Nagios Support Forum

Support for Nagios products and services
https://support.nagios.com/forum/

UPS battery lifetime alert

https://support.nagios.com/forum/viewtopic.php?t=40955

Page 5 of 6

Re: UPS battery lifetime alert

Posted: Tue Nov 08, 2016 5:02 pm
by rkennedy
No, this replaces the plugin you were previously using as @tgrtjake modified it for you.

Re: UPS battery lifetime alert

Posted: Tue Nov 08, 2016 6:11 pm
by sa77if
rkennedy wrote:No, this replaces the plugin you were previously using as @tgrtjake modified it for you.
i am sorry, bare with me plz, where do i have to use this code? i am new on nagios

Code: Select all

#!/usr/local/groundwork/bin/perl

#    Copyright (C) 2004 Altinity Limited
#    E: [email protected]    W: http://www.altinity.com/
#    Modified by [email protected]
#
#    This program is free software; you can redistribute it and/or modify
#    it under the terms of the GNU General Public License as published by
#    the Free Software Foundation; either version 2 of the License, or
#    (at your option) any later version.
#
#    This program is distributed in the hope that it will be useful,
#    but WITHOUT ANY WARRANTY; without even the implied warranty of
#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.    See the
#    GNU General Public License for more details.
#
#    You should have received a copy of the GNU General Public License
#    along with this program; if not, write to the Free Software
#    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA    02111-1307    USA

use Net::SNMP;
use Getopt::Std;

$script    = "check_ups_pow.pl";
$script_version = "1.0";

$metric = 1;

$ipaddress = "192.168.1.1";     # default IP address, if none supplied
$version = "1";                 # SNMP version
$timeout = 2;                           # SNMP query timeout
# $warning = 100;
# $critical = 150;
$status = 0;
$returnstring = "";
$perfdata = "";

$community = "public";                  # Default community string

$oid_sysDescr = ".1.3.6.1.2.1.1.1.0";
$oid_upstype = ".1.3.6.1.2.1.1.5.0";
#$oid_upstype = ".1.3.6.1.4.1.318.1.1.1.1.1.1.0";
$oid_battery_capacity = ".1.3.6.1.4.1.318.1.1.1.2.2.1.0";
$oid_output_status = ".1.3.6.1.4.1.318.1.1.1.4.1.1.0";
$oid_output_current = ".1.3.6.1.4.1.318.1.1.1.4.2.4.0";
$oid_output_load = ".1.3.6.1.4.1.318.1.1.1.4.2.3.0";
$oid_temperature = ".1.3.6.1.4.1.318.1.1.1.2.2.2.0";

$upstype = "";
$battery_capacity = 0;
$output_status = 0;
$output_current =0;
$output_load = 0;
$temperature = 0;


# Do we have enough information?
if (@ARGV < 1) {
     print "Too few arguments\n";
     usage();
}

getopts("h:H:C:w:c:");
if ($opt_h){
    usage();
    exit(0);
}
if ($opt_H){
    $hostname = $opt_H;
}
else {
    print "No hostname specified\n";
    usage();
}
if ($opt_C){
    $community = $opt_C;
}
else {
}



# Create the SNMP session
my ($s, $e) = Net::SNMP->session(
     -community  =>  $community,
     -hostname   =>  $hostname,
     -version    =>  $version,
     -timeout    =>  $timeout,
);

main();

# Close the session
$s->close();

if ($status == 0){
    print "Status is OK -- $returnstring|$perfdata\n";
    # print "$returnstring\n";
}
elsif ($status == 1){
    print "Status is at WARNING -- $returnstring|$perfdata\n";
}
elsif ($status == 2){
    print "Status is at CRITICAL -- $returnstring|$perfdata\n";
}
else{
    print "Problem with monitoring plugin. No response from SNMP agent.\n";
}

exit $status;


