/var/log/messages has been replaced by syslog (so I found), and here are the lines you asked. I've obfuscated IP's and
mail addresses.
Feb 7 09:44:43 nagios postfix/cleanup[45107]: 6B73215F723: message-id=<20190207094443.6B73215F723@nagios.#######.###.##>
Feb 7 09:44:43 nagios postfix/qmgr[1029]: 6B73215F723: from=<###@#####.#######.###.##>, size=630, nrcpt=1 (queue active)
Feb 7 09:44:45 nagios postfix/smtp[45123]: 60B6A15F71E: to=<####.#####@#######.###.##>, relay=relay.#######.###.##[###.###.###.###]:25, delay=1.6, delays=0.01/0/0.02/1.6, dsn=2.6.0, status=sent (250 2.6.0 <20190207094443.60B6A15F71E@nagios.#######.###.##> [InternalId=156751] Queued mail for delivery)
Feb 7 09:44:45 nagios postfix/qmgr[1029]: 60B6A15F71E: removed
Feb 7 09:44:46 nagios postfix/smtp[45114]: 63FF515F71D: to=<#####.#######@#######.###.##>, relay=relay.#######.###.##[###.###.###.###]:25, delay=2.6, delays=0.01/0/0.03/2.6, dsn=2.6.0, status=sent (250 2.6.0 <20190207094443.63FF515F71D@nagios.#######.###.##> [InternalId=156752] Queued mail for delivery)
Feb 7 09:44:46 nagios postfix/qmgr[1029]: 63FF515F71D: removed
Feb 7 09:44:46 nagios postfix/smtp[45124]: 6888915F720: to=<######.#####@#######.###.##>, relay=relay.#######.###.##[###.###.###.###]:25, delay=3.4, delays=0.02/0/0.02/3.4, dsn=2.6.0, status=sent (250 2.6.0 <20190207094443.6888915F720@nagios.#######.###.##> [InternalId=156753] Queued mail for delivery)
Feb 7 09:44:46 nagios postfix/qmgr[1029]: 6888915F720: removed
Feb 7 09:44:47 nagios postfix/smtp[45132]: 69E4E15F725: to=<######.########@#######.###.##>, relay=relay.#######.###.##[###.###.###.###]:25, delay=4.5, delays=0.03/1.6/0.02/2.9, dsn=2.6.0, status=sent (250 2.6.0 <20190207094443.69E4E15F725@nagios.#######.###.##> [InternalId=156754] Queued mail for delivery)
Feb 7 09:44:47 nagios postfix/qmgr[1029]: 69E4E15F725: removed
Feb 7 09:44:49 nagios postfix/smtp[45123]: 6B73215F723: to=<###.######@#######.###.##>, relay=relay.#######.###.##[###.###.###.###]:25, delay=5.6, delays=0.03/1.6/0.03/4, dsn=2.6.0, status=sent (250 2.6.0 <20190207094443.6B73215F723@nagios.#######.###.##> [InternalId=156755] Queued mail for delivery)
Feb 7 09:44:49 nagios postfix/qmgr[1029]: 6B73215F723: removed
Feb 7 09:44:59 nagios postfix/smtp[45125]: 6664E15F71F: to=<######.##########@#######.###.##>, relay=relay.#######.###.##[###.###.###.###]:25, delay=16, delays=0.02/0/0.02/16, dsn=2.6.0, status=sent (250 2.6.0 <20190207094443.6664E15F71F@nagios.#######.###.##> [InternalId=30418420] Queued mail for delivery)
Feb 7 09:44:59 nagios postfix/qmgr[1029]: 6664E15F71F: removed
Feb 7 09:45:00 nagios postfix/smtp[45109]: 6245115F511: to=<#########.#########@#######.###.##>, relay=relay.#######.###.##[###.###.###.###]:25, delay=17, delays=0.02/0/0.02/17, dsn=2.6.0, status=sent (250 2.6.0 <20190207094443.6245115F511@nagios.#######.###.##> [InternalId=30418419] Queued mail for delivery)
Feb 7 09:45:00 nagios postfix/qmgr[1029]: 6245115F511: removed
Feb 7 09:45:01 nagios CRON[45238]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Feb 7 09:46:06 nagios nagios: SERVICE ALERT: ####;eventlog;WARNING;SOFT;1;AutoEnrollment(64): Err=0 Warn=1 Instances=1
Feb 7 09:47:25 nagios systemd-timesyncd[485]: Timed out waiting for reply from 91.189.94.4:123 (ntp.ubuntu.com).
