Page 8 of 13
Re: contacts.cfg is not working properly
Posted: Wed Oct 28, 2015 10:55 am
by hsmith
Can you try to use the command, and send it to one of the email logs, and post the log here for review ? I don't see anything wrong in the Nagios config files that you have posted.
Re: contacts.cfg is not working properly
Posted: Wed Oct 28, 2015 11:14 am
by sinkak
Code: Select all
sudo su nagios -c /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: test\n\nService: test\nHost: test\nAddress: test\nState: test\n\nDate/Time: test\n\nAdditional Info:\n\test\n" | /usr/bin/mail -s "** test Service Alert: test/test is test **" "[email protected]"
sudo su nagios -c /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: test\n\nService: test\nHost: test\nAddress: test\nState: test\n\nDate/Time: test\n\nAdditional Info:\n\test\n" | /usr/bin/mail -s "** test Service Alert: test/test is test **" "[email protected]"
Code: Select all
tail -f /var/log/mail.log
Oct 28 16:07:29 nagios-2015 postfix/qmgr[31700]: 05C5B42AC2: removed
Oct 28 16:09:01 nagios-2015 postfix/pickup[28138]: A968F42AC2: uid=1000 from=<ubuntu>
Oct 28 16:09:01 nagios-2015 postfix/cleanup[4813]: A968F42AC2: message-id=<20151028160901.A968F42AC2@ip-10-0-10-149>
Oct 28 16:09:01 nagios-2015 postfix/qmgr[31700]: A968F42AC2: from=<ubuntu@ip-10-0-10-149>, size=339, nrcpt=1 (queue active)
Oct 28 16:09:02 nagios-2015 postfix/smtp[7437]: A968F42AC2: to=<[email protected]>, relay=smtp17.msoutlookonline.net[64.78.22.100]:25, delay=0.39, delays=0.01/0/0.27/0.11, dsn=5.5.2, status=bounced (host smtp17.msoutlookonline.net[64.78.22.100] said: 504 5.5.2 <ubuntu@ip-10-0-10-149>: Sender address rejected: need fully-qualified address (in reply to RCPT TO command))
Oct 28 16:09:02 nagios-2015 postfix/cleanup[4813]: 26DD742AE0: message-id=<20151028160902.26DD742AE0@ip-10-0-10-149>
Oct 28 16:09:02 nagios-2015 postfix/qmgr[31700]: 26DD742AE0: from=<>, size=2332, nrcpt=1 (queue active)
Oct 28 16:09:02 nagios-2015 postfix/bounce[7449]: A968F42AC2: sender non-delivery notification: 26DD742AE0
Oct 28 16:09:02 nagios-2015 postfix/qmgr[31700]: A968F42AC2: removed
Oct 28 16:09:02 nagios-2015 postfix/local[4818]: 26DD742AE0: to=<ubuntu@ip-10-0-10-149>, relay=local, delay=0.01, delays=0/0/0/0, dsn=2.0.0, status=sent (delivered to mailbox)
Oct 28 16:09:02 nagios-2015 postfix/qmgr[31700]: 26DD742AE0: removed
Oct 28 16:09:07 nagios-2015 postfix/pickup[28138]: D1E5A42AC2: uid=1000 from=<ubuntu>
Oct 28 16:09:07 nagios-2015 postfix/cleanup[4813]: D1E5A42AC2: message-id=<20151028160907.D1E5A42AC2@ip-10-0-10-149>
Oct 28 16:09:07 nagios-2015 postfix/qmgr[31700]: D1E5A42AC2: from=<ubuntu@ip-10-0-10-149>, size=344, nrcpt=1 (queue active)
Oct 28 16:09:08 nagios-2015 postfix/smtp[7437]: D1E5A42AC2: to=<[email protected]>, relay=smtp17.msoutlookonline.net[64.78.22.100]:25, delay=0.38, delays=0.01/0/0.25/0.12, dsn=5.5.2, status=bounced (host smtp17.msoutlookonline.net[64.78.22.100] said: 504 5.5.2 <ubuntu@ip-10-0-10-149>: Sender address rejected: need fully-qualified address (in reply to RCPT TO command))
Oct 28 16:09:08 nagios-2015 postfix/cleanup[4813]: 4C40842AE0: message-id=<20151028160908.4C40842AE0@ip-10-0-10-149>
Oct 28 16:09:08 nagios-2015 postfix/qmgr[31700]: 4C40842AE0: from=<>, size=2352, nrcpt=1 (queue active)
Oct 28 16:09:08 nagios-2015 postfix/bounce[7449]: D1E5A42AC2: sender non-delivery notification: 4C40842AE0
Oct 28 16:09:08 nagios-2015 postfix/qmgr[31700]: D1E5A42AC2: removed
Oct 28 16:09:08 nagios-2015 postfix/local[4818]: 4C40842AE0: to=<ubuntu@ip-10-0-10-149>, relay=local, delay=0.01, delays=0/0/0/0, dsn=2.0.0, status=sent (delivered to mailbox)
Oct 28 16:09:08 nagios-2015 postfix/qmgr[31700]: 4C40842AE0: removed
Re: contacts.cfg is not working properly
Posted: Wed Oct 28, 2015 11:15 am
by sinkak
using command it doesnt work for both emails.
but from nagios i get alerts to warning email but not to critical email.
