Graphs are not showing

This support forum board is for support questions relating to Nagios XI, our flagship commercial network monitoring solution.
Locked
redesgtt
Posts: 36
Joined: Mon May 16, 2016 2:57 am

Graphs are not showing

Post by redesgtt »

Our graphs are not showing since last night.

I think all service system are active:

Code: Select all

[root@nagiosxi var]# service npcd status
NPCD running (pid 20934).

Code: Select all

[root@nagiosxi var]# service ndo2db status
ndo2db (pid 24797) is running...

Code: Select all

[root@nagiosxi var]# service nagios status
nagios (pid 21301) is running...

Logs- Debugs:
[root@nagiosxi var]# tail -25 npcd.log

Code: Select all

[02-13-2017 10:02:52] NPCD: WARN: MAX load reached: load 31.720000/10.000000 at i=1
[02-13-2017 10:03:07] NPCD: DEBUG: load 32.060000/10.000000
[02-13-2017 10:03:07] NPCD: WARN: MAX load reached: load 32.060000/10.000000 at i=1
[02-13-2017 10:03:22] NPCD: DEBUG: load 30.800000/10.000000
[02-13-2017 10:03:22] NPCD: WARN: MAX load reached: load 30.800000/10.000000 at i=1
[02-13-2017 10:03:37] NPCD: DEBUG: load 29.720000/10.000000
[02-13-2017 10:03:37] NPCD: WARN: MAX load reached: load 29.720000/10.000000 at i=1
[02-13-2017 10:03:52] NPCD: DEBUG: load 26.340000/10.000000
[02-13-2017 10:03:52] NPCD: WARN: MAX load reached: load 26.340000/10.000000 at i=1
[02-13-2017 10:04:07] NPCD: DEBUG: load 24.860000/10.000000
[02-13-2017 10:04:07] NPCD: WARN: MAX load reached: load 24.860000/10.000000 at i=1
[02-13-2017 10:04:22] NPCD: DEBUG: load 23.830000/10.000000
[02-13-2017 10:04:22] NPCD: WARN: MAX load reached: load 23.830000/10.000000 at i=1
[02-13-2017 10:04:37] NPCD: DEBUG: load 22.650000/10.000000
[02-13-2017 10:04:37] NPCD: WARN: MAX load reached: load 22.650000/10.000000 at i=1
[02-13-2017 10:04:52] NPCD: DEBUG: load 21.930000/10.000000
[02-13-2017 10:04:52] NPCD: WARN: MAX load reached: load 21.930000/10.000000 at i=1
[02-13-2017 10:05:07] NPCD: DEBUG: load 22.210000/10.000000
[02-13-2017 10:05:07] NPCD: WARN: MAX load reached: load 22.210000/10.000000 at i=1
[02-13-2017 10:05:22] NPCD: DEBUG: load 21.670000/10.000000
service npcd restart:

Code: Select all

NPCD Stopped.
DEBUG: Config File = /usr/local/nagios/etc/pnp/npcd.cfg
CONFIG_OPT_LOGTYPE = file
CONFIG_OPT_LOGFILE = /usr/local/nagios/var/npcd.log
CONFIG_OPT_LOGFILESIZE = 10485760
CONFIG_OPT_LOGLEVEL = -1
CONFIG_OPT_SCANDIR = /var/nagiosramdisk/spool/perfdata/
CONFIG_OPT_RUNCMD = /usr/local/nagios/libexec/process_perfdata.pl
CONFIG_OPT_RUNCMD_ARG = -b
CONFIG_OPT_MAXTHREADS = 5
CONFIG_OPT_LOAD = 10.0
CONFIG_OPT_USER = nagios
CONFIG_OPT_GROUP = nagios
CONFIG_OPT_PIDFILE = /usr/local/nagiosxi/var/subsys/npcd.pid
CONFIG_OPT_SLEEPTIME = 15
CONFIG_OPT_IDENTMYSELF = (null)
---------------------------
DEBUG: load_threshold is enabled - ('10.000000')
NPCD started.
the problem:
But perfdata.log was stopped last night at 00:18:

