Support for Nagios products and services
https://support.nagios.com/forum/
Code: Select all
su nagiosCode: Select all
[1368118882.069514] [016.1] [pid=1078] Handling check result for service 'CPU Load NRPE' on host 'mortalla'...
[1368118882.069525] [001.0] [pid=1078] handle_async_service_check_result()
[1368118882.069535] [016.0] [pid=1078] ** Handling check result for service 'CPU Load NRPE' on host 'mortalla'...
[1368118882.069545] [016.1] [pid=1078] HOST: mortalla, SERVICE: CPU Load NRPE, CHECK TYPE: Active, OPTIONS: 0, SCHEDULED: Yes, RESCHEDULE: Yes, EXITED OK: Yes, RETURN CODE: 3, OUTPUT: \nNRPE Plugin for Nagios\nCopyright (c) 1999-2008 Ethan Galstad ([email protected])\nVersion: 2.12\nLast Modified: 03-10-2008\nLicense: GPL v2 with exemptions (-l for more info)\nSSL/TLS Available: Anonymous DH Mode, OpenSSL 0.9.6 or higher required\n\nUsage: check_nrpe -H <host> [-n] [-u] [-p <port>] [-t <timeout>] [-c <command>] [-a <arglist...>]\n\nOptions:\n -n = Do no use SSL\n -u = Make socket timeouts return an UNKNOWN state instead of CRITICAL\n <host> = The address of the host running the NRPE daemon\n [port] = The port on which the daemon is running (default=5666)\n [timeout] = Number of seconds before connection times out (default=10)\n [command] = The name of the command that the remote daemon should run\n [arglist] = Optional arguments that should be passed to the command. Multiple\n arguments should be separated by a space. If provided, this must be\n the last option supplied on the command line.\n -h,--help Print this short help.\n -l,--license Print licensing information.\n -n,--no-ssl Do not initial an ssl handshake with the server, talk in plaintext.\n\nNote:\nThis plugin requires that you have the NRPE daemon running on the remote host.\nYou must also have configured the daemon to associate a specific plugin command\nwith the [command] option you are specifying here. Upon receipt of the\n[command] argument, the NRPE daemon will run the appropriate plugin command and\nsend the plugin output and return code back to *this* plugin. This allows you\nto execute plugins on remote hosts and 'fake' the results to make Nagios think\nthe plugin is being run locally.\n\n
[1368118882.069706] [016.2] [pid=1078] Parsing check output...
[1368118882.069725] [016.2] [pid=1078] Short Output: (No output returned from plugin)
[1368118882.069735] [016.2] [pid=1078] Long Output: NRPE Plugin for Nagios\nCopyright (c) 1999-2008 Ethan Galstad ([email protected])\nVersion: 2.12\nLast Modified: 03-10-2008\nLicense: GPL v2 with exemptions (-l for more info)\nSSL/TLS Available: Anonymous DH Mode, OpenSSL 0.9.6 or higher required\n\nUsage: check_nrpe -H <host> [-n] [-u] [-p <port>] [-t <timeout>] [-c <command>] [-a <arglist...>]\n\nOptions:\n -n = Do no use SSL\n -u = Make socket timeouts return an UNKNOWN state instead of CRITICAL\n <host> = The address of the host running the NRPE daemon\n [port] = The port on which the daemon is running (default=5666)\n [timeout] = Number of seconds before connection times out (default=10)\n [command] = The name of the command that the remote daemon should run\n [arglist] = Optional arguments that should be passed to the command. Multiple\n arguments should be separated by a space. If provided, this must be\n the last option supplied on the command line.\n -h,--help Print this short help.\n -l,--license Print licensing information.\n -n,--no-ssl Do not initial an ssl handshake with the server, talk in plaintext.\n\nNote:\nThis plugin requires that you have the NRPE daemon running on the remote host.\nYou must also have configured the daemon to associate a specific plugin command\nwith the [command] option you are specifying here. Upon receipt of the\n[command] argument, the NRPE daemon will run the appropriate plugin command and\nsend the plugin output and return code back to *this* plugin. This allows you\nto execute plugins on remote hosts and 'fake' the results to make Nagios think\nthe plugin is being run locally.\n\n
[1368118882.069750] [016.2] [pid=1078] Perf Data: NULL
[1368118882.069760] [016.2] [pid=1078] ST: HARD CA: 4 MA: 4 CS: 3 LS: 3 LHS: 3
[1368118882.069772] [016.1] [pid=1078] Service is in a non-OK state!
