I am facing this issue lately with one of the windows server. I tried reinstalling the client but no success. Any idea
CPU Usage Critical 8d 2h 26m 17s 5/5 2013-05-03 02:36:49 CRITICAL - Socket timeout after 10 seconds
Drive C: Disk Usage Critical 8d 2h 26m 5s 5/5 2013-05-03 02:36:49 CRITICAL - Socket timeout after 10 seconds
Logon Errors Critical 8d 2h 25m 53s 5/5 2013-05-03 02:38:37 CRITICAL - Socket timeout after 10 seconds
Memory Usage Critical 8d 2h 25m 41s 5/5 2013-05-03 02:39:16 CRITICAL - Socket timeout after 10 seconds
-----------------------------------------------
Here is the result of NMAP:
nmap <my ip> -p 12489
Starting Nmap 4.11 ( http://www.insecure.org/nmap/ ) at 2013-05-03 04:16 EDT
Interesting ports on <my ip>:
PORT STATE SERVICE
12489/tcp filtered unknown
Nmap finished: 1 IP address (1 host up) scanned in 0.333 seconds
-----------------------------------------------
Any idea to get away with this issue?
Thanks!
Socket timeout after 10 seconds
-
- -fno-stack-protector
- Posts: 4366
- Joined: Mon Nov 19, 2012 12:10 pm
Re: Socket timeout after 10 seconds
Filtered could mean that this port is not actually open, either via windows firewall, a proxy or transparent firewall, or that the service is not running. Can you verify that you have created a windows firewall rule to allow 12489 incoming? Also that there is not a firewall, or that it has ports opened to allow communication? If these are not the case, you can also use the -t flag with check_nt to extend the default timeout. -t 30 or -t 60 is fairly common.
Nagios-Plugins maintainer exclusively, unless you have other C language bugs with open-source nagios projects, then I am happy to help! Please pm or use other communication to alert me to issues as I no longer track the forum.
-
- Posts: 15
- Joined: Tue Feb 12, 2013 9:13 am
Re: Socket timeout after 10 seconds
@sreinhardt,
This didn't help. Any other suggestions?
This didn't help. Any other suggestions?
-
- DevOps Engineer
- Posts: 19396
- Joined: Tue Nov 15, 2011 3:11 pm
- Location: Nagios Enterprises
- Contact:
Re: Socket timeout after 10 seconds
Can you confirm that NSClient++ service is running on the remote system and there is NO firewall between these systems?
-
- Posts: 15
- Joined: Tue Feb 12, 2013 9:13 am
Re: Socket timeout after 10 seconds
After comparing the results with 2 different server on different ip, finally figured out that this server hasn't been allowed port 12489 access from Nagios. After allowing the port, everything seems working.
Thanks all!
Thanks all!