Code: Select all

root@nagiosxi var]# tail -25 perfdata.log 
2017-02-13 00:18:03 [31747] [2] Template is check_bw_snmp.php
2017-02-13 00:18:03 [31747] [2] No Custom Template found for check_bw_snmp (/usr/local/nagios/etc/pnp/check_commands/check_bw_snmp.cfg) 
2017-02-13 00:18:03 [31747] [2] Template is check_bw_snmp.php
2017-02-13 00:18:03 [31747] [2] No Custom Template found for check_bw_snmp (/usr/local/nagios/etc/pnp/check_commands/check_bw_snmp.cfg) 
2017-02-13 00:18:03 [31747] [2] Template is check_bw_snmp.php
2017-02-13 00:18:03 [31747] [2] No Custom Template found for check_bw_snmp (/usr/local/nagios/etc/pnp/check_commands/check_bw_snmp.cfg) 
2017-02-13 00:18:03 [31747] [2] Template is check_bw_snmp.php
2017-02-13 00:18:03 [31747] [2] No Custom Template found for check_bw_snmp (/usr/local/nagios/etc/pnp/check_commands/check_bw_snmp.cfg) 
2017-02-13 00:18:03 [31747] [2] Template is check_bw_snmp.php
2017-02-13 00:18:03 [31747] [2] data2rrd called
2017-02-13 00:18:03 [31747] [2] RRDs::update /usr/local/nagios/share/perfdata/raytolaspalmas/Ancho_de_banda_PRINCIPAL.rrd 1486940941:0.00:0.00:0.8:0.96:2549831499:3216412633
2017-02-13 00:18:03 [31747] [2] /usr/local/nagios/share/perfdata/raytolaspalmas/Ancho_de_banda_PRINCIPAL.rrd updated
2017-02-13 00:18:03 [31747] [2] Processing Line 587
2017-02-13 00:18:03 [31747] [2] Datatype set to 'SERVICEPERFDATA' 
2017-02-13 00:18:03 [31747] [1] Found Performance Data for sai1Alicante / Temperatura_SAI (TEMP=19;29;30) 
2017-02-13 00:18:03 [31747] [2] No Custom Template found for check_snmp_sensorSAI (/usr/local/nagios/etc/pnp/check_commands/check_snmp_sensorSAI.cfg) 
2017-02-13 00:18:03 [31747] [2] Template is check_snmp_sensorSAI.php
2017-02-13 00:18:03 [31747] [2] data2rrd called
2017-02-13 00:18:03 [31747] [2] RRDs::update /usr/local/nagios/share/perfdata/sai1Alicante/Temperatura_SAI.rrd 1486940941:19
2017-02-13 00:18:04 [31747] [2] /usr/local/nagios/share/perfdata/sai1Alicante/Temperatura_SAI.rrd updated
2017-02-13 00:18:04 [31747] [2] Processing Line 588
2017-02-13 00:18:04 [31747] [2] No Perfdata. Skipping line 588
2017-02-13 00:18:04 [31747] [1] 588 lines processed
2017-02-13 00:18:04 [31747] [1] /var/nagiosramdisk/spool/perfdata//1486940941.perfdata.service-PID-31747 deleted
2017-02-13 00:18:04 [31747] [1] PNP exiting (runtime 15.685863s) ...
of course, the log is active, with 2 level:
[root@nagiosxi xidpe]# cat /usr/local/nagios/etc/pnp/process_perfdata.cfg

Code: Select all

#
# Config File for process_perfdata.pl
#
# $Id: process_perfdata.cfg-sample.in 520 2008-09-16 12:50:10Z pitchfork $
#
# process_perfdata.pl Timout 
#
TIMEOUT = 20
#
# Use RRDs Perl Module
#
USE_RRDs = 1 
#
# 
#
RRDPATH = /usr/local/nagios/share/perfdata
#
#
#
RRDTOOL = /usr/bin/rrdtool
#
#
#
CFG_DIR = /usr/local/nagios/etc/pnp
#
#
#
RRD_HEARTBEAT = 8460 
#
#
#
RRA_CFG = /usr/local/nagios/etc/pnp/rra.cfg
#
#
#
RRA_STEP = 60
#
#
#
LOG_FILE = /usr/local/nagios/var/perfdata.log
#
# Loglevel 0=silent 1=normal 2=debug
#
LOG_LEVEL = 2
#
# XML encoding
# The supported encodings are ISO-8859-1, UTF-8 and US-ASCII.
# http://www.php.net/xml-parser-create
XML_ENC = UTF-8
#
# EXPERIMENTAL rrdcached Support
# Use only with rrdtool svn revision 1511+
#
# RRD_DAEMON_OPTS = unix:/tmp/rrdcached.sock
And all graphs has been stopped last nigth at 00:00 more or less:
Image

