Hi @h4doukeeN,
You can easily monitor Port utilization on the router as well as the current port status. Additionally, by querying other SNMP metric on the router with Nagios plugins you can monitor the following metrics for each port on the router
ifInUcastPkts
ifOutUcastPkts
ifInNUcastPkts
ifOutNUcastPkts
ifInDiscards
ifOutDiscards
ifInErrors
ifOutErrors
ifInUnknownProtos
and many others.
Therefore,in your case,you could monitor a port at which your transceiver is connected to your router. e.g you could monitor port utilization and if that port utilizatiion is zero then transceiver has stopped working
Can monitor transceiver feed router?
Re: Can monitor transceiver feed router?
you could give me a help through which plugin to be able to do it is a cisco 2911, I have the cisco_catalyst.pl and cisco_env_stats, I do not handle the command line and how to add it to nagios. I hope I'm not asking for much maybe something to read how to do it.dwasswa wrote:Hi @h4doukeeN,
You can easily monitor Port utilization on the router as well as the current port status. Additionally, by querying other SNMP metric on the router with Nagios plugins you can monitor the following metrics for each port on the router
ifInUcastPkts
ifOutUcastPkts
ifInNUcastPkts
ifOutNUcastPkts
ifInDiscards
ifOutDiscards
ifInErrors
ifOutErrors
ifInUnknownProtos
and many others.
Therefore,in your case,you could monitor a port at which your transceiver is connected to your router. e.g you could monitor port utilization and if port utilization is zero then transceiver is not working
Re: Can monitor transceiver feed router?
I could, thanks for the helpdwasswa wrote:Hi @h4doukeeN,
You can easily monitor Port utilization on the router as well as the current port status. In your case,you can track per-port bandwidth utilization at the port which your transceiver is connected to router and if its zero then transceiver is not working.
By querying other SNMP metric on the router with Nagios plugins you can monitor the following metrics for each port on the router
ifInUcastPkts
ifOutUcastPkts
ifInNUcastPkts
ifOutNUcastPkts
ifInDiscards
ifOutDiscards
ifInErrors
ifOutErrors
ifInUnknownProtos
check_cisco.pl
define command{
command_name check_cisco
command_line $USER1$/check_cisco.pl -H $HOSTADDRESS$ $USER7$ -n $ARG1$ $ARG2$
}
___
define service{
use generic-service ; Inherit values from a template
host_name 00-Cisco2911-Col
service_description Check_Interface_Port_0/1
check_command check_cisco!-C YOLITO -i GigabitEthernet0/1
}
Thank you
Re: Can monitor transceiver feed router?
Am glad that we could get this working.
If you have any questions you can open a new thread but am going to close as resolved.
Thanks for using the nagios support forums!
If you have any questions you can open a new thread but am going to close as resolved.
Thanks for using the nagios support forums!