Nagios Support Forum

Code: Select all

[root@vmnagios plugins]# /usr/lib64/nagios/plugins/check_nrpe -H 10.10.3.50 -c alias_cpu
OK CPU Load ok.|'5m'=3%;80;90 '1m'=3%;80;90 '30s'=3%;80;90

Code: Select all

my command definition:
        define command{
        command_name    check_win_cpu
        command_line    $USER1$/check_nrpe -c alias_cpu -H $HOSTADRESS$
        }

the service defined on machine:
define service{
        use                             local-service         ; Name of service template to use
        host_name                       w3vcs02
        service_description             check_win_cpu
        check_command                   check_win_cpu
        }

ini file on machine:
; alias_cpu - Alias for alias_cpu. To configure this item add a section called: /settings/external scripts/alias/alias_cpu
alias_cpu = checkCPU warn=80 crit=90 time=5m time=1m time=30s

Code: Select all

# Local service definition template - This is NOT a real service, just a template!

define service{
        name                            local-service           ; The name of this service template
        use                             generic-service         ; Inherit default values from the generic-service definition
        max_check_attempts              4                       ; Re-check the service up to 4 times in order to determine its final (hard) state
        normal_check_interval           5                       ; Check the service every 5 minutes under normal conditions
        retry_check_interval            1                       ; Re-check the service every minute until a hard state can be determined
        register                        0                       ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL SERVICE, JUST A TEMPLATE!
        }

Code: Select all

# If you want to fill this file with all avalible options run the following command:
#   nscp settings --generate --add-defaults --load-all
# If you want to activate a module and bring in all its options use:
#   nscp settings --activate-module <MODULE NAME> --add-defaults
# For details run: nscp settings --help


; Undocumented section
[/modules]

; CheckDisk - CheckDisk can check various file and disk related things. The current version has commands to check Size of hard drives and directories.
CheckDisk = 1

; Event log Checker. - Check for errors and warnings in the event log. This is only supported through NRPE so if you plan to use only NSClient this wont help you at all.
CheckEventLog = 1

; Check External Scripts - A simple wrapper to run external scripts and batch files.
CheckExternalScripts = 1

; Helper function - Various helper function to extend other checks. This is also only supported through NRPE.
CheckHelpers = 1

; Event log Checker. - Check for errors and warnings in the event log. This is only supported through NRPE so if you plan to use only NSClient this wont help you at all.
CheckLogFile = enabled

; Check NSCP - Checkes the state of the agent
CheckNSCP = 1

; CheckSystem - Various system related checks, such as CPU load, process state, service state memory usage and PDH counters.
CheckSystem = 1

; CheckTaskSched - CheckTaskSched can check various file and disk related things. The current version has commands to check Size of hard drives and directories.
CheckTaskSched = 0

; CheckTaskSched2 - CheckTaskSched2 can check various file and disk related things. The current version has commands to check Size of hard drives and directories.
CheckTaskSched2 = 0

; CheckWMI - CheckWMI can check various file and disk related things. The current version has commands to check Size of hard drives and directories.
CheckWMI = 1

; DotnetPlugin - Plugin to load and manage plugins written in dot net.
DotnetPlugins = 0

; GraphiteClient - Graphite client
GraphiteClient = 0

; LUAScript - LUAScript...
LUAScript = 0

; NRDPClient - Passive check support over NRDP
NRDPClient = 0

; NRPE client - NRPE client 
NRPEClient = 0

; NRPE server - A simple server that listens for incoming NRPE connection and handles them.
NRPEServer = 1

; NSCAClient - Passive check support over NSCA.
NSCAClient = 1

; NSCA server (no encryption) - A simple server that listens for incoming NSCA connection and handles them.
NSCAServer = 0

; NSClient server - A simple server that listens for incoming NSClient (check_nt) connection and handles them. Although NRPE is the preferred method NSClient is fully supported and can be used for simplicity or for compatibility.
NSClientServer = 1

; SMTPClient - Passive check support via SMTP
SMTPClient = 0

; Scheduler - A scheduler which schedules checks at regular intervals
Scheduler = 0

; SimpleCache module - Caches results for later checking.
SimpleCache = 0

; SimpleFileWriter module - FileWriters results for later checking.
SimpleFileWriter = 0

; SyslogClient - Passive check support via Syslog
SyslogClient = 0


; Undocumented section
[/settings/default]