but in service status detail, Performance Data is getting datas
Image

this is our settings and paths about PNP:
nagios.cfg

Code: Select all

# PNP settings - bulk mode with NCPD
process_performance_data=1
# service performance data
service_perfdata_file=/var/nagiosramdisk/service-perfdata
service_perfdata_file_template=DATATYPE::SERVICEPERFDATA\tTIMET::$TIMET$\tHOSTNAME::$HOSTNAME$\tSERVICEDESC::$SERVICEDESC$\tSERVICEPERFDATA::$SERVICEPERFDATA$\tSERVICECHECKCOMMAND:
:$SERVICECHECKCOMMAND$\tHOSTSTATE::$HOSTSTATE$\tHOSTSTATETYPE::$HOSTSTATETYPE$\tSERVICESTATE::$SERVICESTATE$\tSERVICESTATETYPE::$SERVICESTATETYPE$\tSERVICEOUTPUT::$SERVICEOUTPUT$
service_perfdata_file_mode=a
service_perfdata_file_processing_interval=15
service_perfdata_file_processing_command=process-service-perfdata-file-bulk
# host performance data
host_perfdata_file=/var/nagiosramdisk/host-perfdata
host_perfdata_file_template=DATATYPE::HOSTPERFDATA\tTIMET::$TIMET$\tHOSTNAME::$HOSTNAME$\tHOSTPERFDATA::$HOSTPERFDATA$\tHOSTCHECKCOMMAND::$HOSTCHECKCOMMAND$\tHOSTSTATE::$HOSTSTATE$
\tHOSTSTATETYPE::$HOSTSTATETYPE$\tHOSTOUTPUT::$HOSTOUTPUT$
host_perfdata_file_mode=a
host_perfdata_file_processing_interval=15
host_perfdata_file_processing_command=process-host-perfdata-file-bulk
commands.cfg

Code: Select all

define command {
       command_name                             process-service-perfdata-file-bulk
       command_line                             /bin/mv /var/nagiosramdisk/service-perfdata /var/nagiosramdisk/spool/xidpe/$TIMET$.perfdata.service
}
define command {
       command_name                             process-host-perfdata-file-bulk
       command_line                             /bin/mv /var/nagiosramdisk/host-perfdata /var/nagiosramdisk/spool/xidpe/$TIMET$.perfdata.host
}
And these are running, because timet 1486977438 is
GMT/UTC: Mon, 13 Feb 2017 09:17:18 GMT
En su tiempo: 13/2/2017 10:17:18
(it is ok)

