How to configure WMI agent on existing nagios core 3.5.0
-
- Posts: 138
- Joined: Mon Nov 30, 2015 6:12 am
How to configure WMI agent on existing nagios core 3.5.0
Hello Experts,
Can anyone help me out to configure the WMI agent ( Agentless monitoring for windows machine) configuration on the existing Nagios server.
Version: Nagios core 3.5.0
OS version :Centos 6.5
I have gone through the link http://www.edcint.co.nz/checkwmiplus/ but there is no proper installation steps in detail and got lot of dependency error.
I am looking for detailed procedure to deploy the WMI configuration level and to monitor the windows machines through agentless in the existing nagios Monitoring dashboard.
Thanks in Advance.
Cheers
Simbu
Can anyone help me out to configure the WMI agent ( Agentless monitoring for windows machine) configuration on the existing Nagios server.
Version: Nagios core 3.5.0
OS version :Centos 6.5
I have gone through the link http://www.edcint.co.nz/checkwmiplus/ but there is no proper installation steps in detail and got lot of dependency error.
I am looking for detailed procedure to deploy the WMI configuration level and to monitor the windows machines through agentless in the existing nagios Monitoring dashboard.
Thanks in Advance.
Cheers
Simbu
Re: How to configure WMI agent on existing nagios core 3.5.0
For the Windows side of things, do everything on the first 11 pages of this documentation:
https://assets.nagios.com/downloads/nag ... ios-XI.pdf
I realize the documentation says Nagios XI, but the first few steps are just as valid with Nagios Core.
For check_wmi_plus, I do not know of any "step by step" procedure for setting this up beyond the official documentation written by the maintainer. Practically every solution is going to depend on the system on which you are installing check_wmi_plus. If you can share the package/dependency failures you encountered, specific advice can probably be offered.
https://assets.nagios.com/downloads/nag ... ios-XI.pdf
I realize the documentation says Nagios XI, but the first few steps are just as valid with Nagios Core.
For check_wmi_plus, I do not know of any "step by step" procedure for setting this up beyond the official documentation written by the maintainer. Practically every solution is going to depend on the system on which you are installing check_wmi_plus. If you can share the package/dependency failures you encountered, specific advice can probably be offered.
Former Nagios employee
https://www.mcapra.com/
https://www.mcapra.com/
-
- Former Nagios Staff
- Posts: 4583
- Joined: Wed Sep 21, 2016 10:29 am
- Location: NoLo, Minneapolis, MN
- Contact:
-
- Posts: 138
- Joined: Mon Nov 30, 2015 6:12 am
Re: How to configure WMI agent on existing nagios core 3.5.0
Hello mcapra,
Thanks for reply.
I have done changes on windows side as per the procedure provided in the link.
I followed the procedure for installing check_wmi plus and while doing testing I got the below error.
[root@nagios_test plugins]# ./check_wmi_plus.pl -m checkcpu -H <hostname> -u wmiagent -p XXXX
Can't locate Number/Format.pm in @INC (@INC contains: /usr/lib/nagios/plugins /usr/local/lib64/perl5 /usr/local/share/perl5 /usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5 .) at ./check_wmi_plus.pl line 52.
BEGIN failed--compilation aborted at ./check_wmi_plus.pl line 52.
Please help me out to clear the dependencies error.
Thanks in Advance.
Cheers,
Simbu
Thanks for reply.
I have done changes on windows side as per the procedure provided in the link.
I followed the procedure for installing check_wmi plus and while doing testing I got the below error.
[root@nagios_test plugins]# ./check_wmi_plus.pl -m checkcpu -H <hostname> -u wmiagent -p XXXX
Can't locate Number/Format.pm in @INC (@INC contains: /usr/lib/nagios/plugins /usr/local/lib64/perl5 /usr/local/share/perl5 /usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5 .) at ./check_wmi_plus.pl line 52.
BEGIN failed--compilation aborted at ./check_wmi_plus.pl line 52.
Please help me out to clear the dependencies error.
Thanks in Advance.
Cheers,
Simbu
-
- Support Tech
- Posts: 3457
- Joined: Mon May 15, 2017 5:00 pm
Re: How to configure WMI agent on existing nagios core 3.5.0
@rohithroki, You could probably install the missing module with:
Code: Select all
yum install perl-TimeDate
As of May 25th, 2018, all communications with Nagios Enterprises and its employees are covered under our new Privacy Policy.