; ALLOWED CIPHERS - A better value is: ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH
allowed ciphers = ADH

; ALLOWED HOSTS - A comaseparated list of allowed hosts. You can use netmasks (/ syntax) or * to create ranges.
allowed hosts = 10.10.3.79

; CACHE ALLOWED HOSTS - If hostnames should be cached, improves speed and security somewhat but wont allow you to have dynamic IPs for your nagios server.
cache allowed hosts = true

; SSL CERTIFICATE - 
certificate = 

; INBOX - The default channel to post incoming messages on
inbox = inbox

; PASSWORD - Password used to authenticate againast server
password = 

; TIMEOUT - Timeout when reading packets on incoming sockets. If the data has not arrived within this time we will bail out.
timeout = 30

; ENABLE SSL ENCRYPTION - This option controls if SSL should be enabled.
use ssl = true

; VERIFY MODE - 
verify mode = none


; A list of aliases available. An alias is an internal command that has been "wrapped" (to add arguments). Be careful so you don't create loops (ie check_loop=check_a, check_a=check_loop)
[/settings/external scripts/alias]

; alias_cpu - Alias for alias_cpu. To configure this item add a section called: /settings/external scripts/alias/alias_cpu
alias_cpu = checkCPU warn=80 crit=90 time=5m time=1m time=30s

; alias_cpu_ex - Alias for alias_cpu_ex. To configure this item add a section called: /settings/external scripts/alias/alias_cpu_ex
alias_cpu_ex = checkCPU warn=$ARG1$ crit=$ARG2$ time=5m time=1m time=30s

; alias_disk - Alias for alias_disk. To configure this item add a section called: /settings/external scripts/alias/alias_disk
alias_disk = CheckDriveSize MinWarn=10% MinCrit=5% CheckAll FilterType=FIXED

; alias_disk_loose - Alias for alias_disk_loose. To configure this item add a section called: /settings/external scripts/alias/alias_disk_loose
alias_disk_loose = CheckDriveSize MinWarn=10% MinCrit=5% CheckAll FilterType=FIXED ignore-unreadable

; alias_event_log - Alias for alias_event_log. To configure this item add a section called: /settings/external scripts/alias/alias_event_log
alias_event_log = CheckEventLog file=application file=system MaxWarn=1 MaxCrit=1 "filter=generated gt -2d AND severity NOT IN ('success', 'informational') AND source != 'SideBySide'" truncate=800 unique descriptions "syntax=%severity%: %source%: %message% (%count%)"

; alias_file_age - Alias for alias_file_age. To configure this item add a section called: /settings/external scripts/alias/alias_file_age
alias_file_age = checkFile2 filter=out "file=$ARG1$" filter-written=>1d MaxWarn=1 MaxCrit=1 "syntax=%filename% %write%"

; alias_file_size - Alias for alias_file_size. To configure this item add a section called: /settings/external scripts/alias/alias_file_size
alias_file_size = CheckFiles "filter=size > $ARG2$" "path=$ARG1$" MaxWarn=1 MaxCrit=1 "syntax=%filename% %size%" max-dir-depth=10

; alias_mem - Alias for alias_mem. To configure this item add a section called: /settings/external scripts/alias/alias_mem
alias_mem = checkMem MaxWarn=80% MaxCrit=90% ShowAll=long type=physical type=virtual type=paged type=page

; alias_process - Alias for alias_process. To configure this item add a section called: /settings/external scripts/alias/alias_process
alias_process = checkProcState "$ARG1$=started"

; alias_process_count - Alias for alias_process_count. To configure this item add a section called: /settings/external scripts/alias/alias_process_count
alias_process_count = checkProcState MaxWarnCount=$ARG2$ MaxCritCount=$ARG3$ "$ARG1$=started"

; alias_process_hung - Alias for alias_process_hung. To configure this item add a section called: /settings/external scripts/alias/alias_process_hung
alias_process_hung = checkProcState MaxWarnCount=1 MaxCritCount=1 "$ARG1$=hung"

; alias_process_stopped - Alias for alias_process_stopped. To configure this item add a section called: /settings/external scripts/alias/alias_process_stopped
alias_process_stopped = checkProcState "$ARG1$=stopped"

; alias_sched_all - Alias for alias_sched_all. To configure this item add a section called: /settings/external scripts/alias/alias_sched_all
alias_sched_all = CheckTaskSched "filter=exit_code ne 0" "syntax=%title%: %exit_code%" warn=>0

