Hi,
i have CentOS release 5.9 (Final), i installed nrpe which is indicated on https://darktraining.com/linux/30/ site.
But i encountered a problem.service daemon doesn't work.i defined/etc/services(nrpe 5666/tcp # NRPE)
while installing nrpe,i also have "make xxx" commands issue
[root@ulas_linux_test ~]# service nrpe start
Starting Nagios NRPE daemon (nrpe):
[root@ulas_linux_test ~]#
at nagios server side
root@dosya:~# /usr/local/nagios/libexec/check_nrpe -H 192.168.169.71
CHECK_NRPE: Error - Could not complete SSL handshake.
You have new mail in /var/mail/root
root@dosya:~# /usr/local/nagios/libexec/check_nrpe -n -H 192.168.169.71 -p 5666
CHECK_NRPE: Error receiving data from daemon.
root@dosya:~#
any support will appreciated
CentOS release 5.9 (Final) NRPE issue
-
- Skynet Drone
- Posts: 2620
- Joined: Wed Feb 11, 2015 1:56 pm
Re: CentOS release 5.9 (Final) NRPE issue
By default nrpe logs errors to /var/log/messages
and look for useful errors. If you don't find any set debug=1 in nrpe.cfg and reload nrpe (if running as a daemon) then try again.
Code: Select all
grep nrpe /var/log/messages
Re: CentOS release 5.9 (Final) NRPE issue
Thanks for your response,
i back to snapshot ,so my configuration went.
i try installing same way but i can't installing nrpe to my CENTOS machine.
i followed these sites
https://darktraining.com/linux/30/
http://sharadchhetri.com/2013/03/02/che ... ke-nagios/
http://tecadmin.net/install-nrpe-on-centos-rhel/
https://www.digitalocean.com/community/ ... n-centos-6
[root@ulas_linux_test src]# rpm -Uvh http://dl.fedoraproject.org/pub/epel/6/ ... noarch.rpm
Retrieving http://dl.fedoraproject.org/pub/epel/6/ ... noarch.rpm
warning: /var/tmp/rpm-xfer.MdtKPd: Header V3 RSA/SHA256 signature: NOKEY, key ID 0608b895
error: Failed dependencies:
rpmlib(FileDigests) <= 4.6.0-1 is needed by epel-release-6-8.noarch
rpmlib(PayloadIsXz) <= 5.2-1 is needed by epel-release-6-8.noarch
i back to snapshot ,so my configuration went.
i try installing same way but i can't installing nrpe to my CENTOS machine.
i followed these sites
https://darktraining.com/linux/30/
http://sharadchhetri.com/2013/03/02/che ... ke-nagios/
http://tecadmin.net/install-nrpe-on-centos-rhel/
https://www.digitalocean.com/community/ ... n-centos-6
[root@ulas_linux_test src]# rpm -Uvh http://dl.fedoraproject.org/pub/epel/6/ ... noarch.rpm
Retrieving http://dl.fedoraproject.org/pub/epel/6/ ... noarch.rpm
warning: /var/tmp/rpm-xfer.MdtKPd: Header V3 RSA/SHA256 signature: NOKEY, key ID 0608b895
error: Failed dependencies:
rpmlib(FileDigests) <= 4.6.0-1 is needed by epel-release-6-8.noarch
rpmlib(PayloadIsXz) <= 5.2-1 is needed by epel-release-6-8.noarch
-
- Skynet Drone
- Posts: 2620
- Joined: Wed Feb 11, 2015 1:56 pm
Re: CentOS release 5.9 (Final) NRPE issue
You can't install epel6 on a CentOS 5.x machine.
try
try
Code: Select all
rpm -Uvh http://download.fedoraproject.org/pub/epel/5/i386/repoview/epel-release.html