####################################################################
# This is where we gather data via SNMP and return results         #
####################################################################

sub main {

        #######################################################

    if (!defined($s->get_request($oid_upstype))) {
        if (!defined($s->get_request($oid_sysDescr))) {
            $returnstring = "SNMP agent not responding";
            $status = 1;
            return 1;
        }
        else {
            $returnstring = "SNMP OID does not exist";
            $status = 1;
            return 1;
        }
    }
     foreach ($s->var_bind_names()) {
         $upstype = $s->var_bind_list()->{$_};
    }

    #######################################################

    if (!defined($s->get_request($oid_battery_capacity))) {
        if (!defined($s->get_request($oid_sysDescr))) {
            $returnstring = "SNMP agent not responding";
            $status = 1;
            return 1;
        }
        else {
            $returnstring = "SNMP OID does not exist";
            $status = 1;
            return 1;
        }
    }
     foreach ($s->var_bind_names()) {
         $battery_capacity = $s->var_bind_list()->{$_};
    }

    #######################################################

    if (!defined($s->get_request($oid_output_status))) {
        if (!defined($s->get_request($oid_sysDescr))) {
            $returnstring = "SNMP agent not responding";
            $status = 1;
            return 1;
        }
        else {
            $returnstring = "SNMP OID does not exist";
            $status = 1;
            return 1;
        }
    }
     foreach ($s->var_bind_names()) {
         $output_status = $s->var_bind_list()->{$_};
    }
    #######################################################

    if (!defined($s->get_request($oid_output_current))) {
        if (!defined($s->get_request($oid_sysDescr))) {
            $returnstring = "SNMP agent not responding";
            $status = 1;
            return 1;
        }
        else {
            $returnstring = "SNMP OID does not exist";
            $status = 1;
            return 1;
        }
    }
     foreach ($s->var_bind_names()) {
         $output_current = $s->var_bind_list()->{$_};
    }
    #######################################################

    if (!defined($s->get_request($oid_output_load))) {
        if (!defined($s->get_request($oid_sysDescr))) {
            $returnstring = "SNMP agent not responding";
            $status = 1;
            return 1;
        }
        else {
            $returnstring = "SNMP OID does not exist";
            $status = 1;
            return 1;
        }
    }
     foreach ($s->var_bind_names()) {
         $output_load = $s->var_bind_list()->{$_};
    }
    #######################################################

    if (!defined($s->get_request($oid_temperature))) {
        if (!defined($s->get_request($oid_sysDescr))) {
            $returnstring = "SNMP agent not responding";
            $status = 1;
            return 1;
        }
        else {
            $returnstring = "SNMP OID does not exist";
            $status = 1;
            return 1;
        }
    }
     foreach ($s->var_bind_names()) {
         $temperature = $s->var_bind_list()->{$_};
    }

$temp = $temperature * 1.8 + 32;
    #######################################################

    $returnstring = "";
    $status = 0;
    $perfdata = "";

#    if (defined($oid_upstype)) {
#        $returnstring = "$upstype - ";
#    }

    if ($battery_capacity < 25) {
        $returnstring = $returnstring . "BATTERY AT $battery_capacity% -- ";
        $status = 2;
    }
    elsif ($battery_capacity < 50) {
        $returnstring = $returnstring . "BATTERY AT $battery_capacity% -- ";
        $status = 1 if ( $status != 2 );
    }
    elsif ($battery_capacity <= 100) {
        $returnstring = $returnstring . "BATTERY AT $battery_capacity% -- ";
    }
    else {
        $returnstring = $returnstring . "BATTERY CAPACITY UNKNOWN! -- ";
        $status = 3 if ( ( $status != 2 ) && ( $status != 1 ) );
    }