[1368118882.069906] [016.1] [pid=1078] Host is currently UP, so we'll recheck its state to make sure...
[1368118882.069942] [016.1] [pid=1078] * Using last known host state: 0
[1368118882.069954] [016.1] [pid=1078] Current/Max Attempt(s): 4/4
[1368118882.069964] [016.1] [pid=1078] Service has reached max number of rechecks, so we'll handle the error...
[1368118882.069974] [001.0] [pid=1078] check_for_service_flapping()
[1368118882.069983] [016.1] [pid=1078] Checking service 'CPU Load NRPE' on host 'mortalla' for flapping...
[1368118882.069995] [016.2] [pid=1078] LFT=5.00, HFT=20.00, CPC=0.00, PSC=0.00%
[1368118882.070017] [016.1] [pid=1078] Service is not flapping (0.00% state change).
[1368118882.070030] [001.0] [pid=1078] check_for_host_flapping()
[1368118882.070039] [016.1] [pid=1078] Checking host 'mortalla' for flapping...
[1368118882.070058] [016.2] [pid=1078] LFT=5.00, HFT=20.00, CPC=0.00, PSC=0.00%
[1368118882.070078] [016.1] [pid=1078] Host is not flapping (0.00% state change).
[1368118882.070091] [001.0] [pid=1078] service_notification()
[1368118882.070130] [032.0] [pid=1078] ** Service Notification Attempt ** Host: 'mortalla', Service: 'CPU Load NRPE', Type: 0, Options: 0, Current State: 3, Last Notification: Wed May 8 06:22:32 2013
[1368118882.070148] [001.0] [pid=1078] check_service_notification_viability()
[1368118882.070158] [001.0] [pid=1078] check_time_against_period()
[1368118882.070188] [001.0] [pid=1078] check_service_dependencies()
[1368118882.070206] [001.0] [pid=1078] check_host_dependencies()
[1368118882.070217] [032.1] [pid=1078] We shouldn't re-notify contacts about this service problem.
[1368118882.070243] [032.0] [pid=1078] Notification viability test failed. No notification will be sent out.
[1368118882.070254] [001.0] [pid=1078] obsessive_compulsive_service_check_processor()
[1368118882.070274] [016.1] [pid=1078] Rescheduling next check of service at Thu May 9 11:06:15 2013
[1368118882.070286] [001.0] [pid=1078] get_next_valid_time()
[1368118882.070295] [001.0] [pid=1078] check_time_against_period()
[1368118882.070314] [001.0] [pid=1078] schedule_service_check()
[1368118882.070334] [016.0] [pid=1078] Scheduling a non-forced, active check of service 'CPU Load NRPE' on host 'mortalla' @ Thu May 9 11:06:15 2013
[1368118882.070350] [016.2] [pid=1078] Scheduling new service check event.Code: Select all
[1368118822.141476] [016.1] [pid=1078] Handling check result for service 'Check Users' on host 'mortalla'...
[1368118822.141488] [001.0] [pid=1078] handle_async_service_check_result()
[1368118822.141498] [016.0] [pid=1078] ** Handling check result for service 'Check Users' on host 'mortalla'...
[1368118822.141508] [016.1] [pid=1078] HOST: mortalla, SERVICE: Check Users, CHECK TYPE: Active, OPTIONS: 0, SCHEDULED: Yes, RESCHEDULE: Yes, EXITED OK: Yes, RETURN CODE: 3, OUTPUT: \nNRPE Plugin for Nagios\nCopyright (c) 1999-2008 Ethan Galstad ([email protected])\nVersion: 2.12\nLast Modified: 03-10-2008\nLicense: GPL v2 with exemptions (-l for more info)\nSSL/TLS Available: Anonymous DH Mode, OpenSSL 0.9.6 or higher required\n\nUsage: check_nrpe -H <host> [-n] [-u] [-p <port>] [-t <timeout>] [-c <command>] [-a <arglist...>]\n\nOptions:\n -n = Do no use SSL\n -u = Make socket timeouts return an UNKNOWN state instead of CRITICAL\n <host> = The address of the host running the NRPE daemon\n [port] = The port on which the daemon is running (default=5666)\n [timeout] = Number of seconds before connection times out (default=10)\n [command] = The name of the command that the remote daemon should run\n [arglist] = Optional arguments that should be passed to the command. Multiple\n arguments should be separated by a space. If provided, this must be\n the last option supplied on the command line.\n -h,--help Print this short help.\n -l,--license Print licensing information.\n -n,--no-ssl Do not initial an ssl handshake with the server, talk in plaintext.\n\nNote:\nThis plugin requires that you have the NRPE daemon running on the remote host.\nYou must also have configured the daemon to associate a specific plugin command\nwith the [command] option you are specifying here. Upon receipt of the\n[command] argument, the NRPE daemon will run the appropriate plugin command and\nsend the plugin output and return code back to *this* plugin. This allows you\nto execute plugins on remote hosts and 'fake' the results to make Nagios think\nthe plugin is being run locally.\n\n
[1368118822.141824] [016.2] [pid=1078] Parsing check output...
