Page 2 of 3

Re: Configuration Error

Posted: Thu Mar 07, 2013 11:43 am
by estherpeddi
I do not find crplivdba2 in the list, please see attached screen shot.

Re: Configuration Error

Posted: Thu Mar 07, 2013 11:48 am
by abrist
What is the "sync status" of the host in question? You may have to write out your configs and fix the problem before applying.

Re: Configuration Error

Posted: Thu Mar 07, 2013 11:50 am
by sreinhardt
Is this device part of any templates or hostgroups, as mentioned before you would likely have to modify those separately. Additionally, some configuration options that are configured via the other two, may not show under an individual hosts settings. This is intentional, as going through the configs and finding all relations would be very intensive for a system. To sum it up, if this host is applied to a host group or template via the HG\template screen, it will not necessarily show as having additional options configured directly under the host options. Please check all hostgroups and templates that are applied to this host, and be sure that none have it listed as a parent.

Re: Configuration Error

Posted: Thu Mar 07, 2013 11:52 am
by estherpeddi
Shows "Synced to File"

Re: Configuration Error

Posted: Thu Mar 07, 2013 11:52 am
by slansing
In addition to what is above, from the command line on your nagios server do you see the host in the follow directory? /usr/local/nagios/etc/hosts/?

Re: Configuration Error

Posted: Fri Mar 08, 2013 10:14 am
by estherpeddi
How can I check that?

Re: Configuration Error

Posted: Fri Mar 08, 2013 11:16 am
by abrist

Code: Select all

ls -la /usr/local/nagios/etc/hosts | grep crplivdba2

Re: Configuration Error

Posted: Fri Mar 08, 2013 12:17 pm
by estherpeddi
Thanks! yes i see the host listed

Re: Configuration Error

Posted: Fri Mar 08, 2013 12:29 pm
by estherpeddi
Can i delete the crplivdba2.cfg file?

Re: Configuration Error

Posted: Fri Mar 08, 2013 12:35 pm
by sreinhardt
You can... but as soon as you write, verify, or apply any change within XI it will write that file back again. It needs to be resolved within ccm\xi. Why don't you send us your latest bad snapshot in a pm, to myself or abrist. This way we can look through and help you identify what to modify. Admin -> Config Snapshots -> download the latest bad one(in red).