    if ($output_status eq "2"){
        $returnstring = $returnstring . "UPS IS NORMAL -- ";
    }
    elsif ($output_status eq "3"){
        $returnstring = $returnstring . "UPS IS ON BATTERY! -- ";
        $status = 1 if ( $status != 2 );
    }
    elsif ($output_status eq "4"){
        $returnstring = $returnstring . "UPS IS ON SMART BOOST! - ";
        $status = 1 if ( $status != 2 );
    }
    elsif ($output_status eq "5"){
        $returnstring = $returnstring . "UPS IS ON TIMED SLEEP! -- ";
        $status = 1 if ( $status != 2 );
    }
    elsif ($output_status eq "6"){
        $returnstring = $returnstring . "UPS IS ON SOFTWARE BYPASS! -- ";
        $status = 1 if ( $status != 2 );
    }
    elsif ($output_status eq "7"){
        $returnstring = $returnstring . "UPS IS OFF! -- ";
        $status = 1 if ( $status != 2 );
    }
    elsif ($output_status eq "8"){
        $returnstring = $returnstring . "UPS IS REBOOTING! -- ";
        $status = 1 if ( $status != 2 );
    }
    elsif ($output_status eq "9"){
        $returnstring = $returnstring . "UPS IS ON SWITCHED BYPASS! -- ";
        $status = 1 if ( $status != 2 );
    }
    elsif ($output_status eq "10"){
        $returnstring = $returnstring . "UPS IS ON HARDWARE FAILURE BYPASS! -- ";
        $status = 1 if ( $status != 2 );
    }
    elsif ($output_status eq "11"){
        $returnstring = $returnstring . "UPS IS SLEEPING UNTIL POWER RETURN! -- ";
        $status = 1 if ( $status != 2 );
    }
    elsif ($output_status eq "12"){
        $returnstring = $returnstring . "UPS IS ON SMART TRIM! -- ";
        $status = 1 if ( $status != 2 );
    }
    elsif ($output_status eq "13"){
        $returnstring = $returnstring . "UPS IS ON ECO MODE! -- ";
        $status = 1 if ( $status != 2 );
    }
    elsif ($output_status eq "14"){
        $returnstring = $returnstring . "UPS IS ON HOT STANDBY! -- ";
        $status = 1 if ( $status != 2 );
    }
    elsif ($output_status eq "15"){
        $returnstring = $returnstring . "UPS IS PERFORMING BATTERY TEST! -- ";
#        $status = 1 if ( $status != 2 );
    }
    elsif ($output_status eq "16"){
        $returnstring = $returnstring . "UPS IS ON EMERGENCY STATIC BYPASS! -- ";
        $status = 1 if ( $status != 2 );
    }
    elsif ($output_status eq "17"){
        $returnstring = $returnstring . "UPS IS ON STATIC BYPASS STANDBY! -- ";
        $status = 1 if ( $status != 2 );
    }
    elsif ($output_status eq "18"){
        $returnstring = $returnstring . "UPS IS ON POWER SAVING MODE! -- ";
        $status = 1 if ( $status != 2 );
    }
    elsif ($output_status eq "19"){
        $returnstring = $returnstring . "UPS IS ON SPOT MODE! -- ";
        $status = 1 if ( $status != 2 );
    }
    elsif ($output_status eq "20"){
        $returnstring = $returnstring . "UPS IS ON ECONVERSION! -- ";
        $status = 1 if ( $status != 2 );
    }
    else {
        $returnstring = $returnstring . "UNKNOWN OUTPUT STATUS! -- ";
        $status = 3 if ( ( $status != 2 ) && ( $status != 1 ) );
    }

    if ($output_load > 90) {
        $returnstring = $returnstring . "OUTPUT LOAD $output_load% -- ";
        $perfdata = $perfdata . "'load'=$output_load ";
        $status = 2;
    }
    elsif ($output_load > 80) {
        $returnstring = $returnstring . "OUTPUT LOAD $output_load% -- ";
        $perfdata = $perfdata . "'load'=$output_load ";
        $status = 1 if ( $status != 2 );
    }
    elsif ($output_load >= 0) {
        $returnstring = $returnstring . "OUTPUT LOAD $output_load% -- ";
        $perfdata = $perfdata . "'load'=$output_load ";
    }
    else {
        $returnstring = $returnstring . "OUTPUT LOAD UNKNOWN! -- ";
        $perfdata = $perfdata . "'load'=NAN ";
        $status = 3 if ( ( $status != 2 ) && ( $status != 1 ) );
    }