Feb 7 09:47:36 nagios systemd-timesyncd[485]: Timed out waiting for reply from 91.189.89.198:123 (ntp.ubuntu.com).
[ 0.000000] Linux version 4.15.0-45-generic (buildd@lgw01-amd64-031) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #48-Ubuntu SMP Tue Jan 29 16:28:13 UTC 2019 (Ubuntu 4.15.0-45.48-generic 4.15.18)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.15.0-45-generic root=/dev/mapper/nagios--vg-root ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: xstate_offset[5]: 960, xstate_sizes[5]: 64
[ 0.000000] x86/fpu: xstate_offset[6]: 1024, xstate_sizes[6]: 512
[ 0.000000] x86/fpu: xstate_offset[7]: 1536, xstate_sizes[7]: 1024
[ 0.000000] x86/fpu: Enabled xstate features 0xff, context size is 2560 bytes, using 'compacted' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffeffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007fff0000-0x000000007fffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007ffff000-0x000000007fffffff] ACPI NVS
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS 090006 04/28/2016
[ 0.000000] Hypervisor detected: Microsoft Hyper-V
[ 0.000000] Hyper-V: features 0x2e7f, hints 0xc2c
[ 0.000000] Hyper-V Host Build:14393-10.0-2-0.2636
[ 0.000000] Hyper-V: LAPIC Timer Frequency: 0xc3500
[ 0.000000] tsc: Marking TSC unstable due to running on Hyper-V
[ 0.000000] Hyper-V: Using ext hypercall for remote TLB flush
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7fff0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00000000000 mask FFF00000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ (ptrval)]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x4993f000, 0x4993ffff] PGTABLE
[ 0.000000] BRK [0x49940000, 0x49940fff] PGTABLE
[ 0.000000] BRK [0x49941000, 0x49941fff] PGTABLE
[ 0.000000] BRK [0x49942000, 0x49942fff] PGTABLE
[ 0.000000] BRK [0x49943000, 0x49943fff] PGTABLE
[ 0.000000] BRK [0x49944000, 0x49944fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x31981000-0x34cb7fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F56F0 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 0x000000007FFF0000 000040 (v01 VRTUAL MICROSFT 04001628 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x000000007FFF0200 000081 (v02 VRTUAL MICROSFT 04001628 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x000000007FFF1724 0033BE (v01 MSFTVM MSFTVM02 00000002 INTL 02002026)
[ 0.000000] ACPI: FACS 0x000000007FFFF000 000040
[ 0.000000] ACPI: WAET 0x000000007FFF1480 000028 (v01 VRTUAL MICROSFT 04001628 MSFT 00000097)
[ 0.000000] ACPI: SLIC 0x000000007FFF14C0 000176 (v01 VRTUAL MICROSFT 04001628 MSFT 00000097)
[ 0.000000] ACPI: OEM0 0x000000007FFF16C0 000064 (v01 VRTUAL MICROSFT 04001628 MSFT 00000097)
[ 0.000000] ACPI: SRAT 0x000000007FFF0600 0000F0 (v02 VRTUAL MICROSFT 00000001 MSFT 00000001)
[ 0.000000] ACPI: APIC 0x000000007FFF0300 000252 (v01 VRTUAL MICROSFT 04001628 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x000000007FFFF040 000064 (v01 VRTUAL MICROSFT 04001628 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff] hotplug
[ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x80200000-0xf7ffffff] hotplug
[ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0xfdfffffff] hotplug
[ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x1000000000-0xffffffffff] hotplug
[ 0.000000] NODE_DATA(0) allocated [mem 0x7ffc5000-0x7ffeffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x000000007ffeffff]
[ 0.000000] Normal empty
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007ffeffff]
[ 0.000000] Reserved but unavailable: 114 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffeffff]
[ 0.000000] On node 0 totalpages: 524174
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8128 pages used for memmap
[ 0.000000] DMA32 zone: 520176 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 64 CPUs, 62 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] e820: [mem 0x80000000-0xffffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:64 nr_cpu_ids:64 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[ 0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
[ 0.000000] pcpu-alloc: [0] 32 33 34 35 36 37 38 39 [0] 40 41 42 43 44 45 46 47
[ 0.000000] pcpu-alloc: [0] 48 49 50 51 52 53 54 55 [0] 56 57 58 59 60 61 62 63
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 515961
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.15.0-45-generic root=/dev/mapper/nagios--vg-root ro
[ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 258048 bytes
[ 0.000000] log_buf_len min size: 262144 bytes
[ 0.000000] log_buf_len: 524288 bytes
[ 0.000000] early log buf free: 253176(96%)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1904960K/2096696K available (12300K kernel code, 2473K rwdata, 4252K rodata, 2408K init, 2416K bss, 191736K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=64, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 39194 entries in 154 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=64.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=64
[ 0.000000] NR_IRQS: 524544, nr_irqs: 936, preallocated irqs: 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] Switched APIC routing to physical flat.