-
- Posts: 138
- Joined: Mon Nov 30, 2015 6:12 am
Re: How to configure WMI agent on existing nagios core 3.5.0
Hello,
The package is already been installed
Package 1:perl-TimeDate-1.16-13.el6.noarch already installed and latest version
Nothing to do
but still I am getting the below error.
[root@nagios_test plugins]# ./check_wmi_plus.pl -m checkcpu -H <hostname> -u wmiagent -p <XXX>
Can't locate Number/Format.pm in @INC (@INC contains: /usr/lib/nagios/plugins /usr/local/lib64/perl5 /usr/local/share/perl5 /usr/lib64/perl5/vendor_perl /usr/sh are/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5 .) at ./check_wmi_plus.pl line 52.
BEGIN failed--compilation aborted at ./check_wmi_plus.pl line 52.
Please help me to solve.
Cheers,
Simbu
The package is already been installed
Package 1:perl-TimeDate-1.16-13.el6.noarch already installed and latest version
Nothing to do
but still I am getting the below error.
[root@nagios_test plugins]# ./check_wmi_plus.pl -m checkcpu -H <hostname> -u wmiagent -p <XXX>
Can't locate Number/Format.pm in @INC (@INC contains: /usr/lib/nagios/plugins /usr/local/lib64/perl5 /usr/local/share/perl5 /usr/lib64/perl5/vendor_perl /usr/sh are/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5 .) at ./check_wmi_plus.pl line 52.
BEGIN failed--compilation aborted at ./check_wmi_plus.pl line 52.
Please help me to solve.
Cheers,
Simbu
-
- Support Tech
- Posts: 3457
- Joined: Mon May 15, 2017 5:00 pm
Re: How to configure WMI agent on existing nagios core 3.5.0
@rohithroki, I'd like to see the list of all perl modules installed on your OS. Please run these commands:
That will create 2 test files: installed1.txt and installed2.txt that you can upload here.
Code: Select all
yum list installed | grep -i perl > installed1.txt
cpan -l > installed2.txt
As of May 25th, 2018, all communications with Nagios Enterprises and its employees are covered under our new Privacy Policy.
-
- Posts: 138
- Joined: Mon Nov 30, 2015 6:12 am
Re: How to configure WMI agent on existing nagios core 3.5.0
Hi npolovenko,
Thanks for the reply.
I have taken the files and uploaded
But I am unable to run the command.
[root@nagios_test ~]# cpan -l > installed2.txt
Unknown option: l
Nothing to install!
Cheers,
Simbu
Thanks for the reply.
I have taken the files and uploaded
But I am unable to run the command.
[root@nagios_test ~]# cpan -l > installed2.txt
Unknown option: l
Nothing to install!
Cheers,
Simbu
- Attachments
-
- installed1.txt
- (7.09 KiB) Downloaded 498 times
-
- Support Tech
- Posts: 3457
- Joined: Mon May 15, 2017 5:00 pm
Re: How to configure WMI agent on existing nagios core 3.5.0
@rohithroki, Please install this package:
Code: Select all
yum install perl-Scalar-List-Utils.x86_64
As of May 25th, 2018, all communications with Nagios Enterprises and its employees are covered under our new Privacy Policy.
-
- Posts: 138
- Joined: Mon Nov 30, 2015 6:12 am
Re: How to configure WMI agent on existing nagios core 3.5.0
Hi,
I'm getting the depending error while installing the package.
warning: perl-Scalar-List-Utils-1.27-248.el7.x86_64.rpm: Header V3 RSA/SHA256 Signature, key ID f4a80eb5: NOKEY
error: Failed dependencies:
perl(:MODULE_COMPAT_5.16.3) is needed by perl-Scalar-List-Utils-1.27-248.el7.x86_64
Please help me to fix the issue.
Cheers,
Simbu
I'm getting the depending error while installing the package.
warning: perl-Scalar-List-Utils-1.27-248.el7.x86_64.rpm: Header V3 RSA/SHA256 Signature, key ID f4a80eb5: NOKEY
error: Failed dependencies:
perl(:MODULE_COMPAT_5.16.3) is needed by perl-Scalar-List-Utils-1.27-248.el7.x86_64
Please help me to fix the issue.
Cheers,
Simbu