    if ($temperature > 93) {
        $returnstring = $returnstring . "INTERNAL TEMP $temp F";
        $perfdata = $perfdata . "'temp'=$temp ";
        $status = 2;
    }
    elsif ($temperature > 89) {
        $returnstring = $returnstring . "INTERNAL TEMP $temp F";
        $perfdata = $perfdata . "'temp'=$temp ";
        $status = 1 if ( $status != 2 );
    }
    elsif ($temperature >= 0) {
        $returnstring = $returnstring . "INTERNAL TEMP $temp F";
        $perfdata = $perfdata . "'temp'=$temp ";
    }
    else {
        $returnstring = $returnstring . "INTERNAL TEMP UNKNOWN!";
        $perfdata = $perfdata . "'temp'=NAN ";
        $status = 3 if ( ( $status != 2 ) && ( $status != 1 ) );
    }

}

####################################################################
# help and usage information                                       #
####################################################################

sub usage {
    print << "USAGE";
-----------------------------------------------------------------
$script v$script_version

Monitors PowerWare UPS via SNMP management card.

Usage: $script -H <hostname> -C <community> [...]

Options: -H     Hostname or IP address
         -C     Community (default is public)

-----------------------------------------------------------------
Copyright 2004 Altinity Limited

This program is free software; you can redistribute it or modify
it under the terms of the GNU General Public License
-----------------------------------------------------------------

USAGE
     exit 1;
}

Re: UPS battery lifetime alert

Posted: Wed Nov 09, 2016 9:13 am
by tgrtjake
This is a perl script so you would need perl installed to use this. In my case it works great. You may or may not like it, but I thought I would suggest it to you to try.

Here's the link for the plugin.
https://exchange.nagios.org/directory/P ... 1451320184

Re: UPS battery lifetime alert

Posted: Wed Nov 09, 2016 11:47 am
by mcapra
Thanks again @tgrtjake :)

@sa77if let us know if you have additional questions.

Re: UPS battery lifetime alert

Posted: Wed Nov 09, 2016 5:30 pm
by sa77if
sa77if wrote:
rkennedy wrote:No, this replaces the plugin you were previously using as @tgrtjake modified it for you.
i am sorry, bare with me plz, where do i have to use this code? i am new on nagios

Code: Select all

#!/usr/local/groundwork/bin/perl

#    Copyright (C) 2004 Altinity Limited
#    E: [email protected]    W: http://www.altinity.com/
#    Modified by [email protected]
#
#    This program is free software; you can redistribute it and/or modify
#    it under the terms of the GNU General Public License as published by
#    the Free Software Foundation; either version 2 of the License, or
#    (at your option) any later version.
#
#    This program is distributed in the hope that it will be useful,
#    but WITHOUT ANY WARRANTY; without even the implied warranty of
#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.    See the
#    GNU General Public License for more details.
#
#    You should have received a copy of the GNU General Public License
#    along with this program; if not, write to the Free Software
#    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA    02111-1307    USA

use Net::SNMP;
use Getopt::Std;

$script    = "check_ups_pow.pl";
$script_version = "1.0";

$metric = 1;

$ipaddress = "192.168.1.1";     # default IP address, if none supplied
$version = "1";                 # SNMP version
$timeout = 2;                           # SNMP query timeout
# $warning = 100;
# $critical = 150;
$status = 0;
$returnstring = "";
$perfdata = "";

$community = "public";                  # Default community string

$oid_sysDescr = ".1.3.6.1.2.1.1.1.0";
$oid_upstype = ".1.3.6.1.2.1.1.5.0";
#$oid_upstype = ".1.3.6.1.4.1.318.1.1.1.1.1.1.0";
$oid_battery_capacity = ".1.3.6.1.4.1.318.1.1.1.2.2.1.0";
$oid_output_status = ".1.3.6.1.4.1.318.1.1.1.4.1.1.0";
$oid_output_current = ".1.3.6.1.4.1.318.1.1.1.4.2.4.0";
$oid_output_load = ".1.3.6.1.4.1.318.1.1.1.4.2.3.0";
$oid_temperature = ".1.3.6.1.4.1.318.1.1.1.2.2.2.0";

