Thanks @mcapra for the help.
You may also want to take a look at the following link for an explanation on the "No more variables left in this MIB View (It is past the end of the MIB tree)" message
https://stackoverflow.com/questions/146 ... mean-linux
In simple terms, it says that the device you are polling is not responding to that OID because it is not setup to respond to it or that the system doesn't have the OID available as it uses a different OID.
Issues with check_iostat
Re: Issues with check_iostat
Be sure to check out our Knowledgebase for helpful articles and solutions!
Re: Issues with check_iostat
Thank you both of you for your help.
I removed "-V systemonly " of this, as your link suggest @tgriep :
this command is now working :
and return this :
But I still have the same problem when I run my command, it doesn't find the disk.
Concerning Windows, I think yes I will give up, because I can not use NSClient++. Thank you for your help anyway
I removed "-V systemonly " of this, as your link suggest @tgriep :
Code: Select all
rocommunity public default -V systemonly
Code: Select all
snmpwalk -v1 X.X.X.X -c public 1.3.6.1.4.1.2021.13.15.1
Code: Select all
iso.3.6.1.4.1.2021.13.15.1.1.1.1 = INTEGER: 1
iso.3.6.1.4.1.2021.13.15.1.1.1.2 = INTEGER: 2
iso.3.6.1.4.1.2021.13.15.1.1.1.3 = INTEGER: 3
iso.3.6.1.4.1.2021.13.15.1.1.1.4 = INTEGER: 4
iso.3.6.1.4.1.2021.13.15.1.1.1.5 = INTEGER: 5
iso.3.6.1.4.1.2021.13.15.1.1.1.6 = INTEGER: 6
iso.3.6.1.4.1.2021.13.15.1.1.1.7 = INTEGER: 7
iso.3.6.1.4.1.2021.13.15.1.1.2.1 = STRING: "sdb"
iso.3.6.1.4.1.2021.13.15.1.1.2.2 = STRING: "sdb1"
iso.3.6.1.4.1.2021.13.15.1.1.2.3 = STRING: "sda"
iso.3.6.1.4.1.2021.13.15.1.1.2.4 = STRING: "sda1"
iso.3.6.1.4.1.2021.13.15.1.1.2.5 = STRING: "sda2"
iso.3.6.1.4.1.2021.13.15.1.1.2.6 = STRING: "sda5"
iso.3.6.1.4.1.2021.13.15.1.1.2.7 = STRING: "sr0"
iso.3.6.1.4.1.2021.13.15.1.1.3.1 = Counter32: 1892352
iso.3.6.1.4.1.2021.13.15.1.1.3.2 = Counter32: 868352
iso.3.6.1.4.1.2021.13.15.1.1.3.3 = Counter32: 308947968
iso.3.6.1.4.1.2021.13.15.1.1.3.4 = Counter32: 307016704
iso.3.6.1.4.1.2021.13.15.1.1.3.5 = Counter32: 6144
iso.3.6.1.4.1.2021.13.15.1.1.3.6 = Counter32: 987136
iso.3.6.1.4.1.2021.13.15.1.1.3.7 = Counter32: 0
iso.3.6.1.4.1.2021.13.15.1.1.4.1 = Counter32: 0
iso.3.6.1.4.1.2021.13.15.1.1.4.2 = Counter32: 0
iso.3.6.1.4.1.2021.13.15.1.1.4.3 = Counter32: 299184128
iso.3.6.1.4.1.2021.13.15.1.1.4.4 = Counter32: 299184128
iso.3.6.1.4.1.2021.13.15.1.1.4.5 = Counter32: 0
iso.3.6.1.4.1.2021.13.15.1.1.4.6 = Counter32: 0
iso.3.6.1.4.1.2021.13.15.1.1.4.7 = Counter32: 0
iso.3.6.1.4.1.2021.13.15.1.1.5.1 = Counter32: 239
