Long time for update option
Long time for update option
Hi, could you help me please.
When i tried change my option via web-interface, for example Active Checks. I need wait updating status of option long time.
How can i do it faster?
Thanks!
When i tried change my option via web-interface, for example Active Checks. I need wait updating status of option long time.
How can i do it faster?
Thanks!
Re: Long time for update option
You could pipe that command to the external commands file directly, but all that would save you is the page load time of the web GUI which *should* be negligible.
If you're using Nagios Core 3, I would highly recommend upgrading to Nagios Core 4 as there have been dramatic increases to performance across the board.
Can you share the output of the following commands executed from the CLI of your Nagios Core machine:
They will give us some insights into how this system is configured.
If you're using Nagios Core 3, I would highly recommend upgrading to Nagios Core 4 as there have been dramatic increases to performance across the board.
Can you share the output of the following commands executed from the CLI of your Nagios Core machine:
Code: Select all
/usr/local/nagios/bin/nagiostats
free -m
df -h
cat /proc/cpuinfo | grep processor
Former Nagios employee
https://www.mcapra.com/
https://www.mcapra.com/
Re: Long time for update option
Here you are please:
Code: Select all
Nagios Stats 4.3.1
Copyright (c) 2003-2008 Ethan Galstad (www.nagios.org)
Last Modified: 02-23-2017
License: GPL
CURRENT STATUS DATA
------------------------------------------------------
Status File: /usr/local/nagios/var/status.dat
Status File Age: 0d 0h 0m 33s
Status File Version: 4.3.1
Program Running Time: 0d 7h 32m 34s
Nagios PID: 9316
Total Services: 246
Services Checked: 243
Services Scheduled: 195
Services Actively Checked: 246
Services Passively Checked: 0
Total Service State Change: 0.000 / 0.000 / 0.000 %
Active Service Latency: 0.000 / 0.040 / 0.000 sec
Active Service Execution Time: 0.000 / 63.196 / 0.835 sec
Active Service State Change: 0.000 / 0.000 / 0.000 %
Active Services Last 1/5/15/60 min: 97 / 177 / 193 / 193
Passive Service Latency: 0.000 / 0.000 / 0.000 sec
Passive Service State Change: 0.000 / 0.000 / 0.000 %
Passive Services Last 1/5/15/60 min: 0 / 0 / 0 / 0
Services Ok/Warn/Unk/Crit: 234 / 0 / 0 / 12
Services Flapping: 0
Services In Downtime: 0
Total Hosts: 12
Hosts Checked: 12
Hosts Scheduled: 12
Hosts Actively Checked: 12
Host Passively Checked: 0
Total Host State Change: 0.000 / 0.000 / 0.000 %
Active Host Latency: 0.000 / 0.001 / 0.000 sec
Active Host Execution Time: 4.001 / 4.478 / 4.046 sec
Active Host State Change: 0.000 / 0.000 / 0.000 %
Active Hosts Last 1/5/15/60 min: 0 / 12 / 12 / 12
Passive Host Latency: 0.000 / 0.000 / 0.000 sec
Passive Host State Change: 0.000 / 0.000 / 0.000 %
Passive Hosts Last 1/5/15/60 min: 0 / 0 / 0 / 0
Hosts Up/Down/Unreach: 12 / 0 / 0
Hosts Flapping: 0
Hosts In Downtime: 0
Active Host Checks Last 1/5/15 min: 0 / 23 / 90
Scheduled: 0 / 12 / 54
On-demand: 0 / 11 / 36
Parallel: 0 / 12 / 54
Serial: 0 / 0 / 0
Cached: 0 / 11 / 36
Passive Host Checks Last 1/5/15 min: 0 / 0 / 0
Active Service Checks Last 1/5/15 min: 97 / 281 / 798
Scheduled: 97 / 281 / 798
On-demand: 0 / 0 / 0
Cached: 0 / 0 / 0
Passive Service Checks Last 1/5/15 min: 0 / 0 / 0
External Commands Last 1/5/15 min: 0 / 1 / 1
Code: Select all
free -m
total used free shared buff/cache available
Mem: 15576 11931 193 186 3451 3045
Swap: 8183 5355 2828
Code: Select all
df -h
Filesystem Size Used Avail Use% Mounted on
/dev/md2 1008G 352G 605G 37% /
devtmpfs 7.6G 0 7.6G 0% /dev
tmpfs 7.7G 4.0K 7.7G 1% /dev/shm
tmpfs 7.7G 785M 6.9G 11% /run
tmpfs 7.7G 0 7.7G 0% /sys/fs/cgroup
/dev/md1 488M 121M 342M 27% /boot
/dev/md3 1.7T 1.6T 71G 96% /home
tmpfs 1.6G 0 1.6G 0% /run/user/1000
tmpfs 1.6G 0 1.6G 0% /run/user/1003
Code: Select all
cat /proc/cpuinfo | grep processor
processor : 0
processor : 1
processor : 2
processor : 3
processor : 4
processor : 5
processor : 6
processor : 7
Re: Long time for update option
This machine is pretty well provisioned. How long is it taking to update a given setting once you change it via the GUI?
Former Nagios employee
https://www.mcapra.com/
https://www.mcapra.com/
Re: Long time for update option
It is can take 20 seconds.
Re: Long time for update option
The refresh_rate(default 90) can be set in /usr/local/nagios/etc/cgi.cfg. Restart the nagios service after any changes:
service nagios restart
service nagios restart
As of May 25th, 2018, all communications with Nagios Enterprises and its employees are covered under our new Privacy Policy.
Re: Long time for update option
If i set 5 sec it will be normal?
Re: Long time for update option
You can lower it as you see fit but keep in mind that this may increase load on the machine which may be impactful depending the system. I would suggest keeping it at the default honestly or lowering it a bit at time until you find a happy medium.
As of May 25th, 2018, all communications with Nagios Enterprises and its employees are covered under our new Privacy Policy.
Re: Long time for update option
Hi,
Sorry it did not help me, may be it has one more way to fix it?
Thanks!
Sorry it did not help me, may be it has one more way to fix it?
Thanks!
Re: Long time for update option
Can you clarify what you mean when you say it hasn't helped? How far did you lower the value? Did you restart the service after making the change? Does it still take 20 seconds to update?
As of May 25th, 2018, all communications with Nagios Enterprises and its employees are covered under our new Privacy Policy.