[ 0.000000] clocksource: hyperv_clocksource_tsc_page: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
[ 0.028000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.032000] tsc: Detected 3192.498 MHz processor
[ 0.032000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6384.99 BogoMIPS (lpj=12769992)
[ 0.032000] pid_max: default: 65536 minimum: 512
[ 0.032000] Security Framework initialized
[ 0.032000] Yama: becoming mindful.
[ 0.032000] AppArmor: AppArmor initialized
[ 0.032000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.032000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.032000] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.032000] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.032000] mce: CPU supports 1 MCE banks
[ 0.032000] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.032000] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.032000] Spectre V2 : Mitigation: Full generic retpoline
[ 0.032000] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.032000] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[ 0.032000] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.032000] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.032000] Freeing SMP alternatives memory: 36K
[ 0.032000] smpboot: CPU0: Intel(R) Xeon(R) Gold 6134 CPU @ 3.20GHz (family: 0x6, model: 0x55, stepping: 0x4)
[ 0.032000] Performance Events: unsupported p6 CPU model 85 no PMU driver, software events only.
[ 0.032000] Hierarchical SRCU implementation.
[ 0.032000] NMI watchdog: Perf event create on CPU 0 failed with -2
[ 0.032000] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.032000] smp: Bringing up secondary CPUs ...
[ 0.032000] x86: Booting SMP configuration:
[ 0.032000] .... node #0, CPUs: #1
[ 0.032035] smp: Brought up 1 node, 2 CPUs
[ 0.032035] smpboot: Max logical packages: 32
[ 0.032035] smpboot: Total of 2 processors activated (12769.99 BogoMIPS)
[ 0.032383] devtmpfs: initialized
[ 0.032383] x86/mm: Memory block size: 128MB
[ 0.032383] evm: security.selinux
[ 0.032383] evm: security.SMACK64
[ 0.032383] evm: security.SMACK64EXEC
[ 0.032383] evm: security.SMACK64TRANSMUTE
[ 0.032383] evm: security.SMACK64MMAP
[ 0.032383] evm: security.apparmor
[ 0.032383] evm: security.ima
[ 0.032383] evm: security.capability
[ 0.032383] PM: Registering ACPI NVS region [mem 0x7ffff000-0x7fffffff] (4096 bytes)
[ 0.032383] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.032383] futex hash table entries: 16384 (order: 8, 1048576 bytes)
[ 0.036188] pinctrl core: initialized pinctrl subsystem
[ 0.036867] RTC time: 11:17:36, date: 02/03/19
[ 0.037073] NET: Registered protocol family 16
[ 0.037140] audit: initializing netlink subsys (disabled)
[ 0.037177] audit: type=2000 audit(1549192656.036:1): state=initialized audit_enabled=0 res=1
[ 0.037177] cpuidle: using governor ladder
[ 0.037177] cpuidle: using governor menu
[ 0.037177] ACPI: bus type PCI registered
[ 0.037177] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.037177] PCI: Using configuration type 1 for base access
[ 0.037177] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.037177] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.040166] ACPI: Added _OSI(Module Device)
[ 0.040169] ACPI: Added _OSI(Processor Device)
[ 0.040170] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.040172] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.040174] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.040176] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.040178] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.044664] ACPI: Interpreter enabled
[ 0.044674] ACPI: (supports S0 S5)
[ 0.044676] ACPI: Using IOAPIC for interrupt routing
[ 0.044693] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.044870] ACPI: Enabled 1 GPEs in block 00 to 0F
[ 0.057667] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.057672] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.057676] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.057683] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.057823] PCI host bridge to bus 0000:00
[ 0.057826] pci_bus 0000:00: root bus resource [mem 0xfe0000000-0xfffffffff window]
[ 0.057829] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.057830] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.057832] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.057834] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfffbffff window]
