Nagios Support Forum

@ cdienger

FYI, Display_Name we using as free text field, writing all the detail related to that link as below

Host__Name ,, Service____Description ,, Display_Name
paris-7600-1 ,, GigabitEthernet2 Status ,, connect to London Provider:XYZ , route:abc-pqr , cable:terrestrial , CID:155GE-5153-X786
paris-7600-1 ,, GigabitEthernet2 Bandwidth ,, CID:155GE-5153-X786 , AVG traffic less than 200Mb since its backup-link
paris-7600-1 ,, GigabitEthernet2 Latency ,, CID:155GE-5153-X786 , Min-Avg-Max rtt is 10-12-15ms

the below is not directly related to this Post/Topic, just FYI only
https://support.nagios.com/forum/viewto ... 16&t=37383

please read last thread of this
https://support.nagios.com/forum/viewto ... 16&t=30414

You many need to find a different field depending on your current config. See http://docs.nagvis.org/1.9/en_US/hover_templates.html for options available in Nagvis. [obj_notes] pulls the value that is set on the host/service under its Misc Settings tab.