; alias_sched_long - Alias for alias_sched_long. To configure this item add a section called: /settings/external scripts/alias/alias_sched_long
alias_sched_long = CheckTaskSched "filter=status = 'running' AND most_recent_run_time < -$ARG1$" "syntax=%title% (%most_recent_run_time%)" warn=>0

; alias_sched_task - Alias for alias_sched_task. To configure this item add a section called: /settings/external scripts/alias/alias_sched_task
alias_sched_task = CheckTaskSched "filter=title eq '$ARG1$' AND exit_code ne 0" "syntax=%title% (%most_recent_run_time%)" warn=>0

; alias_service - Alias for alias_service. To configure this item add a section called: /settings/external scripts/alias/alias_service
alias_service = checkServiceState CheckAll

; alias_service_ex - Alias for alias_service_ex. To configure this item add a section called: /settings/external scripts/alias/alias_service_ex
alias_service_ex = checkServiceState CheckAll "exclude=Net Driver HPZ12" "exclude=Pml Driver HPZ12" exclude=stisvc

; alias_up - Alias for alias_up. To configure this item add a section called: /settings/external scripts/alias/alias_up
alias_up = checkUpTime MinWarn=1d MinWarn=1h

; alias_updates - Alias for alias_updates. To configure this item add a section called: /settings/external scripts/alias/alias_updates
alias_updates = check_updates -warning 0 -critical 0

; alias_volumes - Alias for alias_volumes. To configure this item add a section called: /settings/external scripts/alias/alias_volumes
alias_volumes = CheckDriveSize MinWarn=10% MinCrit=5% CheckAll=volumes FilterType=FIXED

; alias_volumes_loose - Alias for alias_volumes_loose. To configure this item add a section called: /settings/external scripts/alias/alias_volumes_loose
alias_volumes_loose = CheckDriveSize MinWarn=10% MinCrit=5% CheckAll=volumes FilterType=FIXED ignore-unreadable

; default - Alias for default. To configure this item add a section called: /settings/external scripts/alias/default
default = 


; List all dot net modules loaded by the DotNetplugins module here
[/modules/dotnet]


; Section for SMTP passive check module.
[/settings/NRDP/client]

; CHANNEL - The channel to listen to.
channel = NRDP

; HOSTNAME - The host name of this host if set to blank (default) the windows name of the computer will be used.
hostname = auto


; Target definition for: default
[/settings/NRDP/client/targets/default]

; TARGET ADDRESS - Target host address
address = 

; RECIPIENT - Recipient of email message
recipient = nscp@localhost

; SENDER - Sender of email message
sender = nscp@localhost

; TEMPLATE - Template for message data
template = Hello, this is %source% reporting %message%!

; TIMEOUT - Timeout when reading/writing packets to/from sockets.
timeout = 30


; Section for NRPE active/passive check module.
[/settings/NRPE/client]

; CHANNEL - The channel to listen to.
channel = NRPE


; Target definition for: default
[/settings/NRPE/client/targets/default]

; TARGET ADDRESS - Target host address
address = 

; ALLOWED CIPHERS - A better value is: ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH
allowed ciphers = ADH

; SSL CERTIFICATE - 
certificate = 

; PAYLOAD LENGTH - Length of payload to/from the NRPE agent. This is a hard specific value so you have to "configure" (read recompile) your NRPE agent to use the same value for it to work.
payload length = 1024

; TIMEOUT - Timeout when reading/writing packets to/from sockets.
timeout = 30

; ENABLE SSL ENCRYPTION - This option controls if SSL should be enabled.
use ssl = true

; VERIFY MODE - 
verify mode = none


; Section for NRPE (NRPEServer.dll) (check_nrpe) protocol options.
[/settings/NRPE/server]

; COMMAND ARGUMENT PROCESSING - This option determines whether or not the we will allow clients to specify arguments to commands that are executed.
allow arguments = true

; COMMAND ALLOW NASTY META CHARS - This option determines whether or not the we will allow clients to specify nasty (as in |`&><'"\[]{}) characters in arguments.
allow nasty characters = false

; PORT NUMBER - Port to use for NRPE.
port = 5666


; Section for NSCA passive check module.
[/settings/NSCA/client]

; CHANNEL - The channel to listen to.
channel = NSCA

; HOSTNAME - The host name of this host if set to blank (default) the windows name of the computer will be used.
hostname = auto