[ 0.057837] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.058001] pci 0000:00:00.0: [8086:7192] type 00 class 0x060000
[ 0.060043] pci 0000:00:07.0: [8086:7110] type 00 class 0x060100
[ 0.062422] pci 0000:00:07.1: [8086:7111] type 00 class 0x010180
[ 0.064662] pci 0000:00:07.1: reg 0x20: [io 0xffa0-0xffaf]
[ 0.065545] pci 0000:00:07.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.065548] pci 0000:00:07.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.065550] pci 0000:00:07.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.065551] pci 0000:00:07.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.066099] pci 0000:00:07.3: [8086:7113] type 00 class 0x068000
[ 0.066141] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
[ 0.068728] pci 0000:00:07.3: quirk: [io 0x0400-0x043f] claimed by PIIX4 ACPI
[ 0.069652] pci 0000:00:08.0: [1414:5353] type 00 class 0x030000
[ 0.070746] pci 0000:00:08.0: reg 0x10: [mem 0xf8000000-0xfbffffff]
[ 0.080756] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.080985] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.081214] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.081442] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.081931] SCSI subsystem initialized
[ 0.082005] libata version 3.00 loaded.
[ 0.082005] pci 0000:00:08.0: vgaarb: setting as boot VGA device
[ 0.082005] pci 0000:00:08.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.082005] pci 0000:00:08.0: vgaarb: bridge control possible
[ 0.082005] vgaarb: loaded
[ 0.082005] ACPI: bus type USB registered
[ 0.082005] usbcore: registered new interface driver usbfs
[ 0.082005] usbcore: registered new interface driver hub
[ 0.082005] usbcore: registered new device driver usb
[ 0.082005] EDAC MC: Ver: 3.0.0
[ 0.082005] PCI: Using ACPI for IRQ routing
[ 0.082005] PCI: pci_cache_line_size set to 64 bytes
[ 0.082005] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.082005] e820: reserve RAM buffer [mem 0x7fff0000-0x7fffffff]
[ 0.082005] NetLabel: Initializing
[ 0.082005] NetLabel: domain hash size = 128
[ 0.082005] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.082005] NetLabel: unlabeled traffic allowed by default
[ 0.084178] clocksource: Switched to clocksource hyperv_clocksource_tsc_page
[ 0.092387] VFS: Disk quotas dquot_6.6.0
[ 0.092464] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.092634] AppArmor: AppArmor Filesystem Enabled
[ 0.092651] pnp: PnP ACPI init
[ 0.092705] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.092748] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.092792] pnp 00:02: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.093525] pnp 00:03: [dma 0 disabled]
[ 0.093547] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.094275] pnp 00:04: [dma 0 disabled]
[ 0.094296] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.095055] pnp 00:05: [dma 2]
[ 0.095084] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.095115] system 00:06: [io 0x01e0-0x01ef] has been reserved
[ 0.095118] system 00:06: [io 0x0160-0x016f] has been reserved
[ 0.095120] system 00:06: [io 0x0278-0x027f] has been reserved
[ 0.095122] system 00:06: [io 0x0378-0x037f] has been reserved
[ 0.095124] system 00:06: [io 0x0678-0x067f] has been reserved
[ 0.095126] system 00:06: [io 0x0778-0x077f] has been reserved
[ 0.095128] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.095132] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.095257] system 00:07: [io 0x0400-0x043f] has been reserved
[ 0.095260] system 00:07: [io 0x0370-0x0371] has been reserved
[ 0.095261] system 00:07: [io 0x0440-0x044f] has been reserved
[ 0.095264] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.095266] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.095269] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.095358] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.095360] system 00:08: [mem 0x000c0000-0x000dffff] could not be reserved
[ 0.095362] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.095364] system 00:08: [mem 0x00100000-0xf7ffffff] could not be reserved
[ 0.095366] system 00:08: [mem 0xfffc0000-0xffffffff] has been reserved
[ 0.095369] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.095628] pnp: PnP ACPI: found 9 devices
[ 0.104351] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.104361] pci_bus 0000:00: resource 4 [mem 0xfe0000000-0xfffffffff window]