Re: contacts.cfg is not working properly
Posted: Wed Oct 28, 2015 11:44 am
by sinkak
Code: Select all
more /var/mail/ubuntu
Final-Recipient: rfc822; [email protected]
Action: failed
Status: 5.5.2
Remote-MTA: dns; smtp17.msoutlookonline.net
Diagnostic-Code: smtp; 504 5.5.2 <ubuntu@ip-10-0-10-149>: Sender address
rejected: need fully-qualified address
Final-Recipient: rfc822; [email protected]
Action: failed
Status: 5.5.2
Remote-MTA: dns; smtp17.msoutlookonline.net
Diagnostic-Code: smtp; 504 5.5.2 <ubuntu@ip-10-0-10-149>: Sender address
rejected: need fully-qualified address
Final-Recipient: rfc822; [email protected]
Action: failed
Status: 5.0.0
Remote-MTA: dns; mx-apac.mail.gm0.yahoodns.net
Diagnostic-Code: smtp; 501 Syntax error in parameters or arguments
it is failing for these email addresses ( [email protected],[email protected],[email protected]).
Command is working for only gmail address.
Re: contacts.cfg is not working properly
Posted: Wed Oct 28, 2015 12:41 pm
by hsmith
See if this command works:
Code: Select all
echo "something" | usr/bin/mail -a "From:<USERNAME>@<YOURDOMAIN><.COM/NET/ORG/LOCAL> -s "Test" <YOUREMAILADDRESS>
In the logs your email is getting bounced because it is coming from root@localhost or something similar. It is not going to accept it unless it comes from a FQDN,
[email protected].
Try that command, to your various emails, and post the results from the mail log please.
Re: contacts.cfg is not working properly
Posted: Wed Oct 28, 2015 1:35 pm
by sinkak
Code: Select all
Oct 28 18:18:29 nagios-2015 postfix/smtp[31841]: BB3A742AC2: to=<[email protected]>, relay=smtp17.msoutlookonline.net[64.78.22.100]:25, delay=0.37, delays=0.01/0/0.25/0.11, dsn=5.5.2, status=bounced (host smtp17.msoutlookonline.net[64.78.22.100] said: 504 5.5.2 <ubuntu@ip-10-0-10-149>: Sender address rejected: need fully-qualified address (in reply to RCPT TO command))
same error.
what should i use in sender address?
should i edit /etc/postfix/main.cf
but still alerts-warning email is working from
[email protected]. it is not working for alerts-911 email.
Re: contacts.cfg is not working properly
Posted: Wed Oct 28, 2015 1:42 pm
by hsmith
Try this. It was rejected because it wasn't in the format of a FQDN.
We'll not mess with main.cf for now.
Re: contacts.cfg is not working properly
Posted: Wed Oct 28, 2015 2:11 pm
by sinkak
still the same. i dont think it is taking from address from this command.
Code: Select all
echo "something" | /usr/bin/mail -a "From:[email protected]" -s "Test" [email protected]
Oct 28 19:07:18 nagios-2015 postfix/qmgr[31700]: 95DF142AC2: from=<ubuntu@ip-10-0-10-149>, size=302, nrcpt=1 (queue active)
Oct 28 19:07:19 nagios-2015 postfix/smtp[520]: 95DF142AC2: to=<[email protected]>, relay=smtp17.msoutlookonline.net[64.78.22.100]:25, delay=0.43, delays=0.01/0/0.28/0.14, dsn=5.5.2, status=bounced (host smtp17.msoutlookonline.net[64.78.22.100] said: 504 5.5.2 <ubuntu@ip-10-0-10-149>: Sender address rejected: need fully-qualified address (in reply to RCPT TO command))
Re: contacts.cfg is not working properly
Posted: Wed Oct 28, 2015 2:16 pm
by hsmith
Send it to your gmail address to verify it is coming from the correct address. I installed the same version of Ubuntu you are using so I would have matching files.
Re: contacts.cfg is not working properly
Posted: Wed Oct 28, 2015 2:24 pm
by sinkak
it worked for gmail. i got mail from
[email protected]
Code: Select all
echo "something" | /usr/bin/mail -a "From:[email protected]" -s "Test" [email protected]
Oct 28 19:20:40 nagios-2015 postfix/qmgr[31700]: B6D7542AC2: from=<ubuntu@ip-10-0-10-149>, size=299, nrcpt=1 (queue active)
Oct 28 19:20:41 nagios-2015 postfix/smtp[8807]: B6D7542AC2: to=<[email protected]>, relay=gmail-smtp-in.l.google.com[74.125.29.26]:25, delay=1.1, delays=0.01/0/0.9/0.14, dsn=2.0.0, status=sent (250 2.0.0 OK 1446060109 f23si43382736qhc.77 - gsmtp)
Oct 28 19:20:41 nagios-2015 postfix/qmgr[31700]: B6D7542AC2: removed
Oct 28 19:22:27 nagios-2015 postfix/pickup[32085]: 8052E42AC2: uid=106 from=<nagios>