; Target definition for: default
[/settings/NSCA/client/targets/default]

; TARGET ADDRESS - Target host address
address = 

; ALLOWED CIPHERS - A better value is: ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH
allowed ciphers = ADH

; SSL CERTIFICATE - 
certificate = 

; ENCRYPTION METHOD - Number corresponding to the various encryption algorithms (see the wiki). Has to be the same as the server or it wont work at all.
encryption = aes

; PASSWORD - The password to use. Again has to be the same as the server or it wont work at all.
password = 

; TIMEOUT - Timeout when reading/writing packets to/from sockets.
timeout = 30

; ENABLE SSL ENCRYPTION - This option controls if SSL should be enabled.
use ssl = false

; VERIFY MODE - 
verify mode = none


; Section for NSCA (NSCAServer) (check_nsca) protocol options.
[/settings/NSCA/server]

; ENCRYPTION - Encryption to use
encryption = aes

; PASSWORD - Password to use
password = 

; PAYLOAD LENGTH - Length of payload to/from the NSCA agent. This is a hard specific value so you have to "configure" (read recompile) your NSCA agent to use the same value for it to work.
payload length = 512

; PERFORMANCE DATA - Send performance data back to nagios (set this to 0 to remove all performance data).
performance data = true

; PORT NUMBER - Port to use for NSCA.
port = 5667

; ENABLE SSL ENCRYPTION - This option controls if SSL should be enabled.
use ssl = false


; Section for NSClient (NSClientServer.dll) (check_nt) protocol options.
[/settings/NSClient/server]

; PERFORMANCE DATA - Send performance data back to nagios (set this to 0 to remove all performance data).
performance data = true

; PORT NUMBER - Port to use for check_nt.
port = 12489


; Section for SMTP passive check module.
[/settings/SMTP/client]

; CHANNEL - The channel to listen to.
channel = SMTP


; Target definition for: default
[/settings/SMTP/client/targets/default]

; TARGET ADDRESS - Target host address
address = 

; RECIPIENT - Recipient of email message
recipient = nscp@localhost

; SENDER - Sender of email message
sender = nscp@localhost

; TEMPLATE - Template for message data
template = Hello, this is %source% reporting %message%!

; TIMEOUT - Timeout when reading/writing packets to/from sockets.
timeout = 30


; Section for simple cache module (SimpleCache.dll).
[/settings/cache]

; CHANNEL - The channel to listen to.
channel = CACHE

; PRIMARY CACHE INDEX - Set this to the value you want to use as unique key for the cache (host, command, result,...).
primary index = ${alias-or-command}


; Section for 
 checks and system settings
[/settings/check/task schedule]

; SYNTAX - Set this to use a specific syntax string for all commands (that don't specify one)
default buffer length = %title% last run: %most-recent-run-time% (%exit-code%)


; Configure crash handling properties.
[/settings/crash]

; ARCHIVE CRASHREPORTS - Archive crash reports in the archive folder
archive = true

; folder - The archive folder for crash dunpes.
archive folder = ${shared-path}/crash-dumps

; RESTART - Submit crash reports to nsclient.org (or your configured submission server)
restart = true

; RESTART SERVICE NAME - The url to submit crash reports to
restart target = NSClientpp

; SUBMIT CRASHREPORTS - Submit crash reports to nsclient.org (or your configured submission server)
submit = false

; SUBMISSION URL - The url to submit crash reports to
submit url = http://crash.nsclient.org/submit


; Section for the EventLog Checker (CheckEventLog.dll).
[/settings/eventlog]

; BUFFER_SIZE - The size of the buffer to use when getting messages this affects the speed and maximum size of messages you can recieve.
buffer size = 131072

; DEBUG - Log more information when filtering (usefull to detect issues with filters) not usefull in production as it is a bit of a resource hog.
debug = false

; LOOKUP NAMES - Lookup the names of eventlog files
lookup names = true

; SYNTAX - Set this to use a specific syntax string for all commands (that don't specify one).
syntax = 


; A set of options to configure the real time checks
[/settings/eventlog/real-time]

; DEBUG - Log missed records (usefull to detect issues with filters) not usefull in production as it is a bit of a resource hog.
debug = false

; REAL TIME CHECKING - Spawns a backgrounnd thread which detects issues and reports them back instantly.
enabled = false