$upstype = "";
$battery_capacity = 0;
$output_status = 0;
$output_current =0;
$output_load = 0;
$temperature = 0;


# Do we have enough information?
if (@ARGV < 1) {
     print "Too few arguments\n";
     usage();
}

getopts("h:H:C:w:c:");
if ($opt_h){
    usage();
    exit(0);
}
if ($opt_H){
    $hostname = $opt_H;
}
else {
    print "No hostname specified\n";
    usage();
}
if ($opt_C){
    $community = $opt_C;
}
else {
}



# Create the SNMP session
my ($s, $e) = Net::SNMP->session(
     -community  =>  $community,
     -hostname   =>  $hostname,
     -version    =>  $version,
     -timeout    =>  $timeout,
);

main();

# Close the session
$s->close();

if ($status == 0){
    print "Status is OK -- $returnstring|$perfdata\n";
    # print "$returnstring\n";
}
elsif ($status == 1){
    print "Status is at WARNING -- $returnstring|$perfdata\n";
}
elsif ($status == 2){
    print "Status is at CRITICAL -- $returnstring|$perfdata\n";
}
else{
    print "Problem with monitoring plugin. No response from SNMP agent.\n";
}

exit $status;


####################################################################
# This is where we gather data via SNMP and return results         #
####################################################################

sub main {

        #######################################################

    if (!defined($s->get_request($oid_upstype))) {
        if (!defined($s->get_request($oid_sysDescr))) {
            $returnstring = "SNMP agent not responding";
            $status = 1;
            return 1;
        }
        else {
            $returnstring = "SNMP OID does not exist";
            $status = 1;
            return 1;
        }
    }
     foreach ($s->var_bind_names()) {
         $upstype = $s->var_bind_list()->{$_};
    }

    #######################################################

    if (!defined($s->get_request($oid_battery_capacity))) {
        if (!defined($s->get_request($oid_sysDescr))) {
            $returnstring = "SNMP agent not responding";
            $status = 1;
            return 1;
        }
        else {
            $returnstring = "SNMP OID does not exist";
            $status = 1;
            return 1;
        }
    }
     foreach ($s->var_bind_names()) {
         $battery_capacity = $s->var_bind_list()->{$_};
    }

    #######################################################

    if (!defined($s->get_request($oid_output_status))) {
        if (!defined($s->get_request($oid_sysDescr))) {
            $returnstring = "SNMP agent not responding";
            $status = 1;
            return 1;
        }
        else {
            $returnstring = "SNMP OID does not exist";
            $status = 1;
            return 1;
        }
    }
     foreach ($s->var_bind_names()) {
         $output_status = $s->var_bind_list()->{$_};
    }
    #######################################################

    if (!defined($s->get_request($oid_output_current))) {
        if (!defined($s->get_request($oid_sysDescr))) {
            $returnstring = "SNMP agent not responding";
            $status = 1;
            return 1;
        }
        else {
            $returnstring = "SNMP OID does not exist";
            $status = 1;
            return 1;
        }
    }
     foreach ($s->var_bind_names()) {
         $output_current = $s->var_bind_list()->{$_};
    }
    #######################################################

    if (!defined($s->get_request($oid_output_load))) {
        if (!defined($s->get_request($oid_sysDescr))) {
            $returnstring = "SNMP agent not responding";
            $status = 1;
            return 1;
        }
        else {
            $returnstring = "SNMP OID does not exist";
            $status = 1;
            return 1;
        }
    }
     foreach ($s->var_bind_names()) {
         $output_load = $s->var_bind_list()->{$_};
    }
    #######################################################

    if (!defined($s->get_request($oid_temperature))) {
        if (!defined($s->get_request($oid_sysDescr))) {
            $returnstring = "SNMP agent not responding";
            $status = 1;
            return 1;
        }
        else {
            $returnstring = "SNMP OID does not exist";
            $status = 1;
            return 1;
        }
    }
     foreach ($s->var_bind_names()) {
         $temperature = $s->var_bind_list()->{$_};
    }

