL - Log level to use
enabled = false


; Section for SYSLOG passive check module.
[/settings/syslog/client]

; CHANNEL - The channel to listen to.
channel = syslog

; HOSTNAME - The host name of this host if set to blank (default) the windows name of the computer will be used.
hostname =


; Target definition for: default
[/settings/syslog/client/targets/default]

; TARGET ADDRESS - Target host address
address =

; TODO -
critical severity = critical

; TODO -
facility = kernel

; TODO -
message_syntax = %message%

; TODO -
ok severity = informational

; TODO -
severity = error

; TODO -
tag_syntax = NSCA

; TODO -
unknown severity = emergency

; TODO -
warning severity = warning


; Section for system checks and system settings
[/settings/system/windows]

; DEFAULT LENGTH - Used to define the default intervall for range buffer checks (ie. CPU).
default buffer length = 1h


; Confiure which services has to be in which state
[/settings/system/windows/service mapping]


; A list of avalible remote target systems
[/settings/targets]


; Section for simple file writer module (SimpleFileWriter.dll).
[/settings/writers/file]

; CHANNEL - The channel to listen to.
channel = FILE

; FILE TO WRITE TO - The filename to write output to.
file = output.txt

; PRIMARY CACHE INDEX - Set this to the value you want to use as unique key for the cache (host, command, result,...).
syntax = ${alias-or-command} ${result} ${message}


this is config file for the host:
Code: Select all
[root@vmnagios host]# cat w3vcs02.emslabw3.local.cfg
define host{
        use                     linux-server            ; Name of host template to use
                                                        ; This host definition will inherit all variables that are defined
                                                        ; in (or inherited by) the linux-server host template definition.
        host_name               w3vcs02
        alias                   w3vcs02
        address                 10.10.3.50
        }

# Define a service to check the disk space of the root partition
# on the local machine.  Warning if < 20% free, critical if
# < 10% free space on partition.

define service{
        use                             local-service         ; Name of service template to use
        host_name                       w3vcs02
        service_description             Disk
        check_command                   check_alias_disk
        }



# Define a service to check the number of currently logged in
# users on the local machine.  Warning if > 20 users, critical
# if > 50 users.

#define service{
#        use                             local-service         ; Name of service template to use
#        host_name                       w3vcs02
#        service_description             Current Users
#        check_command                   check_users!20!50
#        }


# Define a service to check the number of currently running procs
# on the local machine.  Warning if > 250 processes, critical if
# > 400 users.

define service{
        use                             local-service         ; Name of service template to use
        host_name                       w3vcs02
        service_description             vxpd.exe status
        check_command                   check_vmware_process
        }



# Define a service to check the load on the local machine.

#define service{
#        use                             local-service         ; Name of service template to use
#        host_name                       w3vcs02
#        service_description             Current Load
#        check_command                   check_local_load!5.0,4.0,3.0!10.0,6.0,4.0
#        }

#cpu on windows host
define service{
        use                             local-service         ; Name of service template to use
        host_name                       w3vcs02
        service_description             check_win_cpu
        check_command                   check_win_cpu
        }

#esx monitoring:

define service{
        use                             local-service         ; Name of service template to use
        host_name                       w3vcs02
        service_description             check_esx_disk
        check_command                   check_esx_disk!80!90
        }



define service{
        use                             local-service         ; Name of service template to use
        host_name                       w3vcs02
        service_description             check_esx_ram
        check_command                   check_esx_ram!80!90
        }



define service{
        use                             local-service         ; Name of service template to use
        host_name                       w3vcs02
        service_description             check_esx_swap
        check_command                   check_esx_swap!80!90
        }



define service{
        use                             local-service         ; Name of service template to use
        host_name                       w3vcs02
        service_description             check_esx_status
        check_command                   check_esx_status
        }



define service{
        use                             local-service         ; Name of service template to use
        host_name                       w3vcs02
        service_description             check_esx_nic
        check_command                   check_esx_nic
        }



define service{
        use                             local-service         ; Name of service template to use
        host_name                       w3vcs02
        service_description             check_esx_issues
        check_command                   check_esx_issues
        }

define service{
        use                             local-service         ; Name of service template to use
        host_name                       w3vcs02
        service_description             check_esx_net_usage
        check_command                   check_esx_net_usage
        }

define service{
        use                             local-service         ; Name of service template to use
        host_name                       w3vcs02
        service_description             check_esx_io
        check_command                   check_esx_io
        }

define service{
        use                             local-service         ; Name of service template to use
        host_name                       w3vcs02
        service_description             check_esx_hosts
        check_command                   check_esx_hosts
        }





All the other checks are working correctly.

Thanks
Rhobar
 
Posts: 41
Joined: Sat Mar 16, 2013 9:23 am
Location: Rome, Italy

Re: check_nrpe status information (null)

Postby lmiltchev » Thu May 11, 2017 11:23 am

These configs look good - I don't see any issues with them. However, I forgot to ask you about the "check_nrpe" command definition. It would be nice to see this one too. I wonder if you are passing "$HOSTADRESS$" or "-c" twice...

Your "check_win_cpu" command is defined as:
Code: Select all
define command{
        command_name    check_win_cpu
        command_line    $USER1$/check_nrpe -c alias_cpu -H $HOSTADRESS$
        }


so if, for example, you have check_nrpe command configured as this:
Code: Select all
define command {
       command_name                        check_nrpe
       command_line                        $USER1$/check_nrpe -H $HOSTADDRESS$ -t 30 -c $ARG1$ $ARG2$
}


then, you should change the "check_win_cpu" command to this:
Code: Select all
define command{
        command_name    check_win_cpu
        command_line    $USER1$/check_nrpe!alias_cpu
        }


Let us know if this helped.
Be sure to check out our Knowledgebase for helpful articles and solutions!
User avatar
lmiltchev
QA Manager
 
Posts: 9428
Joined: Mon May 23, 2011 12:15 pm

Re: check_nrpe status information (null)

Postby Rhobar » Fri May 12, 2017 3:41 am

Hi!

I never defined check_nrpe.

Thinking on lmiltchev said, i tried to modify my commands.cfg deleting "-H $HOSTADDRESS$" entry, I get error with parameteres.
I restablished "-H $HOSTADDRESS$" entry and now my check is working.

Probably before the delete i wrote it uncorrectly; I can't give other explanation.

thanks for your help :)
Rhobar
 
Posts: 41
Joined: Sat Mar 16, 2013 9:23 am
Location: Rome, Italy

Re: check_nrpe status information (null)

Postby tgriep » Fri May 12, 2017 11:00 am

Yes, there was a typo in your previous command for the $HOSTADDRESS$ option, it was missing one of the letter D in it.
If everything is working now, shall we close and lock the post as solved?
Be sure to check out our Knowledgebase for helpful articles and solutions!
User avatar
tgriep
Madmin
 
Posts: 5872
Joined: Thu Oct 30, 2014 9:02 am

Re: check_nrpe status information (null)

Postby Rhobar » Fri May 19, 2017 8:35 am

sure.

thanks for help
Rhobar
 
Posts: 41
Joined: Sat Mar 16, 2013 9:23 am
Location: Rome, Italy


Return to Nagios Core

Who is online

Users browsing this forum: DrNox, quattrone, Yahoo [Bot] and 32 guests