[1368118822.141853] [016.2] [pid=1078] Short Output: (No output returned from plugin)
[1368118822.141864] [016.2] [pid=1078] Long Output: NRPE Plugin for Nagios\nCopyright (c) 1999-2008 Ethan Galstad ([email protected])\nVersion: 2.12\nLast Modified: 03-10-2008\nLicense: GPL v2 with exemptions (-l for more info)\nSSL/TLS Available: Anonymous DH Mode, OpenSSL 0.9.6 or higher required\n\nUsage: check_nrpe -H <host> [-n] [-u] [-p <port>] [-t <timeout>] [-c <command>] [-a <arglist...>]\n\nOptions:\n -n = Do no use SSL\n -u = Make socket timeouts return an UNKNOWN state instead of CRITICAL\n <host> = The address of the host running the NRPE daemon\n [port] = The port on which the daemon is running (default=5666)\n [timeout] = Number of seconds before connection times out (default=10)\n [command] = The name of the command that the remote daemon should run\n [arglist] = Optional arguments that should be passed to the command. Multiple\n arguments should be separated by a space. If provided, this must be\n the last option supplied on the command line.\n -h,--help Print this short help.\n -l,--license Print licensing information.\n -n,--no-ssl Do not initial an ssl handshake with the server, talk in plaintext.\n\nNote:\nThis plugin requires that you have the NRPE daemon running on the remote host.\nYou must also have configured the daemon to associate a specific plugin command\nwith the [command] option you are specifying here. Upon receipt of the\n[command] argument, the NRPE daemon will run the appropriate plugin command and\nsend the plugin output and return code back to *this* plugin. This allows you\nto execute plugins on remote hosts and 'fake' the results to make Nagios think\nthe plugin is being run locally.\n\n
[1368118822.141879] [016.2] [pid=1078] Perf Data: NULL
[1368118822.141889] [016.2] [pid=1078] ST: HARD CA: 4 MA: 4 CS: 3 LS: 3 LHS: 3
[1368118822.141902] [016.1] [pid=1078] Service is in a non-OK state!
[1368118822.141911] [016.1] [pid=1078] Host is currently UP, so we'll recheck its state to make sure...
[1368118822.141920] [016.1] [pid=1078] * Using last known host state: 0
[1368118822.141930] [016.1] [pid=1078] Current/Max Attempt(s): 4/4
[1368118822.141940] [016.1] [pid=1078] Service has reached max number of rechecks, so we'll handle the error...
[1368118822.141950] [001.0] [pid=1078] check_for_service_flapping()
[1368118822.141975] [016.1] [pid=1078] Checking service 'Check Users' on host 'mortalla' for flapping...
[1368118822.141988] [016.2] [pid=1078] LFT=5.00, HFT=20.00, CPC=0.00, PSC=0.00%
[1368118822.142012] [016.1] [pid=1078] Service is not flapping (0.00% state change).
[1368118822.142027] [001.0] [pid=1078] check_for_host_flapping()
[1368118822.142036] [016.1] [pid=1078] Checking host 'mortalla' for flapping...
[1368118822.142053] [016.2] [pid=1078] LFT=5.00, HFT=20.00, CPC=0.00, PSC=0.00%
[1368118822.142073] [016.1] [pid=1078] Host is not flapping (0.00% state change).
[1368118822.142086] [001.0] [pid=1078] service_notification()
[1368118822.142118] [032.0] [pid=1078] ** Service Notification Attempt ** Host: 'mortalla', Service: 'Check Users', Type: 0, Options: 0, Current State: 3, Last Notification: Wed May 8 08:54:25 2013
[1368118822.142134] [001.0] [pid=1078] check_service_notification_viability()Code: Select all
su -s /bin/bash nagiosCode: Select all
cat /etc/passwd | grep nagios