$temp = $temperature * 1.8 + 32;
    #######################################################

    $returnstring = "";
    $status = 0;
    $perfdata = "";

#    if (defined($oid_upstype)) {
#        $returnstring = "$upstype - ";
#    }

    if ($battery_capacity < 25) {
        $returnstring = $returnstring . "BATTERY AT $battery_capacity% -- ";
        $status = 2;
    }
    elsif ($battery_capacity < 50) {
        $returnstring = $returnstring . "BATTERY AT $battery_capacity% -- ";
        $status = 1 if ( $status != 2 );
    }
    elsif ($battery_capacity <= 100) {
        $returnstring = $returnstring . "BATTERY AT $battery_capacity% -- ";
    }
    else {
        $returnstring = $returnstring . "BATTERY CAPACITY UNKNOWN! -- ";
        $status = 3 if ( ( $status != 2 ) && ( $status != 1 ) );
    }


    if ($output_status eq "2"){
        $returnstring = $returnstring . "UPS IS NORMAL -- ";
    }
    elsif ($output_status eq "3"){
        $returnstring = $returnstring . "UPS IS ON BATTERY! -- ";
        $status = 1 if ( $status != 2 );
    }
    elsif ($output_status eq "4"){
        $returnstring = $returnstring . "UPS IS ON SMART BOOST! - ";
        $status = 1 if ( $status != 2 );
    }
    elsif ($output_status eq "5"){
        $returnstring = $returnstring . "UPS IS ON TIMED SLEEP! -- ";
        $status = 1 if ( $status != 2 );
    }
    elsif ($output_status eq "6"){
        $returnstring = $returnstring . "UPS IS ON SOFTWARE BYPASS! -- ";
        $status = 1 if ( $status != 2 );
    }
    elsif ($output_status eq "7"){
        $returnstring = $returnstring . "UPS IS OFF! -- ";
        $status = 1 if ( $status != 2 );
    }
    elsif ($output_status eq "8"){
        $returnstring = $returnstring . "UPS IS REBOOTING! -- ";
        $status = 1 if ( $status != 2 );
    }
    elsif ($output_status eq "9"){
        $returnstring = $returnstring . "UPS IS ON SWITCHED BYPASS! -- ";
        $status = 1 if ( $status != 2 );
    }
    elsif ($output_status eq "10"){
        $returnstring = $returnstring . "UPS IS ON HARDWARE FAILURE BYPASS! -- ";
        $status = 1 if ( $status != 2 );
    }
    elsif ($output_status eq "11"){
        $returnstring = $returnstring . "UPS IS SLEEPING UNTIL POWER RETURN! -- ";
        $status = 1 if ( $status != 2 );
    }
    elsif ($output_status eq "12"){
        $returnstring = $returnstring . "UPS IS ON SMART TRIM! -- ";
        $status = 1 if ( $status != 2 );
    }
    elsif ($output_status eq "13"){
        $returnstring = $returnstring . "UPS IS ON ECO MODE! -- ";
        $status = 1 if ( $status != 2 );
    }
    elsif ($output_status eq "14"){
        $returnstring = $returnstring . "UPS IS ON HOT STANDBY! -- ";
        $status = 1 if ( $status != 2 );
    }
    elsif ($output_status eq "15"){
        $returnstring = $returnstring . "UPS IS PERFORMING BATTERY TEST! -- ";
#        $status = 1 if ( $status != 2 );
    }
    elsif ($output_status eq "16"){
        $returnstring = $returnstring . "UPS IS ON EMERGENCY STATIC BYPASS! -- ";
        $status = 1 if ( $status != 2 );
    }
    elsif ($output_status eq "17"){
        $returnstring = $returnstring . "UPS IS ON STATIC BYPASS STANDBY! -- ";
        $status = 1 if ( $status != 2 );
    }
    elsif ($output_status eq "18"){
        $returnstring = $returnstring . "UPS IS ON POWER SAVING MODE! -- ";
        $status = 1 if ( $status != 2 );
    }
    elsif ($output_status eq "19"){
        $returnstring = $returnstring . "UPS IS ON SPOT MODE! -- ";
        $status = 1 if ( $status != 2 );
    }
    elsif ($output_status eq "20"){
        $returnstring = $returnstring . "UPS IS ON ECONVERSION! -- ";
        $status = 1 if ( $status != 2 );
    }
    else {
        $returnstring = $returnstring . "UNKNOWN OUTPUT STATUS! -- ";
        $status = 3 if ( ( $status != 2 ) && ( $status != 1 ) );
    }

