Fuse 4.1.7 to NagXI 5.5.10

This support forum board is for questions relating to Nagios Fusion.
Locked
P201420
Posts: 28
Joined: Fri Feb 15, 2019 9:22 am

Fuse 4.1.7 to NagXI 5.5.10

Post by P201420 »

Fusion - shows red dots (auth failed) in upper right for xi boxes - even after test fushion setting pass with both fusekey and session auth pass.
can launch to xi from servers pull down.

have removed all fused servers and re-added passing fuse test but never works outside of adding fuse server screen

also fusion logs page is blank on load.

have reboot server

ideas
Thanks
ssax
Dreams In Code
Posts: 7682
Joined: Wed Feb 11, 2015 12:54 pm

Re: Fuse 4.1.7 to NagXI 5.5.10

Post by ssax »

What are you seeing in this log file?

Code: Select all

/usr/local/nagiosfusion/var/log/poll_subsys.log
User avatar
lmiltchev
Former Nagios Staff
Posts: 13587
Joined: Mon May 23, 2011 12:15 pm

Re: Fuse 4.1.7 to NagXI 5.5.10

Post by lmiltchev »

Did you wait long enough? I believe the default "Global Authentication Interval" value is set to 300 seconds (5 min).

You could temporarily change it to let's say 10 sec to see if the red dots would disappear.

Admin > System Configuration > System Settings > Data & Polling

You will probably need to enable logging (at least temporarily) while troubleshooting the issue. Go to:

Admin > System Configuration > System Settings > General, select "Debug" from the "Log Level" drop-down menu, and click on "Update Settings". Give it some time, then check the logs:

Admin > System Information > Fusion Logs
Be sure to check out our Knowledgebase for helpful articles and solutions!
P201420
Posts: 28
Joined: Fri Feb 15, 2019 9:22 am

Re: Fuse 4.1.7 to NagXI 5.5.10

Post by P201420 »

This can be closed out

found issue was related to contents added to /etc/environment
removed items - everything started working.
items removed were


http_proxy=http://proxy.company.com/
ftp_proxy=http://proxy.company.com/
https_proxy=http://proxy.company.com/


Thanks!
User avatar
lmiltchev
Former Nagios Staff
Posts: 13587
Joined: Mon May 23, 2011 12:15 pm

Re: Fuse 4.1.7 to NagXI 5.5.10

Post by lmiltchev »

I am glad your issue has been resolved! I am locking this thread.
Be sure to check out our Knowledgebase for helpful articles and solutions!
Locked