[ 0.104362] pci_bus 0000:00: resource 5 [io 0x0000-0x0cf7 window]
[ 0.104363] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff window]
[ 0.104364] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff window]
[ 0.104365] pci_bus 0000:00: resource 8 [mem 0xf8000000-0xfffbffff window]
[ 0.104433] NET: Registered protocol family 2
[ 0.104730] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.104759] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.104797] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.104916] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.104924] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.105066] NET: Registered protocol family 1
[ 0.105074] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.105602] pci 0000:00:08.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.105657] PCI: CLS 0 bytes, default 64
[ 0.105687] Unpacking initramfs...
[ 0.651977] Freeing initrd memory: 52444K
[ 0.652024] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.652027] software IO TLB [mem 0x78600000-0x7c600000] (64MB) mapped at [ (ptrval)- (ptrval)]
[ 0.652165] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e049b08001, max_idle_ns: 440795202126 ns
[ 0.652199] Scanning for low memory corruption every 60 seconds
[ 0.653143] Initialise system trusted keyrings
[ 0.653154] Key type blacklist registered
[ 0.653209] workingset: timestamp_bits=36 max_order=19 bucket_order=0
[ 0.653919] zbud: loaded
[ 0.654445] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.654647] fuse init (API version 7.26)
[ 0.656889] Key type asymmetric registered
[ 0.656893] Asymmetric key parser 'x509' registered
[ 0.656931] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.657039] io scheduler noop registered
[ 0.657040] io scheduler deadline registered
[ 0.657064] io scheduler cfq registered (default)
[ 0.657211] vesafb: mode is 800x600x32, linelength=3200, pages=0
[ 0.657213] vesafb: scrolling: redraw
[ 0.657215] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.657224] vesafb: framebuffer at 0xf8000000, mapped to 0x (ptrval), using 1920k, total 1920k
[ 0.657953] Console: switching to colour frame buffer device 100x37
[ 0.658563] fb0: VESA VGA frame buffer device
[ 0.658591] intel_idle: Please enable MWAIT in BIOS SETUP
[ 0.658654] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.658749] ACPI: Power Button [PWRF]
[ 0.659251] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.767087] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.864526] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.867548] Linux agpgart interface v0.103
[ 0.871841] loop: module loaded
[ 0.871946] ata_piix 0000:00:07.1: version 2.13
[ 0.872231] ata_piix 0000:00:07.1: Hyper-V Virtual Machine detected, ATA device ignore set
[ 0.875922] scsi host0: ata_piix
[ 0.876120] scsi host1: ata_piix
[ 0.876153] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.876624] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.877129] libphy: Fixed MDIO Bus: probed
[ 0.877546] tun: Universal TUN/TAP device driver, 1.6
[ 0.880065] PPP generic driver version 2.4.2
[ 0.880496] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.880901] ehci-pci: EHCI PCI platform driver
[ 0.881313] ehci-platform: EHCI generic platform driver
[ 0.881720] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.882123] ohci-pci: OHCI PCI platform driver
[ 0.882533] ohci-platform: OHCI generic platform driver
[ 0.882933] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.883379] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.893204] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.893550] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.893913] mousedev: PS/2 mouse device common for all mice
[ 0.894614] rtc_cmos 00:00: RTC can wake from S4
[ 0.896356] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 0.898051] rtc_cmos 00:00: alarms up to one month, 114 bytes nvram
[ 0.898370] i2c /dev entries driver
[ 0.898679] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0
[ 0.899057] device-mapper: uevent: version 1.0.3
[ 0.899432] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised:
dm-devel@redhat.com
[ 0.899876] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.901140] NET: Registered protocol family 10
[ 0.908594] Segment Routing with IPv6
[ 0.909653] NET: Registered protocol family 17
[ 0.910983] Key type dns_resolver registered
[ 0.912249] RAS: Correctable Errors collector initialized.