; LOGS TO CHECK - Comma separated list of logs to check
log = application,system

; STARTUP AGE - The initial age to scan when starting NSClient++
startup age = 30m


; A set of filters to use in real-time mode
[/settings/eventlog/real-time/filters]


; Section for external scripts configuration options (CheckExternalScripts).
[/settings/external scripts]

; COMMAND ARGUMENT PROCESSING - This option determines whether or not the we will allow clients to specify arguments to commands that are executed.
allow arguments = false

; COMMAND ALLOW NASTY META CHARS - This option determines whether or not the we will allow clients to specify nasty (as in |`&><'"\[]{}) characters in arguments.
allow nasty characters = false

; SCRIPT DIRECTORY - Load all scripts in a directory and use them as commands. Probably dangerous but useful if you have loads of scripts :)
script path = 

; COMMAND TIMEOUT - The maximum time in seconds that a command can execute. (if more then this execution will be aborted). NOTICE this only affects external commands not internal ones.
timeout = 60


; A list of scripts available to run from the CheckExternalScripts module. Syntax is: <command>=<script> <arguments>
[/settings/external scripts/scripts]


; A list of wrappped scripts (ie. using the template mechanism)
[/settings/external scripts/wrapped scripts]


; A list of templates for wrapped scripts
[/settings/external scripts/wrappings]

; BATCH FILE WRAPPING - 
bat = scripts\\%SCRIPT% %ARGS%

; POWERSHELL WRAPPING - 
ps1 = cmd /c echo scripts\\%SCRIPT% %ARGS%; exit($lastexitcode) | powershell.exe -command -

; VISUAL BASIC WRAPPING - 
vbs = cscript.exe //T:30 //NoLogo scripts\\lib\\wrapper.vbs %SCRIPT% %ARGS%


; Section for graphite passive check module.
[/settings/graphite/client]

; CHANNEL - The channel to listen to.
channel = GRAPHITE

; HOSTNAME - The host name of this host if set to blank (default) the windows name of the computer will be used.
hostname = auto


; Target definition for: default
[/settings/graphite/client/targets/default]

; TARGET ADDRESS - Target host address
address = 

; PATH FOR VALUES - 
path = system.${hostname}.${check_alias}.${perf_alias}


; Section for configuring the log handling.
[/settings/log]

; DATEMASK - The size of the buffer to use when getting messages this affects the speed and maximum size of messages you can recieve.
date format = %Y-%m-%d %H:%M:%S

; FILENAME - The file to write log data to. Set this to none to disable log to file.
file name = ${exe-path}/nsclient.log

; LOG LEVEL - Log level to use. Avalible levels are error,warning,info,debug,trace
level = info


; Configure log file properties.
[/settings/log/file]

; MAXIMUM FILE SIZE - When file size reaches this it will be truncated to 50% if set to 0 (default) truncation will be disabled
max size = 0


; Section for log file checker
[/settings/logfile]

; DEBUG - Log more information to help diagnose errors and configuration problems.
debug = false

; SYNTAX - Set the default syntax to use
syntax = 


; A set of options to configure the real time checks
[/settings/logfile/real-time]
enabled = true

; REAL TIME CHECKING - Spawns a backgrounnd thread which waits for file changes.
enabled = false


; A set of filters to use in real-time mode
[/settings/logfile/real-time/checks]


; Section for the LUAScripts module.
[/settings/lua]


; A list of scripts available to run from the LuaSCript module.
[/settings/lua/scripts]


; Section for the Scheduler module.
[/settings/scheduler]

; THREAD COUNT - Number of threads to use.
threads = 5


; Section for the Scheduler module.
[/settings/scheduler/schedules]


; Section for configuring the shared session.
[/settings/shared session]

; LOG LEVEL - Log level to use
enabled = false


; Section for SYSLOG passive check module.
[/settings/syslog/client]

; CHANNEL - The channel to listen to.
channel = syslog

; HOSTNAME - The host name of this host if set to blank (default) the windows name of the computer will be used.
hostname = 


; Target definition for: default
[/settings/syslog/client/targets/default]

; TARGET ADDRESS - Target host address
address = 

; TODO - 
critical severity = critical

; TODO - 
facility = kernel

; TODO - 
message_syntax = %message%

; TODO - 
ok severity = informational

; TODO - 
severity = error

; TODO - 
tag_syntax = NSCA

; TODO - 
unknown severity = emergency

; TODO - 
warning severity = warning


; Section for system checks and system settings
[/settings/system/windows]

