Nagios Core 4.3.4
I had a major system issue and I rebuilt my entire hardware info structure
All My ESXI Hosts were rebuilt
All my VMs were intact since they all were stored on external NAS devices.
I have not run Nagios during that time.
Today finally I decided to start my Nagios Monitoring again.
I have Windows 2012 Windows 2016 Windows 2019 Servers Desktop Windows 10 7 and 8 Some Linux, Meraki Devices Cisco Devices Printers all monitored by Nagios.
I first ran this command
/usr/local/nagios/bin/nagios -vv /usr/local/nagios/etc/nagios.cfg
Was successful no errors
Then I started the Nagios service
All Windows servers/desktops have this issue
All my devices are ok just machine with nsclient which is 4.4.23
Any ideas
Thank you
Tom
CHECK_NRPE: Error - Could not complete SSL handshake
Re: CHECK_NRPE: Error - Could not complete SSL handshake
I figured this out.
My Nagios Core 4 is running on Ubuntu 16.4 and when my system failure the server went down .
After a restart the ip address was using DHCP and used a different address then my nsclients ini file had.
After resetting the ip address on the Nagios server all but one server/desktop starting working fine.
The one desktop had a firewall issue that I resolved today.
All working great. Glad to be back up and monitoring again.
This issue can be locked.
Thank you
My Nagios Core 4 is running on Ubuntu 16.4 and when my system failure the server went down .
After a restart the ip address was using DHCP and used a different address then my nsclients ini file had.
After resetting the ip address on the Nagios server all but one server/desktop starting working fine.
The one desktop had a firewall issue that I resolved today.
All working great. Glad to be back up and monitoring again.
This issue can be locked.
Thank you
-
- DevOps Engineer
- Posts: 19396
- Joined: Tue Nov 15, 2011 3:11 pm
- Location: Nagios Enterprises
- Contact:
Re: CHECK_NRPE: Error - Could not complete SSL handshake
Glad to hear this is resolved!kwhogster wrote:I figured this out.
My Nagios Core 4 is running on Ubuntu 16.4 and when my system failure the server went down .
After a restart the ip address was using DHCP and used a different address then my nsclients ini file had.
After resetting the ip address on the Nagios server all but one server/desktop starting working fine.
The one desktop had a firewall issue that I resolved today.
All working great. Glad to be back up and monitoring again.
This issue can be locked.
Thank you
Locking thread