iso.3.6.1.4.1.2021.13.15.1.1.5.2 = Counter32: 102
iso.3.6.1.4.1.2021.13.15.1.1.5.3 = Counter32: 8601
iso.3.6.1.4.1.2021.13.15.1.1.5.4 = Counter32: 8380
iso.3.6.1.4.1.2021.13.15.1.1.5.5 = Counter32: 2
iso.3.6.1.4.1.2021.13.15.1.1.5.6 = Counter32: 100
iso.3.6.1.4.1.2021.13.15.1.1.5.7 = Counter32: 0
iso.3.6.1.4.1.2021.13.15.1.1.6.1 = Counter32: 0
iso.3.6.1.4.1.2021.13.15.1.1.6.2 = Counter32: 0
iso.3.6.1.4.1.2021.13.15.1.1.6.3 = Counter32: 4011113
iso.3.6.1.4.1.2021.13.15.1.1.6.4 = Counter32: 4011113
iso.3.6.1.4.1.2021.13.15.1.1.6.5 = Counter32: 0
iso.3.6.1.4.1.2021.13.15.1.1.6.6 = Counter32: 0
iso.3.6.1.4.1.2021.13.15.1.1.6.7 = Counter32: 0
iso.3.6.1.4.1.2021.13.15.1.1.9.1 = INTEGER: 0
iso.3.6.1.4.1.2021.13.15.1.1.9.2 = INTEGER: 0
iso.3.6.1.4.1.2021.13.15.1.1.9.3 = INTEGER: 0
iso.3.6.1.4.1.2021.13.15.1.1.9.4 = INTEGER: 0
iso.3.6.1.4.1.2021.13.15.1.1.9.5 = INTEGER: 0
iso.3.6.1.4.1.2021.13.15.1.1.9.6 = INTEGER: 0
iso.3.6.1.4.1.2021.13.15.1.1.9.7 = INTEGER: 0
iso.3.6.1.4.1.2021.13.15.1.1.10.1 = INTEGER: 0
iso.3.6.1.4.1.2021.13.15.1.1.10.2 = INTEGER: 0
iso.3.6.1.4.1.2021.13.15.1.1.10.3 = INTEGER: 0
iso.3.6.1.4.1.2021.13.15.1.1.10.4 = INTEGER: 0
iso.3.6.1.4.1.2021.13.15.1.1.10.5 = INTEGER: 0
iso.3.6.1.4.1.2021.13.15.1.1.10.6 = INTEGER: 0
iso.3.6.1.4.1.2021.13.15.1.1.10.7 = INTEGER: 0
iso.3.6.1.4.1.2021.13.15.1.1.11.1 = INTEGER: 0
iso.3.6.1.4.1.2021.13.15.1.1.11.2 = INTEGER: 0
iso.3.6.1.4.1.2021.13.15.1.1.11.3 = INTEGER: 0
iso.3.6.1.4.1.2021.13.15.1.1.11.4 = INTEGER: 0
iso.3.6.1.4.1.2021.13.15.1.1.11.5 = INTEGER: 0
iso.3.6.1.4.1.2021.13.15.1.1.11.6 = INTEGER: 0
iso.3.6.1.4.1.2021.13.15.1.1.11.7 = INTEGER: 0
Concerning Windows, I think yes I will give up, because I can not use NSClient++. Thank you for your help anyway
Re: Issues with check_iostat
It is probably because the system only responds to SNMP version 1 so you would have to change the command to use that. Try this to see if that is true.
Code: Select all
/usr/local/nagios/libexec/check_diskio_ucd.pl -H X.X.X.X -C community -s 1 -d sdb1 -w 30 -c 50
Be sure to check out our Knowledgebase for helpful articles and solutions!
Re: Issues with check_iostat
And... It finnaly works ! Thank you for your help and your patience, I think you can close this threadtgriep wrote:It is probably because the system only responds to SNMP version 1 so you would have to change the command to use that. Try this to see if that is true.Code: Select all
/usr/local/nagios/libexec/check_diskio_ucd.pl -H X.X.X.X -C community -s 1 -d sdb1 -w 30 -c 50
Re: Issues with check_iostat
Closing topic as resolved.
Thank you for using the Nagios Support Forum.
Thank you for using the Nagios Support Forum.