    if ($output_load > 90) {
        $returnstring = $returnstring . "OUTPUT LOAD $output_load% -- ";
        $perfdata = $perfdata . "'load'=$output_load ";
        $status = 2;
    }
    elsif ($output_load > 80) {
        $returnstring = $returnstring . "OUTPUT LOAD $output_load% -- ";
        $perfdata = $perfdata . "'load'=$output_load ";
        $status = 1 if ( $status != 2 );
    }
    elsif ($output_load >= 0) {
        $returnstring = $returnstring . "OUTPUT LOAD $output_load% -- ";
        $perfdata = $perfdata . "'load'=$output_load ";
    }
    else {
        $returnstring = $returnstring . "OUTPUT LOAD UNKNOWN! -- ";
        $perfdata = $perfdata . "'load'=NAN ";
        $status = 3 if ( ( $status != 2 ) && ( $status != 1 ) );
    }

    if ($temperature > 93) {
        $returnstring = $returnstring . "INTERNAL TEMP $temp F";
        $perfdata = $perfdata . "'temp'=$temp ";
        $status = 2;
    }
    elsif ($temperature > 89) {
        $returnstring = $returnstring . "INTERNAL TEMP $temp F";
        $perfdata = $perfdata . "'temp'=$temp ";
        $status = 1 if ( $status != 2 );
    }
    elsif ($temperature >= 0) {
        $returnstring = $returnstring . "INTERNAL TEMP $temp F";
        $perfdata = $perfdata . "'temp'=$temp ";
    }
    else {
        $returnstring = $returnstring . "INTERNAL TEMP UNKNOWN!";
        $perfdata = $perfdata . "'temp'=NAN ";
        $status = 3 if ( ( $status != 2 ) && ( $status != 1 ) );
    }

}

####################################################################
# help and usage information                                       #
####################################################################

sub usage {
    print << "USAGE";
-----------------------------------------------------------------
$script v$script_version

Monitors PowerWare UPS via SNMP management card.

Usage: $script -H <hostname> -C <community> [...]

Options: -H     Hostname or IP address
         -C     Community (default is public)

-----------------------------------------------------------------
Copyright 2004 Altinity Limited

This program is free software; you can redistribute it or modify
it under the terms of the GNU General Public License
-----------------------------------------------------------------

USAGE
     exit 1;
}

can we just modify the current code?

Re: UPS battery lifetime alert

Posted: Wed Nov 09, 2016 6:02 pm
by rkennedy
Yes, but we are not sure what changes have been made so I recommend using what was posted above.

Re: UPS battery lifetime alert

Posted: Wed Nov 09, 2016 6:21 pm
by sa77if
rkennedy wrote:Yes, but we are not sure what changes have been made so I recommend using what was posted above.
ok i will give it a try
thanks

Re: UPS battery lifetime alert

Posted: Thu Nov 10, 2016 12:24 pm
by tmcdonald
Keep us posted.

Re: UPS battery lifetime alert

Posted: Thu Nov 10, 2016 3:30 pm
by sa77if
i modified the values according to this article and it works fine now
tank you though
you guys were great


https://exchange.nagios.org/directory/P ... ad/details

Re: UPS battery lifetime alert

Posted: Thu Nov 10, 2016 3:37 pm
by tmcdonald
Glad it's working! Mind if we close up this ticket?
All times are UTC-05:00
Page 5 of 6

Powered by phpBB® Forum Software © phpBB Limited