Support for Nagios products and services
https://support.nagios.com/forum/
Code: Select all
###############################################################################
# COMMANDS.CFG - SAMPLE COMMAND DEFINITIONS FOR NAGIOS 4.0.1
#
#
# NOTES: This config file provides you with some example command definitions
# that you can reference in host, service, and contact definitions.
#
# You don't need to keep commands in a separate file from your other
# object definitions. This has been done just to make things easier to
# understand.
#
###############################################################################
################################################################################
#
# SAMPLE NOTIFICATION COMMANDS
#
# These are some example notification commands. They may or may not work on
# your system without modification. As an example, some systems will require
# you to use "/usr/bin/mailx" instead of "/usr/bin/mail" in the commands below.
#
################################################################################
# 'notify-host-by-email' command definition
define command{
command_name notify-host-by-email
command_line /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\nHost: $HOSTNAME$\nState: $HOSTSTATE$\nAddress: $HOSTADDRESS$\nInfo: $HOSTOUTPUT$\n\nDate/Time: $LONGDATETIME$\n" | /bin/mai
l -s "** $NOTIFICATIONTYPE$ Host Alert: $HOSTNAME$ is $HOSTSTATE$ **" $CONTACTEMAIL$
}
# 'notify-service-by-email' command definition
define command{
command_name notify-service-by-email
command_line /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\n\nService: $SERVICEDESC$\nHost: $HOSTALIAS$\nAddress: $HOSTADDRESS$\nState: $SERVICESTATE$\n\nDate/Time: $LONGDATETIME$\n\n
Additional Info:\n\n$SERVICEOUTPUT$\n" | /bin/mail -s "** $NOTIFICATIONTYPE$ Service Alert: $HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$ **" $CONTACTEMAIL$
}
################################################################################
#
# UPS SNMP COMMANDS
#
################################################################################
# 'snmp_ups_stat' command definition
define command{
command_name snmp_ups_stat
command_line $USER1$/check_snmp -H $HOSTADDRESS$ -C $ARG1$ -o .1.3.6.1.4.1.318.1.1.1.2.2.3.0 -w 3 -c 4 -l 'Battery LifeTime'
}
# 'snmp_ups_load' command definition
define command{
command_name snmp_ups_load
command_line $USER1$/check_snmp -H $HOSTADDRESS$ -C $ARG1$ -o .1.3.6.1.4.1.318.1.1.1.4.2.3.0 -w 60 -c 90 -l 'Output Load' -u '%'
}
# 'snmp_ups_temp' command definition
define command{
command_name snmp_ups_temp
command_line $USER1$/check_snmp -H $HOSTADDRESS$ -C $ARG1$ -o .1.3.6.1.4.1.318.1.1.1.2.2.2.0 -w 33 -c 40 -l 'internal Temperature' -u 'Grad Celsius'
}
# 'snmp_ups_current' command definition
define command{
command_name snmp_ups_current
command_line $USER1$/check_snmp -H $HOSTADDRESS$ -C $ARG1$ -o .1.3.6.1.4.1.318.1.1.1.4.2.4.0 -w 30 -c 50 -l 'Output Current' -u 'Ampere 3~'
}
################################################################################
#
# SAMPLE HOST CHECK COMMANDS
#
################################################################################
# This command checks to see if a host is "alive" by pinging it
# The check must result in a 100% packet loss or 5 second (5000ms) round trip
# average time to produce a critical error.
# Note: Five ICMP echo packets are sent (determined by the '-p 5' argument)
# 'check-host-alive' command definition
define command{
command_name check-host-alive
command_line $USER1$/check_ping -H $HOSTADDRESS$ -w 3000.0,80% -c 5000.0,100% -p 5
}
################################################################################
#
# SAMPLE SERVICE CHECK COMMANDS
#
# These are some example service check commands. They may or may not work on
# your system, as they must be modified for your plugins. See the HTML
# documentation on the plugins for examples of how to configure command definitions.
#
# NOTE: The following 'check_local_...' functions are designed to monitor
# various metrics on the host that Nagios is running on (i.e. this one).
################################################################################
# 'check_asg_red_state' command definition
define command{
command_name check_asg_red_state
command_line $USER1$/check_asg_red_state.pl -H $HOSTADDRESS$ -R $_HOSTREDID$
}
# 'check_local_disk' command definition
define command{
command_name check_local_disk
command_line $USER1$/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$
}
# 'check_local_load' command definition
define command{
command_name check_local_load
command_line $USER1$/check_load -w $ARG1$ -c $ARG2$
}
# 'check_local_procs' command definition
define command{
command_name check_local_procs
command_line $USER1$/check_procs -w $ARG1$ -c $ARG2$ -s $ARG3$
}
# 'check_local_users' command definition
define command{
command_name check_local_users
command_line $USER1$/check_users -w $ARG1$ -c $ARG2$
}
# 'check_local_swap' command definition
define command{
command_name check_local_swap
command_line $USER1$/check_swap -w $ARG1$ -c $ARG2$
}
# 'check_local_mrtgtraf' command definition
define command{
command_name check_local_mrtgtraf
command_line $USER1$/check_mrtgtraf -F $ARG1$ -a $ARG2$ -w $ARG3$ -c $ARG4$ -e $ARG5$
