Unable to get process status

Support forum for Nagios Core, Nagios Plugins, NCPA, NRPE, NSCA, NDOUtils and more. Engage with the community of users including those using the open source solutions.
Post Reply
jluna1982
Posts: 2
Joined: Wed Jul 13, 2022 8:25 am

Unable to get process status

Post by jluna1982 »

I've installed nagios 5 times now, to make sure I'm not doing anything wrong. And when I go to load the webpage at the end, I get a red X with "Unable to get process status" under the Nagios Core logo.

Does anyone know what this could be caused by? I followed all instructions per nagios installation guidelines.
DisastoArea
Posts: 2
Joined: Wed Aug 10, 2022 3:38 am

Re: Unable to get process status

Post by DisastoArea »

I had the same problem.
This information helped me.
https://github.com/NagiosEnterprises/na ... issues/861

/usr/local/nagios/etc/nagios.cfg
set --> from check_for_updates=0
DisastoArea
Posts: 2
Joined: Wed Aug 10, 2022 3:38 am

Re: Unable to get process status

Post by DisastoArea »

I had the same problem.
This information helped me.
https://github.com/NagiosEnterprises/na ... issues/861

Solution:
/usr/local/nagios/etc/nagios.cfg
Set:
check_for_updates=0
Post Reply