Nagios Support Forum

I get similar errors as gm_rajkumar:


SNMPGET Problem for ifInOctets.2 ifOutOctets.2 on [email protected]:::::1:v4only
at /usr/bin/mrtg line 2202
2013-02-06 11:16:10: WARNING: skipping because at least the query for ifInOctets.2 on did not succeed
2013-02-06 11:16:10: WARNING: no data for ifInOctets&ifOutOctets:[email protected]. Skipping further queries for Host in this round.
SNMP Error:
no response received
SNMPv2c_Session (remote host: "10.0.7.254" [10.0.7.254].161)
community: "public"
request ID: 1015862693
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/bin/../lib64/mrtg2/SNMP_util.pm line 492

2013-02-06 11:22:06: ERROR: Target[10.0.12.94_20][_IN_] ' $target->[1219]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.12.94_20][_OUT_] ' $target->[1219]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.12.94_23][_IN_] ' $target->[1222]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.12.94_23][_OUT_] ' $target->[1222]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.12.94_24][_IN_] ' $target->[1223]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.12.94_24][_OUT_] ' $target->[1223]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.4.126_1][_IN_] ' $target->[1255]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.4.126_1][_OUT_] ' $target->[1255]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.4.126_2][_IN_] ' $target->[1256]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.4.126_2][_OUT_] ' $target->[1256]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.4.126_3][_IN_] ' $target->[1257]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.4.126_3][_OUT_] ' $target->[1257]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.4.126_4][_IN_] ' $target->[1258]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.4.126_4][_OUT_] ' $target->[1258]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.4.126_5][_IN_] ' $target->[1259]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.4.126_5][_OUT_] ' $target->[1259]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.4.126_6][_IN_] ' $target->[1260]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.4.126_6][_OUT_] ' $target->[1260]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.4.126_10][_IN_] ' $target->[1261]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.4.126_10][_OUT_] ' $target->[1261]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.4.126_11][_IN_] ' $target->[1262]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.4.126_11][_OUT_] ' $target->[1262]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.4.126_13][_IN_] ' $target->[1263]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.4.126_13][_OUT_] ' $target->[1263]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.4.126_15][_IN_] ' $target->[1264]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.4.126_15][_OUT_] ' $target->[1264]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.4.126_16][_IN_] ' $target->[1265]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.4.126_16][_OUT_] ' $target->[1265]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.4.126_17][_IN_] ' $target->[1266]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.4.126_17][_OUT_] ' $target->[1266]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.4.126_18][_IN_] ' $target->[1267]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.4.126_18][_OUT_] ' $target->[1267]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.4.126_19][_IN_] ' $target->[1268]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.4.126_19][_OUT_] ' $target->[1268]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.4.126_20][_IN_] ' $target->[1269]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.4.126_20][_OUT_] ' $target->[1269]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.4.126_21][_IN_] ' $target->[1270]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.4.126_21][_OUT_] ' $target->[1270]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.13.102_1][_IN_] ' $target->[1655]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.13.102_1][_OUT_] ' $target->[1655]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.13.102_2][_IN_] ' $target->[1656]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.13.102_2][_OUT_] ' $target->[1656]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.13.102_3][_IN_] ' $target->[1657]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.13.102_3][_OUT_] ' $target->[1657]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.13.102_4][_IN_] ' $target->[1658]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.13.102_4][_OUT_] ' $target->[1658]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.13.102_5][_IN_] ' $target->[1659]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.13.102_5][_OUT_] ' $target->[1659]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.13.102_6][_IN_] ' $target->[1660]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.13.102_6][_OUT_] ' $target->[1660]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.13.102_10][_IN_] ' $target->[1661]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.13.102_10][_OUT_] ' $target->[1661]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.13.102_11][_IN_] ' $target->[1662]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.13.102_11][_OUT_] ' $target->[1662]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.13.102_13][_IN_] ' $target->[1663]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.13.102_13][_OUT_] ' $target->[1663]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.13.102_14][_IN_] ' $target->[1664]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.13.102_14][_OUT_] ' $target->[1664]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.13.102_15][_IN_] ' $target->[1665]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.13.102_15][_OUT_] ' $target->[1665]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.13.102_17][_IN_] ' $target->[1666]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.13.102_17][_OUT_] ' $target->[1666]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.13.102_18][_IN_] ' $target->[1667]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.13.102_18][_OUT_] ' $target->[1667]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.13.102_19][_IN_] ' $target->[1668]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.13.102_19][_OUT_] ' $target->[1668]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.13.102_20][_IN_] ' $target->[1669]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.13.102_20][_OUT_] ' $target->[1669]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.13.102_21][_IN_] ' $target->[1670]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.13.102_21][_OUT_] ' $target->[1670]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.13.214_13][_IN_] ' $target->[1695]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.13.214_13][_OUT_] ' $target->[1695]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.13.214_20][_IN_] ' $target->[1701]{$mode} ' did not eval into defined data
2013-02-06 11:22:06: ERROR: Target[10.0.13.214_20][_OUT_] ' $target->[1701]{$mode} ' did not eval into defined data