}
################################################################################
# NOTE: The following 'check_...' commands are used to monitor services on
# both local and remote hosts.
################################################################################
# 'check_ftp' command definition
define command{
command_name check_ftp
command_line $USER1$/check_ftp -H $HOSTADDRESS$ $ARG1$
}
define command{
command_name check_snmp
command_line $USER1$/check_snmp -H $HOSTADDRESS$ $ARG1$
}
# 'check_http' command definition
define command{
command_name check_http
command_line $USER1$/check_http -I $HOSTADDRESS$ $ARG1$
}
# 'check_ssh' command definition
define command{
command_name check_ssh
command_line $USER1$/check_ssh $ARG1$ $HOSTADDRESS$
}
# 'check_dhcp' command definition
define command{
command_name check_dhcp
command_line $USER1$/check_dhcp $ARG1$
}
# 'check_ping' command definition
define command{
command_name check_ping
command_line $USER1$/check_ping -H $HOSTADDRESS$ -w $ARG1$ -c $ARG2$ -p 5
}
# 'check_pop' command definition
define command{
command_name check_pop
command_line $USER1$/check_pop -H $HOSTADDRESS$ $ARG1$
}
# 'check_imap' command definition
define command{
command_name check_imap
command_line $USER1$/check_imap -H $HOSTADDRESS$ $ARG1$
}
# 'check_smtp' command definition
define command{
command_name check_smtp
command_line $USER1$/check_smtp -H $HOSTADDRESS$ $ARG1$
}
# 'check_tcp' command definition
define command{
command_name check_tcp
command_line $USER1$/check_tcp -H $HOSTADDRESS$ -p $ARG1$ $ARG2$
}
# 'check_udp' command definition
define command{
command_name check_udp
command_line $USER1$/check_udp -H $HOSTADDRESS$ -p $ARG1$ $ARG2$
}
# 'check_nt' command definition
define command{
command_name check_nt
command_line $USER1$/check_nt -H $HOSTADDRESS$ -p 12489 -v $ARG1$ $ARG2$
}
################################################################################
#
# Printer SNMP COMMANDS
#
################################################################################
# 'check_hpjd' command definition
define command{
command_name check_hpjd
command_line $USER1$/check_hpjd -H $HOSTADDRESS$ $ARG1$
}
# 'check_snmp_printer' command definition # NEW LINE 7/18/15 jah
define command{
command_name check_snmp_printer
command_line $USER1$/check_snmp_printer -H $HOSTADDRESS$ -C $ARG1$ -x $ARG2 -w $ARG3$ -c $ARG4$
}
# 'check_hpjd_new' command definition # NEW LINE 7/18/15 jah
define command{
command_name check_hpjd_new
command_line php /usr/local/nagios/libexec/check_hpjd_new.php $HOSTADDRESS$ public 10 5
}
define command {
command_name check_snmp_printer_consummables
command_line $USER1$/check_snmp_printer -H $HOSTADDRESS$ -C $ARG1$ -t consummable -o $ARG3$ -w $ARG4$ -c $ARG5$
}
define command {
command_name check_snmp_printer_page
command_line $USER1$/check_snmp_printer -H $HOSTADDRESS$ -C $ARG1$ -t page
}
################################################################################
#
# SAMPLE PERFORMANCE DATA COMMANDS
#
# These are sample performance data commands that can be used to send performance
# data output to two text files (one for hosts, another for services). If you
# plan on simply writing performance data out to a file, consider using the
# host_perfdata_file and service_perfdata_file options in the main config file.
#
################################################################################
# 'process-host-perfdata' command definition
define command{
command_name process-host-perfdata
command_line /usr/bin/printf "%b" "$LASTHOSTCHECK$\t$HOSTNAME$\t$HOSTSTATE$\t$HOSTATTEMPT$\t$HOSTSTATETYPE$\t$HOSTEXECUTIONTIME$\t$HOSTOUTPUT$\t$HOSTPERFDATA$\n" >> /usr/local/nagios/var/host-perfdata.out
}
# 'process-service-perfdata' command definition
define command{
command_name process-service-perfdata
command_line /usr/bin/printf "%b" "$LASTSERVICECHECK$\t$HOSTNAME$\t$SERVICEDESC$\t$SERVICESTATE$\t$SERVICEATTEMPT$\t$SERVICESTATETYPE$\t$SERVICEEXECUTIONTIME$\t$SERVICELATENCY$\t$SERVICEOUTPUT$\t$SERVICEPERFDATA$\n" >>
/usr/local/nagios/var/service-perfdata.out
}
###############################################################################
#
# EXCHANGE COMMANDS
#
#
#
###############################################################################
define command{
command_name check_db
command_line $USER1$/check_nrpe -H $HOSTADDRESS$ -c check_db
}