[ 0.913372] registered taskstats version 1
[ 0.914314] Loading compiled-in X.509 certificates
[ 0.918806] Loaded X.509 cert 'Build time autogenerated kernel key: e3b8f44ffaaceef3e3a84cfaebd8e5a9acebeaad'
[ 0.920438] zswap: loaded using pool lzo/zbud
[ 0.925805] Key type big_key registered
[ 0.926336] Key type trusted registered
[ 0.929327] Key type encrypted registered
[ 0.929803] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.930224] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 0.930648] ima: Allocated hash algorithm: sha1
[ 0.931092] evm: HMAC attrs: 0x1
[ 0.932043] Magic number: 7:85:276
[ 0.932487] tty tty13: hash matches
[ 0.933554] rtc_cmos 00:00: setting system clock to 2019-02-03 11:17:37 UTC (1549192657)
[ 0.934102] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.934523] EDD information not available.
[ 0.943215] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.404813] ata1.01: NODEV after polling detection
[ 1.524293] ata2.01: NODEV after polling detection
[ 1.596098] ata1.00: host indicates ignore ATA devices, ignored
[ 1.596808] ata2.00: ATAPI: Virtual CD, , max MWDMA2
[ 1.599316] ata2.00: configured for MWDMA2
[ 1.603053] scsi 1:0:0:0: CD-ROM Msft Virtual CD/ROM 1.0 PQ: 0 ANSI: 5
[ 1.635617] sr 1:0:0:0: [sr0] scsi3-mmc drive: 0x/0x tray
[ 1.636655] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.638726] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.638821] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 1.643846] Freeing unused kernel memory: 2408K
[ 1.660042] Write protecting the kernel read-only data: 20480k
[ 1.661799] Freeing unused kernel memory: 2008K
[ 1.666949] Freeing unused kernel memory: 1892K
[ 1.674790] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.675190] x86/mm: Checking user space page tables
[ 1.679380] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.750217] piix4_smbus 0000:00:07.3: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
[ 1.762295] Floppy drive(s): fd0 is 1.44M
[ 1.775774] hv_vmbus: Vmbus version:4.0
[ 1.789401] hv_vmbus: registering driver hyperv_keyboard
[ 1.789891] pps_core: LinuxPPS API ver. 1 registered
[ 1.790258] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <
giometti@linux.it>
[ 1.791479] FDC 0 is an 82078.
[ 1.794513] hv_vmbus: registering driver hv_storvsc
[ 1.795337] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.795801] PTP clock support registered
[ 1.797652] hv_vmbus: registering driver hid_hyperv
[ 1.798488] hv_utils: Registering HyperV Utility Driver
[ 1.798820] hv_vmbus: registering driver hv_util
[ 1.800189] hv_vmbus: registering driver hv_netvsc
[ 1.808047] scsi host2: storvsc_host_t
[ 1.809164] scsi 2:0:0:0: Direct-Access Msft Virtual Disk 1.0 PQ: 0 ANSI: 5
[ 1.810944] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.815071] sd 2:0:0:0: [sda] 83886080 512-byte logical blocks: (42.9 GB/40.0 GiB)
[ 1.815122] scsi host3: storvsc_host_t
[ 1.815875] sd 2:0:0:0: [sda] 4096-byte physical blocks
[ 1.816400] sd 2:0:0:0: [sda] Write Protect is off
[ 1.817018] sd 2:0:0:0: [sda] Mode Sense: 0f 00 00 00
[ 1.817462] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.817916] input: Microsoft Vmbus HID-compliant Mouse as /devices/0006:045E:0621.0001/input/input4
[ 1.820090] hid 0006:045E:0621.0001: input: <UNKNOWN> HID v0.01 Mouse [Microsoft Vmbus HID-compliant Mouse] on
[ 1.821700] hv_utils: FCopy IC version 1.1
[ 1.822182] hv_utils: Heartbeat IC version 3.0
[ 1.831231] sda: sda1 sda2 < sda5 >
[ 1.834069] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.836018] random: fast init done
[ 1.845800] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.846262] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.846730] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.849453] hv_utils: Shutdown IC version 3.0
[ 1.850868] hv_utils: TimeSync IC version 4.0
[ 1.851861] hv_utils: VSS IC version 5.0
[ 2.188036] psmouse serio1: trackpoint: failed to get extended button data, assuming 3 buttons
[ 2.401151] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 2.893229] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.912542] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 2.915499] systemd[1]: Detected virtualization microsoft.