; DEFAULT LENGTH - Used to define the default intervall for range buffer checks (ie. CPU).
default buffer length = 1h


; Confiure which services has to be in which state
[/settings/system/windows/service mapping]


; A list of avalible remote target systems
[/settings/targets]


; Section for simple file writer module (SimpleFileWriter.dll).
[/settings/writers/file]

; CHANNEL - The channel to listen to.
channel = FILE

; FILE TO WRITE TO - The filename to write output to.
file = output.txt

; PRIMARY CACHE INDEX - Set this to the value you want to use as unique key for the cache (host, command, result,...).
syntax = ${alias-or-command} ${result} ${message}

Code: Select all

[root@vmnagios host]# cat w3vcs02.emslabw3.local.cfg
define host{
        use                     linux-server            ; Name of host template to use
                                                        ; This host definition will inherit all variables that are defined
                                                        ; in (or inherited by) the linux-server host template definition.
        host_name               w3vcs02
        alias                   w3vcs02
        address                 10.10.3.50
        }

# Define a service to check the disk space of the root partition
# on the local machine.  Warning if < 20% free, critical if
# < 10% free space on partition.

define service{
        use                             local-service         ; Name of service template to use
        host_name                       w3vcs02
        service_description             Disk
        check_command                   check_alias_disk
        }



# Define a service to check the number of currently logged in
# users on the local machine.  Warning if > 20 users, critical
# if > 50 users.

#define service{
#        use                             local-service         ; Name of service template to use
#        host_name                       w3vcs02
#        service_description             Current Users
#        check_command                   check_users!20!50
#        }


# Define a service to check the number of currently running procs
# on the local machine.  Warning if > 250 processes, critical if
# > 400 users.

define service{
        use                             local-service         ; Name of service template to use
        host_name                       w3vcs02
        service_description             vxpd.exe status
        check_command                   check_vmware_process
        }



# Define a service to check the load on the local machine.

#define service{
#        use                             local-service         ; Name of service template to use
#        host_name                       w3vcs02
#        service_description             Current Load
#        check_command                   check_local_load!5.0,4.0,3.0!10.0,6.0,4.0
#        }

#cpu on windows host
define service{
        use                             local-service         ; Name of service template to use
        host_name                       w3vcs02
        service_description             check_win_cpu
        check_command                   check_win_cpu
        }

#esx monitoring:

define service{
        use                             local-service         ; Name of service template to use
        host_name                       w3vcs02
        service_description             check_esx_disk
        check_command                   check_esx_disk!80!90
        }



define service{
        use                             local-service         ; Name of service template to use
        host_name                       w3vcs02
        service_description             check_esx_ram
        check_command                   check_esx_ram!80!90
        }



define service{
        use                             local-service         ; Name of service template to use
        host_name                       w3vcs02
        service_description             check_esx_swap
        check_command                   check_esx_swap!80!90
        }



define service{
        use                             local-service         ; Name of service template to use
        host_name                       w3vcs02
        service_description             check_esx_status
        check_command                   check_esx_status
        }



define service{
        use                             local-service         ; Name of service template to use
        host_name                       w3vcs02
        service_description             check_esx_nic
        check_command                   check_esx_nic
        }



define service{
        use                             local-service         ; Name of service template to use
        host_name                       w3vcs02
        service_description             check_esx_issues
        check_command                   check_esx_issues
        }

define service{
        use                             local-service         ; Name of service template to use
        host_name                       w3vcs02
        service_description             check_esx_net_usage
        check_command                   check_esx_net_usage
        }

define service{
        use                             local-service         ; Name of service template to use
        host_name                       w3vcs02
        service_description             check_esx_io
        check_command                   check_esx_io
        }

define service{
        use                             local-service         ; Name of service template to use
        host_name                       w3vcs02
        service_description             check_esx_hosts
        check_command                   check_esx_hosts
        }

Code: Select all

define command{
        command_name    check_win_cpu
        command_line    $USER1$/check_nrpe -c alias_cpu -H $HOSTADRESS$
        }

Code: Select all

define command {
       command_name                  		check_nrpe
       command_line                  		$USER1$/check_nrpe -H $HOSTADDRESS$ -t 30 -c $ARG1$ $ARG2$
}

Code: Select all

define command{
        command_name    check_win_cpu
        command_line    $USER1$/check_nrpe!alias_cpu
        }