[root@nagiosxi xidpe]# tail 25 /var/nagiosramdisk/service-perfdata

Code: Select all

==> /var/nagiosramdisk/service-perfdata <==
DATATYPE::SERVICEPERFDATA       TIMET::1486977438       HOSTNAME::raytoavila    SERVICEDESC::Ancho_de_banda     SERVICEPERFDATA::inUsage=0.13%;80;90 outUsage=1.40%;80;90 inBandwidth=10.08Kbs outBandwidth=10.88Kbs inAbsolut=2679554260 outAbsolut=4069659442     SERVICECHECKCOMMAND::check_bw_snmp!80!90!!!!!!  HOSTSTATE::UP   HOSTSTATETYPE::HARD     SERVICESTATE::OK    SERVICESTATETYPE::HARD  SERVICEOUTPUT::Average IN: 10.08Kbs (0.13%), Average OUT: 10.88Kbs (1.40%)<br>Total RX: 20443.38 Mbits, Total TX: 31049.04 Mbits
DATATYPE::SERVICEPERFDATA       TIMET::1486977439       HOSTNAME::swaytosagunto SERVICEDESC::Uso_de_Memoria_Cisco       SERVICEPERFDATA::Memoria=60;75;90       SERVICECHECKCOMMAND::check_mem_snmp.router!75!90!1!2!!!!    HOSTSTATE::UP   HOSTSTATETYPE::SOFT     SERVICESTATE::OK        SERVICESTATETYPE::HARD  SERVICEOUTPUT::OK (w75/c90) - usado 60%
DATATYPE::SERVICEPERFDATA       TIMET::1486977439       HOSTNAME::sSAGUNTO      SERVICEDESC::NSClient_Windows_TotalConnections  SERVICEPERFDATA::'connections'=17;60;80;        SERVICECHECKCOMMAND::check_nsclient_CurrentConnections!60!80!_Total!!!!!    HOSTSTATE::UP   HOSTSTATETYPE::SOFT     SERVICESTATE::OK        SERVICESTATETYPE::HARD  SERVICEOUTPUT::OK (w60/c80) - connections: 17
DATATYPE::SERVICEPERFDATA       TIMET::1486977439       HOSTNAME::SCBDPREPASE1  SERVICEDESC::NSClient_Windows_Disk_H    SERVICEPERFDATA::'DISKH:'=9;60;90;      SERVICECHECKCOMMAND::check_nsclient_disk!H!60!90!!!!!       HOSTSTATE::UP   HOSTSTATETYPE::HARD     SERVICESTATE::OK        SERVICESTATETYPE::HARD  SERVICEOUTPUT::OK (w60/c90) - H: 586 MB (9%)
DATATYPE::SERVICEPERFDATA       TIMET::1486977439       HOSTNAME::bdapat2       SERVICEDESC::NSClient_Windows_MEM       SERVICEPERFDATA::'MEM'=7;90;95;0;100    SERVICECHECKCOMMAND::check_nsclient_mem!90!95!!!!!! HOSTSTATE::UP   HOSTSTATETYPE::HARD     SERVICESTATE::OK        SERVICESTATETYPE::HARD  SERVICEOUTPUT::OK (w90/c95) - usado: 2539 MB (7%)
DATATYPE::SERVICEPERFDATA       TIMET::1486977439       HOSTNAME::SBURGOS       SERVICEDESC::NSClient_Windows_CPU       SERVICEPERFDATA::'CPU'=1;90;95; SERVICECHECKCOMMAND::check_nsclient_cpu_mcores!90!95!!!!!!  HOSTSTATE::UP   HOSTSTATETYPE::HARD     SERVICESTATE::OK        SERVICESTATETYPE::HARD  SERVICEOUTPUT::OK (w90/c95) - usado 1%
DATATYPE::SERVICEPERFDATA       TIMET::1486977439       HOSTNAME::rcallalicante SERVICEDESC::Latencia_ISP_PRINCIPAL     SERVICEPERFDATA::'RTT'=8;100;300;       SERVICECHECKCOMMAND::check_isp!100!300!5!2!!!!      HOSTSTATE::UP   HOSTSTATETYPE::HARD     SERVICESTATE::OK        SERVICESTATETYPE::HARD  SERVICEOUTPUT::OK - 172.29.0.57 (w100/c300) - 8ms
DATATYPE::SERVICEPERFDATA       TIMET::1486977439       HOSTNAME::INETNIW1      SERVICEDESC::NSClient_Windows_CurrentConnections_EXPLOTACION_   SERVICEPERFDATA::'connections'=0;60;80;     SERVICECHECKCOMMAND::check_nsclient_CurrentConnections!60!80!EXPLOTACION!!!!!   HOSTSTATE::UP   HOSTSTATETYPE::HARD     SERVICESTATE::OK        SERVICESTATETYPE::HARD  SERVICEOUTPUT::OK (w60/c80) - connections: 0
DATATYPE::SERVICEPERFDATA       TIMET::1486977439       HOSTNAME::SIT01 SERVICEDESC::NSClient_Windows_CurrentConnections_EXPLOTACION_   SERVICEPERFDATA::'connections'=3;60;80; SERVICECHECKCOMMAND::check_nsclient_CurrentConnections!60!80!EXPLOTACION!!!!!       HOSTSTATE::UP   HOSTSTATETYPE::HARD     SERVICESTATE::OK        SERVICESTATETYPE::HARD  SERVICEOUTPUT::OK (w60/c80) - connections: 3
DATATYPE::SERVICEPERFDATA       TIMET::1486977439       HOSTNAME::rapat1        SERVICEDESC::Ancho_de_banda     SERVICEPERFDATA::inUsage=0.03%;80;90 outUsage=0.03%;80;90 inBandwidth=29.92Kbs outBandwidth=33.52Kbs inAbsolut=1055154082 outAbsolut=3498153070     SERVICECHECKCOMMAND::check_bw_snmp!80!90!!!!!!  HOSTSTATE::UP   HOSTSTATETYPE::HARD     SERVICESTATE::OK    SERVICESTATETYPE::HARD  SERVICEOUTPUT::Average IN: 29.92Kbs (0.03%), Average OUT: 33.52Kbs (0.03%)<br>Total RX: 8050.19 Mbits, Total TX: 26688.79 Mbits
I have tried to reset all components (nagios core, performance grapher and database backend):
Image