[ 2.916547] systemd[1]: Detected architecture x86-64.
[ 2.942372] systemd[1]: Set hostname to <nagios>.
[ 3.209526] systemd-sysv-generator[275]: Overwriting existing symlink /run/systemd/generator.late/nagios.service with real service.
[ 3.691708] systemd[1]: Created slice User and Session Slice.
[ 3.694633] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.698702] systemd[1]: Created slice System Slice.
[ 3.700197] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 3.701570] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.702991] systemd[1]: Created slice system-postfix.slice.
[ 3.840462] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 3.958098] lp: driver loaded but no devices found
[ 4.135135] systemd-journald[292]: Received request to flush runtime journal from PID 1
[ 4.778191] hv_vmbus: registering driver hyperv_fb
[ 4.785457] hyperv_fb: Screen resolution: 1152x864, Color depth: 32
[ 4.805299] checking generic (f8000000 1e0000) vs hw (f8000000 4000000)
[ 4.805300] fb: switching to hyperv_fb from VESA VGA
[ 4.805330] Console: switching to colour dummy device 80x25
[ 4.806396] Console: switching to colour frame buffer device 144x54
[ 4.841543] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 10737418240 ms ovfl timer
[ 4.841544] RAPL PMU: hw unit of domain pp0-core 2^-0 Joules
[ 4.841544] RAPL PMU: hw unit of domain package 2^-0 Joules
[ 4.841545] RAPL PMU: hw unit of domain dram 2^-16 Joules
[ 4.964504] hv_vmbus: registering driver hv_balloon
[ 4.965174] hv_balloon: Using Dynamic Memory protocol version 2.0
[ 5.059917] random: crng init done
[ 5.059936] random: 7 urandom warning(s) missed due to ratelimiting
[ 5.113857] AVX2 version of gcm_enc/dec engaged.
[ 5.113859] AES CTR mode by8 optimization enabled
[ 5.315926] Adding 2097148k swap on /dev/mapper/nagios--vg-swap_1. Priority:-2 extents:1 across:2097148k FS
[ 5.926858] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 5.931800] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 6.458594] audit: type=1400 audit(1549162823.544:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=547 comm="apparmor_parser"
[ 6.458599] audit: type=1400 audit(1549162823.544:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=547 comm="apparmor_parser"
[ 6.458601] audit: type=1400 audit(1549162823.544:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=547 comm="apparmor_parser"
[ 6.482675] audit: type=1400 audit(1549162823.568:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=546 comm="apparmor_parser"
[ 6.482679] audit: type=1400 audit(1549162823.568:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=546 comm="apparmor_parser"
[ 6.482681] audit: type=1400 audit(1549162823.568:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=546 comm="apparmor_parser"
[ 6.482683] audit: type=1400 audit(1549162823.568:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=546 comm="apparmor_parser"
[ 6.488078] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x01, buttons: 3/3
[ 6.490623] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input3
[ 6.492865] input: AT Translated Set 2 keyboard as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:07/VMBUS:01/d34b2567-b9b6-42b9-8778-0a4ec0b955bf/serio2/input/input5
[ 6.585769] audit: type=1400 audit(1549162823.672:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld" pid=556 comm="apparmor_parser"
[ 6.592717] audit: type=1400 audit(1549162823.680:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=558 comm="apparmor_parser"
[ 6.871008] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.871022] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 8.650518] audit: type=1400 audit(1549162825.736:11): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld" name="/sys/devices/system/node/" pid=808 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 53.066790] hv_balloon: Max. dynamic memory size: 4096 MB
[ 53.898216] Built 1 zonelists, mobility grouping on. Total pages: 506812
[ 53.898218] Policy zone: Normal
[63117.874794] hv_utils: TimeSync IC version 4.0
[149574.266819] hv_utils: TimeSync IC version 4.0
[236098.315990] hv_utils: TimeSync IC version 4.0
[322400.925200] hv_utils: TimeSync IC version 4.0
[361188.744471] FS-Cache: Loaded
[361188.784140] FS-Cache: Netfs 'cifs' registered for caching
[361188.784251] Key type cifs.spnego registered
[361188.784255] Key type cifs.idmap registered
[361331.498445] Unable to determine destination address.
