Nagios Support Forum

Posted: **Mon Jun 15, 2015 3:48 pm**

Sounds good, it's usually better to install perl modules with yum, it makes upgrading a lot easier because yum doesn't know about perl modules installed with cpan.

Posted: **Tue Jun 16, 2015 3:42 am**

Hi ssax,

I tried compileing the plugin again as you suggested however, I get the same error.

I then tried to install Sybase from yum, however, I got the below error

Code: Select all

Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
 * base: centos.muzzy.org.uk
 * epel: www.mirrorservice.org
 * extras: mirror.as29550.net
 * updates: mirror.as29550.net
No package perl-DBD-Sybase available.
Error: Nothing to do

Is there away to remove the cpan Sybase and install from yum? do I need to add another repo to install Sybase from yum? I had a nightmare installing Sybase the first time round!

Thanks for the help

Posted: **Tue Jun 16, 2015 11:05 am**

This package should be available from the rpmforge repo...

Code: Select all

yum search perl | grep Sybase
perl-DBD-Sybase.x86_64 : Perl module named DBD-Sybase

Code: Select all

yum provides perl-DBD-Sybase
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
 * base: mirror.us.leaseweb.net
 * epel: mirror.steadfast.net
 * extras: mirror.raystedman.net
 * rpmforge: mirror.nexcess.net
 * updates: ftpmirror.your.org
perl-DBD-Sybase-1.10-1.el6.rf.x86_64 : Perl module named DBD-Sybase
Repo        : rpmforge

What is the output of the following command?

Code: Select all

yum repolist -v

Posted: **Wed Jun 17, 2015 3:24 am**

Hi,

Running `yum search perl | grep Sybase` doesn't return anything, see below

Code: Select all

[root@9-srv-nagios downloads]# yum search perl | grep Sybase
[root@9-srv-nagios downloads]#

I have installed the rpmforge repo by following the below link for x64 CentoOS 7
http://www.tecmint.com/enable-rpmforge-repository/

When tring to install Sybase I got the below error `nothing to do`

Code: Select all

[root@9-srv-nagios downloads]# yum install perl-DBD-Sybase                      Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
 * base: mirror.as29550.net
 * epel: www.mirrorservice.org
 * extras: mirror.simwood.com
 * rpmforge: www.mirrorservice.org
 * updates: mirror.as29550.net
No package perl-DBD-Sybase available.
Error: Nothing to do

the results from running `yum repolist -v` are below

Code: Select all

[root@9-srv-nagios downloads]# yum repolist -v
Loading "fastestmirror" plugin
Config time: 0.008
Yum version: 3.4.3
Loading mirror speeds from cached hostfile
 * base: mirror.as29550.net
 * epel: www.mirrorservice.org
 * extras: mirror.simwood.com
 * rpmforge: www.mirrorservice.org
 * updates: mirror.as29550.net
Setting up Package Sacks
pkgsack time: 0.008
Repo-id      : base/7/x86_64
Repo-name    : CentOS-7 - Base
Repo-revision: 1427842153
Repo-updated : Tue Mar 31 23:50:46 2015
Repo-pkgs    : 8,652
Repo-size    : 6.3 G
Repo-mirrors : http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=os&infra=stock
Repo-baseurl : http://mirror.as29550.net/mirror.centos.org/7.1.1503/os/x86_64/
             : (9 more)
Repo-expire  : 21,600 second(s) (last: Wed Jun 17 09:08:24 2015)
Repo-filename: /etc/yum.repos.d/CentOS-Base.repo

Repo-id      : epel/x86_64
Repo-name    : Extra Packages for Enterprise Linux 7 - x86_64
Repo-revision: 1434217867
Repo-tags    : binary-x86_64
Repo-updated : Sat Jun 13 18:53:13 2015
Repo-pkgs    : 8,076
Repo-size    : 5.6 G
Repo-metalink: https://mirrors.fedoraproject.org/metalink?repo=epel-7&arch=x86_64
  Updated    : Sat Jun 13 18:53:13 2015
Repo-baseurl : http://www.mirrorservice.org/sites/dl.fedoraproject.org/pub/epel/7/x86_64/
             : (67 more)
Repo-expire  : 21,600 second(s) (last: Wed Jun 17 09:08:37 2015)
Repo-filename: /etc/yum.repos.d/epel.repo

Repo-id      : extras/7/x86_64
Repo-name    : CentOS-7 - Extras
Repo-revision: 1432315092
Repo-updated : Fri May 22 18:19:02 2015
Repo-pkgs    : 128
Repo-size    : 464 M
Repo-mirrors : http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=extras&infra=stock
Repo-baseurl : http://mirror.simwood.com/centos/7.1.1503/extras/x86_64/ (9 more)
Repo-expire  : 21,600 second(s) (last: Wed Jun 17 09:08:38 2015)
Repo-filename: /etc/yum.repos.d/CentOS-Base.repo

Repo-id      : rpmforge
Repo-name    : RHEL 7 - RPMforge.net - dag
Repo-updated : Fri Jul 11 02:46:42 2014
Repo-pkgs    : 245
Repo-size    : 198 M
Repo-baseurl : http://apt.sw.be/redhat/el7/en/x86_64/rpmforge/
Repo-mirrors : http://mirrorlist.repoforge.org/el7/mirrors-rpmforge
Repo-expire  : 21,600 second(s) (last: Wed Jun 17 09:08:45 2015)
Repo-filename: /etc/yum.repos.d/rpmforge.repo

Repo-id      : updates/7/x86_64
Repo-name    : CentOS-7 - Updates
Repo-revision: 1434398283
Repo-updated : Mon Jun 15 20:58:42 2015
Repo-pkgs    : 673
Repo-size    : 1.8 G
Repo-mirrors : http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=updates&infra=stock
Repo-baseurl : http://mirror.as29550.net/mirror.centos.org/7.1.1503/updates/x86_64/
             : (9 more)
Repo-expire  : 21,600 second(s) (last: Wed Jun 17 09:08:46 2015)
Repo-filename: /etc/yum.repos.d/CentOS-Base.repo

repolist: 17,774

Thanks

Posted: **Wed Jun 17, 2015 8:49 am**

Thanks for the help, I've resolved the issue.

I rolled back the VM to a time before I attempted to configure the check_mssql_health plugin, I added the nagios user to the suders file and then installed/configured the plugin and prerequisites as nagios using the sudo command.

Thanks again.

Posted: **Wed Jun 17, 2015 9:16 am**

Sounds good(ie)! I'll be closing this thread now, but feel free to open another if you need anything in the future!

Nagios Support Forum

check_mssql_health doesn't run as nagios user

Re: check_mssql_health doesn't run as nagios user

Re: check_mssql_health doesn't run as nagios user

Re: check_mssql_health doesn't run as nagios user

Re: check_mssql_health doesn't run as nagios user

Re: check_mssql_health doesn't run as nagios user

Re: check_mssql_health doesn't run as nagios user