Tail -f nagios.log while I do "Apply Configuration"

Code: Select all

[1486983766] Caught SIGTERM, shutting down...
[1486983768] Successfully shutdown... (PID=21301)
[1486983768] Event broker module 'NERD' deinitialized successfully.
[1486983769] livestatus: Socket thread has terminated
[1486983769] Event broker module '/usr/local/lib/mk-livestatus/livestatus.o' deinitialized successfully.
[1486983769] ndomod: Shutdown complete.
[1486983769] Event broker module '/usr/local/nagios/bin/ndomod.o' deinitialized successfully.
[1486983771] Nagios 4.2.4 starting... (PID=15049)
[1486983771] Local time is Mon Feb 13 12:02:51 CET 2017
[1486983771] LOG VERSION: 2.0
[1486983771] qh: Socket '/usr/local/nagios/var/rw/nagios.qh' successfully initialized
[1486983771] qh: core query handler registered
[1486983771] nerd: Channel hostchecks registered successfully
[1486983771] nerd: Channel servicechecks registered successfully
[1486983771] nerd: Channel opathchecks registered successfully
[1486983771] nerd: Fully initialized and ready to rock!
[1486983771] wproc: Successfully registered manager as @wproc with query handler
[1486983771] wproc: Registry request: name=Core Worker 15057;pid=15057
[1486983771] wproc: Registry request: name=Core Worker 15054;pid=15054
[1486983771] wproc: Registry request: name=Core Worker 15056;pid=15056
[1486983771] wproc: Registry request: name=Core Worker 15052;pid=15052
[1486983771] wproc: Registry request: name=Core Worker 15055;pid=15055
[1486983771] wproc: Registry request: name=Core Worker 15053;pid=15053
[1486983771] livestatus: Livestatus 1.2.8 by Mathias Kettner. Socket: '/usr/local/nagios/rw/mklive'
[1486983771] livestatus: Please visit us at http://mathias-kettner.de/
[1486983771] livestatus: Hint: please try out OMD - the Open Monitoring Distribution
[1486983771] livestatus: Please visit OMD at http://omdistro.org
[1486983781] livestatus: Finished initialization. Further log messages go to /usr/local/nagios/var/livestatus.log
[1486983781] Event broker module '/usr/local/lib/mk-livestatus/livestatus.o' initialized successfully.
[1486983781] ndomod: NDOMOD 2.1.2 (11-14-2016) Copyright (c) 2009 Nagios Core Development Team and Community Contributors
[1486983781] ndomod: Successfully connected to data sink.  0 queued items to flush.
[1486983781] ndomod registered for process data
[1486983781] ndomod registered for log data'
[1486983781] ndomod registered for system command data'
[1486983781] ndomod registered for event handler data'
[1486983781] ndomod registered for notification data'
[1486983781] ndomod registered for comment data'
[1486983781] ndomod registered for downtime data'
[1486983781] ndomod registered for flapping data'
[1486983781] ndomod registered for program status data'
[1486983781] ndomod registered for host status data'
[1486983781] ndomod registered for service status data'
[1486983781] ndomod registered for adaptive program data'
[1486983781] ndomod registered for adaptive host data'
[1486983781] ndomod registered for adaptive service data'
[1486983781] ndomod registered for external command data'
[1486983781] ndomod registered for aggregated status data'
[1486983781] ndomod registered for retention data'
[1486983781] ndomod registered for contact data'
[1486983781] ndomod registered for contact notification data'
[1486983781] ndomod registered for acknowledgement data'
[1486983781] ndomod registered for state change data'
[1486983781] ndomod registered for contact status data'
[1486983781] ndomod registered for adaptive contact data'
[1486983781] Event broker module '/usr/local/nagios/bin/ndomod.o' initialized successfully.
[1486983785] Successfully launched command file worker with pid 15303


I think I have some problem with perfdata. The unique "log" is not updated is "perfdata.log" like I have showed you.
But I don't know what do.


asking off-topic: How can I put my posts only for registered users?