[361384.015921] Unable to determine destination address.
[361398.743972] Unable to determine destination address.
[361401.383839] Unable to determine destination address.
[361447.862531] No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers=1.0 on mount.
[361448.030185] Status code returned 0xc000006d STATUS_LOGON_FAILURE
[361448.030206] CIFS VFS: Send error in SessSetup = -13
[361448.030318] CIFS VFS: cifs_mount failed w/return code = -13
[361448.030644] No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers=1.0 on mount.
[361448.048854] Status code returned 0xc000006d STATUS_LOGON_FAILURE
[361448.048870] CIFS VFS: Send error in SessSetup = -13
[361448.048929] CIFS VFS: cifs_mount failed w/return code = -13
[361484.755479] No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers=1.0 on mount.
[361484.781525] Status code returned 0xc000006d STATUS_LOGON_FAILURE
[361484.781539] CIFS VFS: Send error in SessSetup = -13
[361484.781610] CIFS VFS: cifs_mount failed w/return code = -13
[361484.781950] No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers=1.0 on mount.
[361484.805164] Status code returned 0xc000006d STATUS_LOGON_FAILURE
[361484.805173] CIFS VFS: Send error in SessSetup = -13
[361484.805205] CIFS VFS: cifs_mount failed w/return code = -13
[361575.440059] No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers=1.0 on mount.
[361575.468460] Status code returned 0xc000006d STATUS_LOGON_FAILURE
[361575.468474] CIFS VFS: Send error in SessSetup = -13
[361575.468559] CIFS VFS: cifs_mount failed w/return code = -13
[361575.468812] No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers=1.0 on mount.
[361575.491159] Status code returned 0xc000006d STATUS_LOGON_FAILURE
[361575.491171] CIFS VFS: Send error in SessSetup = -13
[361575.491236] CIFS VFS: cifs_mount failed w/return code = -13
[361616.087087] No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers=1.0 on mount.
[361616.110305] Status code returned 0xc0000234 STATUS_ACCOUNT_LOCKED_OUT
[361616.110319] CIFS VFS: Send error in SessSetup = -5
[361616.110405] CIFS VFS: cifs_mount failed w/return code = -5
[361620.317297] No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers=1.0 on mount.
[361620.333631] Status code returned 0xc0000234 STATUS_ACCOUNT_LOCKED_OUT
[361620.333640] CIFS VFS: Send error in SessSetup = -5
[361620.333680] CIFS VFS: cifs_mount failed w/return code = -5
[363929.610138] No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers=1.0 on mount.
[363929.633924] Status code returned 0xc000006d STATUS_LOGON_FAILURE
[363929.633934] CIFS VFS: Send error in SessSetup = -13
[363929.633978] CIFS VFS: cifs_mount failed w/return code = -13
[363929.634122] No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers=1.0 on mount.
[363929.648196] Status code returned 0xc000006d STATUS_LOGON_FAILURE
[363929.648206] CIFS VFS: Send error in SessSetup = -13
[363929.648247] CIFS VFS: cifs_mount failed w/return code = -13
[363941.969402] No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers=1.0 on mount.
[364929.519736] CIFS VFS: Free previous auth_key.response = 000000000104dd59
nagios@nagios:/var/log$ sestatus
SELinux status: disabled