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
29728 nagios 20 0 98.4m 10m 956 S 15.5 0.3 87:27.36 nagios
1643 nagios 20 0 125m 4724 1924 S 11.2 0.1 0:00.34 process_perfdat
29773 mysql 20 0 2201m 96m 3604 S 8.6 2.5 177:23.42 mysqld
4283 nagios 20 0 135m 7920 2072 R 5.6 0.2 0:00.17 check_ifopersta
4277 nagios 20 0 134m 7376 2048 R 5.3 0.2 0:00.16 check_ifopersta
4284 nagios 20 0 130m 6892 2004 R 4.6 0.2 0:00.14 check_ifopersta
29725 nagios 20 0 51524 3000 992 S 1.6 0.1 10:25.76 ndo2db
2090 nagios 20 0 778m 2364 856 S 1.0 0.1 8:13.74 rrdcached
60 root 39 19 0 0 0 S 0.7 0.0 1:16.48 khugepaged
1584 root 20 0 15220 1336 900 R 0.7 0.0 0:00.04 top
7 root RT 0 0 0 0 S 0.3 0.0 0:28.43 migration/1
11 root RT 0 0 0 0 S 0.3 0.0 0:26.33 migration/2
1035 root 20 0 0 0 0 S 0.3 0.0 7:24.94 flush-253:0
4359 nagios 20 0 103m 1300 1076 S 0.3 0.0 0:00.01 check_rrdtraf
27180 nagios 20 0 214m 20m 7292 S 0.3 0.5 0:00.23 php
27211 postgres 20 0 210m 6144 4136 S 0.3 0.2 0:00.05 postmaster
29724 nagios 20 0 49840 1336 884 S 0.3 0.0 1:35.02 ndo2db
1 root 20 0 19404 1044 836 S 0.0 0.0 0:02.09 init
2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd
3 root RT 0 0 0 0 S 0.0 0.0 0:25.55 migration/0
4 root 20 0 0 0 0 S 0.0 0.0 0:00.81 ksoftirqd/0
5 root RT 0 0 0 0 S 0.0 0.0 0:00.00 migration/0
6 root RT 0 0 0 0 S 0.0 0.0 0:00.00 watchdog/0
8 root RT 0 0 0 0 S 0.0 0.0 0:00.00 migration/1
9 root 20 0 0 0 0 S 0.0 0.0 0:00.76 ksoftirqd/1
10 root RT 0 0 0 0 S 0.0 0.0 0:00.02 watchdog/1
12 root RT 0 0 0 0 S 0.0 0.0 0:00.00 migration/2
13 root 20 0 0 0 0 S 0.0 0.0 0:00.76 ksoftirqd/2
14 root RT 0 0 0 0 S 0.0 0.0 0:00.01 watchdog/2
15 root RT 0 0 0 0 S 0.0 0.0 0:25.61 migration/3
16 root RT 0 0 0 0 S 0.0 0.0 0:00.01 migration/3

I'm not getting any graph since today no host performance, no ping, no bandwidth!!

How can I check this? Please!!

Now we are getting none?

Lets run Then

Hi Scott,

I installed this: "yum install rrdtool rrdtool-devel rrdutils perl-rrdtool -y" and from then I don't get graphs in Nagios

I installed this to get Netflow data in our NagiosXI Server

I get this:

service npcd restart
NPCD Stopped.
NPCD started.
Tiene correo en /var/spool/mail/root
[root@SRVBOXASDC1009 bin]# ls /usr/local/nagios/share/perfdata/|wc -l
872
[root@SRVBOXASDC1009 bin]# ls /usr/local/nagios/share/xidpe/|wc -l
ls: no se puede acceder a /usr/local/nagios/share/xidpe/: No existe el fichero o el directorio
0

I tried it manually and checks seem to work fine, but no graphs:

./check_rrdtraf -f /var/lib/mrtg/172.18.9.1_4.rrd -w 750 -c 900 -l M
OK - Current BW in: 0Mbps Out: 0Mbps|in=.000064Mb/s;750;900 out=.000032Mb/s;750;900

Hi,

What can I do to fix this problem? I'm worried about this, I get no data in graphs and is a big problem for us

Thank you in advance!!

From what I'm reading it look like this issue can occur from using an SNMP short-name instead of the full OID for a port. Most of what I'm reading points to the same issue:

http://www.linuxquestions.org/questions ... em-507850/
https://lists.oetiker.ch/pipermail/mrtg ... 31693.html

We're still currently investigating the cause of this issue as well as the best solution...

Hi mguthrie,

Thank you for your answer.

I'll investigate in this way the problem with the Bandwidth

What can I do regarding the new problem I have since yesterday? I'm not receiving graphs in any host or service (ping, host performance...) This is a new and critical issue, but I dediced not opening a new toppic just because the problem is with graphs too.

Thank you!

Can you, please, start a new thread? Describe in details when did you notice that you were not getting any graphs, and what have you tried so far to troubleshoot/fix the issue. You can upload screenshots. Also, run the following commands and show us the output:

Hi lmiltchev,

Ok, I've started a new thread. I'm worried with that

Thank you for your help.

Thanks!