Regards.
You do not have the required permissions to view the files attached to this post.
Top
rkennedy
Posts: 6579
Joined: Mon Oct 05, 2015 11:45 am

Re: Graphs are not showing

Post by rkennedy »

Code: Select all

[02-13-2017 10:04:52] NPCD: WARN: MAX load reached: load 21.930000/10.000000 at i=1
[02-13-2017 10:05:07] NPCD: DEBUG: load 22.210000/10.000000
[02-13-2017 10:05:07] NPCD: WARN: MAX load reached: load 22.210000/10.000000 at i=1
[02-13-2017 10:05:22] NPCD: DEBUG: load 21.670000/10.000000
This is generally an indicator to me as to what was going on. Can PM over a profile to myself and dwhitfield for us to review? I'd like to see what's going on with your system. (Admin -> System PRofile -> Download Profile)
Former Nagios Employee
Top
redesgtt
Posts: 36
Joined: Mon May 16, 2016 2:57 am

Re: Graphs are not showing

Post by redesgtt »

Finally We restarted server and the issue has been resolved. But it is not the first time this happens. I wish it would not happen again in the future, becasue the only solution I have found until now is restart the server.

How can I send you my Profile? This forum thread is public. I would prefer only forum administrator were able to see it.

thanks

by the way, now, after restart server, the npcd.log shows:

Code: Select all

os/libexec/process_perfdata.pl -n -b /var/nagiosramdisk/spool/perfdata//1487057882.perfdata.host
[02-14-2017 08:38:21] NPCD: Processing file '1487057882.perfdata.host'
[02-14-2017 08:38:21] NPCD: DEBUG: load 3.980000/10.000000
[02-14-2017 08:38:21] NPCD: ThreadCounter 1/5 File is 1487057882.perfdata.service
[02-14-2017 08:38:21] NPCD: Regular File: 1487057882.perfdata.service
[02-14-2017 08:38:21] NPCD: A thread was started on thread_counter = 1
[02-14-2017 08:38:21] NPCD: Have to wait: Filecounter = 2 - thread_counter = 2
[02-14-2017 08:38:21] NPCD: Processing file 1487057882.perfdata.service with ID 140310110881536 - going to exec /usr/local/nagios/libexec/process_perfdata.pl -n -b /var/nagiosramdisk/spool/perfdata//1487057882.perfdata.service
[02-14-2017 08:38:21] NPCD: Processing file '1487057882.perfdata.service'
[02-14-2017 08:38:23] NPCD: No more files to process... waiting for 15 seconds
[02-14-2017 08:38:38] NPCD: Found 4 files in /var/nagiosramdisk/spool/perfdata/
[02-14-2017 08:38:38] NPCD: DEBUG: load 3.350000/10.000000
[02-14-2017 08:38:38] NPCD: ThreadCounter 0/5 File is .
[02-14-2017 08:38:38] NPCD: DEBUG: load 3.350000/10.000000
[02-14-2017 08:38:38] NPCD: ThreadCounter 0/5 File is ..
[02-14-2017 08:38:38] NPCD: DEBUG: load 3.350000/10.000000
[02-14-2017 08:38:38] NPCD: ThreadCounter 0/5 File is 1487057897.perfdata.host
[02-14-2017 08:38:38] NPCD: Regular File: 1487057897.perfdata.host
[02-14-2017 08:38:38] NPCD: A thread was started on thread_counter = 0
graphs are shown
Top
rkennedy
Posts: 6579
Joined: Mon Oct 05, 2015 11:45 am

Re: Graphs are not showing

Post by rkennedy »

It would appear be performance based, or something locking up. We would need to see a profile when everything has halted again. Feel free to PM them over to us if you'd like to avoid it being posted on the public forum.
Former Nagios Employee
Top
tmcdonald
Posts: 9117
Joined: Mon Sep 23, 2013 8:40 am

Re: Graphs are not showing

Post by tmcdonald »

Just checking in since we have not heard from you in a while. Did @rkennedy's post clear things up or has the issue otherwise been resolved?
Former Nagios employee
Top
redesgtt
Posts: 36
Joined: Mon May 16, 2016 2:57 am

Re: Graphs are not showing

Post by redesgtt »

tmcdonald wrote:Just checking in since we have not heard from you in a while. Did @rkennedy's post clear things up or has the issue otherwise been resolved?
Yes. Please close this thread.

Thanks a lot for your support
Top
Locked

Return to “Nagios XI”