Page 2 of 2
Re: Nagios thinks 2 NICs are unplugged with Half-height blad
Posted: Wed Mar 02, 2016 5:49 pm
by Box293
delite wrote:I am able to see the vSphere Distributed Switch showing that vmnic0 / vmnic1 are connected and vmnic2 / vmnic3 are disconnected. I have the option to remove those dvUplinks that are disconnected. Would doing that also be a way of resolving this error?
Yes.
You should investigate why they are disconnected. Perhaps they are not used which is fine, but if they are not used they should not be assigned to the switch.
Re: Nagios thinks 2 NICs are unplugged with Half-height blad
Posted: Fri Mar 04, 2016 3:19 pm
by delite
Thank you for the help. Management decided upon just disable those NICs from the switch.
Re: Nagios thinks 2 NICs are unplugged with Half-height blad
Posted: Mon Mar 07, 2016 12:56 pm
by bwallace
Thanks for that update. Were there any other questions, or may we lock this thread?
Re: Nagios thinks 2 NICs are unplugged with Half-height blad
Posted: Tue Mar 08, 2016 9:52 am
by delite
I have no other questions. Thank you for the help.
Re: Nagios thinks 2 NICs are unplugged with Half-height blad
Posted: Tue Mar 08, 2016 10:04 am
by bwallace
Glad we were able to help. We'll lock this thread now and feel free to open another should you require assistance with anything else.