Hi ,
In my environment we need to install trend micro deep security agent(ds_agent).
After the trendmicro vendor load the module, my nagios server utilization became high and was force to restart.
I would like to know is the trendmicro deepsecurity compatible with nagios ?
OS= rhel6.5
nagios 5.4.0
DSM 9.5.2456
Kindly advise.
Thanks
nagios compability issue.
Re: nagios compability issue.
You might also want to contact Trend Micro regarding this. I would expect that if the ds_agent is attempting to do in-depth process monitoring, it might have it's work cut out for it when attempting to monitor the entirety of Nagios XI.
Do you have measurements of what, if any, processes are experiencing increased resource usage when ds_agent is running?
Do you have measurements of what, if any, processes are experiencing increased resource usage when ds_agent is running?
Former Nagios employee
https://www.mcapra.com/
https://www.mcapra.com/
-
- DevOps Engineer
- Posts: 19396
- Joined: Tue Nov 15, 2011 3:11 pm
- Location: Nagios Enterprises
- Contact:
Re: nagios compability issue.
I have not heard of the problem, however if it happened right after loading their module, it sounds like a problem with their module, and I would contact the vendor.s.wiki wrote:Hi ,
In my environment we need to install trend micro deep security agent(ds_agent).
After the trendmicro vendor load the module, my nagios server utilization became high and was force to restart.
I would like to know is the trendmicro deepsecurity compatible with nagios ?
OS= rhel6.5
nagios 5.4.0
DSM 9.5.2456
Kindly advise.
Thanks
Re: nagios compability issue.
Hi Guys,
Thank you for your reply, I did contacted to trendmicro but I think it is better with both side.
Could it be the compatibility issue between trendmicro and the plugin?
Thank you for your reply, I did contacted to trendmicro but I think it is better with both side.
All check_nwc_health plugin became "D" status in top and then CPU average load increases, and I could not see further information as the server was hung.Do you have measurements of what, if any, processes are experiencing increased resource usage when ds_agent is running?
Could it be the compatibility issue between trendmicro and the plugin?
-
- DevOps Engineer
- Posts: 19396
- Joined: Tue Nov 15, 2011 3:11 pm
- Location: Nagios Enterprises
- Contact:
Re: nagios compability issue.
It's possible. Or it was a problem with the installation of the module (could even be the machine ran out of memory ) After you reset the machine did the system resume properly?s.wiki wrote:All check_nwc_health plugin became "D" status in top and then CPU average load increases, and I could not see further information as the server was hung.
Could it be the compatibility issue between trendmicro and the plugin?
Re: nagios compability issue.
I had to chkconfig ds_agent off before reset the machine, else the server will be very slow during boot up.scottwilkerson wrote:It's possible. Or it was a problem with the installation of the module (could even be the machine ran out of memory ) After you reset the machine did the system resume properly?s.wiki wrote:All check_nwc_health plugin became "D" status in top and then CPU average load increases, and I could not see further information as the server was hung.
Could it be the compatibility issue between trendmicro and the plugin?
Re: nagios compability issue.
Hi,
If i were to ask the trendmicro to whiltelist/exclude nagios plugin from their scanning. May I know which path/directory I have to ask them to exclude
Thanks
If i were to ask the trendmicro to whiltelist/exclude nagios plugin from their scanning. May I know which path/directory I have to ask them to exclude
Thanks
Re: nagios compability issue.
Hello s.wiki,
exclude /usr/local/nagios/libexec and (perhaps) /usr/local/nagios/bin and /usr/local/nagios/sbin
Perhaps easier to simply exclude "/usr/local/nagios" recursively
Let us know if this resolves your issue.
exclude /usr/local/nagios/libexec and (perhaps) /usr/local/nagios/bin and /usr/local/nagios/sbin
Perhaps easier to simply exclude "/usr/local/nagios" recursively
Let us know if this resolves your issue.