so just retoring the backed up files and unmounting the disk will do the trick?
You will have to delete the "
/etc/sysconfig/nagios"
and reboot.
Other than that, you need to revert all of the changes you made. Doing this manually would be:
1. Remove the nagiosramdisk directory:
2. Open
/usr/local/nagios/etc/nagios.cfg and change the lines below from this:
Code: Select all
service_perfdata_file=/var/nagiosramdisk/service-perfdata
host_perfdata_file=/var/nagiosramdisk/host-perfdata
check_result_path=/var/nagiosramdisk/spool/checkresults
object_cache_file=/var/nagiosramdisk/objects.cache
status_file=/var/nagiosramdisk/status.dat
temp_path=/var/nagiosramdisk/tmp
to this:
Code: Select all
service_perfdata_file=/usr/local/nagios/var/service-perfdata
host_perfdata_file=/usr/local/nagios/var/host-perfdata
check_result_path=/usr/local/nagios/var/spool/checkresults
object_cache_file=/usr/local/nagios/var/objects.cache
status_file=/usr/local/nagios/var/status.dat
temp_path=/tmp
3. Open the "
/usr/local/nrdp/server/config.inc.php" and change this:
Code: Select all
$cfg["check_results_dir"]="/var/nagiosramdisk/spool/checkresults";
to this:
Code: Select all
$cfg["check_results_dir"]="/usr/local/nagios/var/spool/checkresults";
4. Open the "
/usr/local/nagiosxi/html/config.inc.php" and change this:
Code: Select all
$cfg['xidpe_dir'] = '/var/nagiosramdisk/spool/xidpe/';
$cfg['perfdata_spool'] = '/var/nagiosramdisk/spool/perfdata/';
to this:
Code: Select all
$cfg['xidpe_dir'] = '/usr/local/nagios/var/spool/xidpe/';
$cfg['perfdata_spool'] = '/usr/local/nagios/var/spool/perfdata/';
5. Open the "
/usr/local/nagios/etc/pnp/npcd.cfg" and change this:
Code: Select all
perfdata_spool_dir = /var/nagiosramdisk/spool/perfdata/
to this:
Code: Select all
perfdata_spool_dir = /usr/local/nagios/var/spool/perfdata/
6. Open the "
/usr/local/nagiosmobile/include.inc.php" and change this:
Code: Select all
STATUS_FILE = "/var/nagiosramdisk/status.dat";
$OBJECTS_FILE = "/var/nagiosramdisk/objects.cache";
to this:
Code: Select all
$STATUS_FILE = "/usr/local/nagios/var/status.dat";
$OBJECTS_FILE = "/usr/local/nagios/var/objects.cache";
7. Restart services:
Code: Select all
service nagios restart
service httpd restart
service npcd restart
8. Go to the CCM->Commands, type "perfdata-file-bulk" in the search bar, and hit "Enter".
Modify the "
process-host-perfdata-file-bulk" command so that it looks like this:
Code: Select all
/bin/mv /usr/local/nagios/var/host-perfdata /usr/local/nagios/var/spool/xidpe/$TIMET$.perfdata.host
Save.
Modify the "
process-service-perfdata-file-bulk" command so that it looks like this:
Code: Select all
/bin/mv /usr/local/nagios/var/service-perfdata /usr/local/nagios/var/spool/xidpe/$TIMET$.perfdata.service
Save. Apply Configuration.
You can check if you were able to make all of the necessary changes by running:
Code: Select all
watch -n 1 "ls /usr/local/nagios/var/spool/xidpe | wc -l"
and
Code: Select all
watch -n 1 "ls /usr/local/nagios/var/spool/perfdata | wc -l"
Wait for a few minutes after running each command, and make sure the numbers are changing to 0 once in a while (the perfdata is being processed).
You can exit the command by pressing Ctrl+c.
Let us know if this helped.