Re: AW: [Nagios-devel] Possible bug in performace data
Posted: Tue Nov 23, 2004 1:19 am
Andreas,
Thanks for the second opinion. None of my plugins have 'quotes'.
You are using the --with-file-perfdata make option?
Cheers,
Ben
Husch Andreas wrote:
> Hi,
> this works fine for me, my output in the serviceperf.log file looks lik=
e this:
> 1099034929 tizian CPULOAD CPU Load 36% (5 min average) OK =
'5 min avg Load'=3D36%;70;90;0;100
>=20
> I'm using Nagios 1.2 too.
>=20
> Regards
> Andreas
>=20
> -----Urspr=FCngliche Nachricht-----
> Von: [email protected] [mailto:nagios-devel-admi=
[email protected]] Im Auftrag von Ben Clewett
> Gesendet: Dienstag, 23. November 2004 10:02
> An: [email protected]
> Betreff: [Nagios-devel] Possible bug in performace data
>=20
>=20
> Dear members, I have has the following possible bug reported to me. Ca=
n anybody clarify this? Regards, Ben.
>=20
> I'm having the following problem with Nagios in combination with the pe=
rfparse tool:
>=20
> When a certain check generates performance data with space characters i=
n the metric with single quotes around them, the single quotes *disappear=
* when the information is written to the perfdata-service.log file. As a =
result, the performance data gets parsed incorrectly by perfparse.
>=20
> For example, if I do the following check manually:
> $ check_nt -H rlswas1c -v CPULOAD -l 5,50,90 The result is something li=
ke:
> CPU Load 0% (5 min average) |'5 min avg Load'=3D0%;50;90;0;100 Notice t=
he single quotes around '5 min avg Load'.
>=20
> However, if I let Nagios do the check, the following data appears in th=
e perfdata-service.log file:
> 1101131232 rlswas1c CPU load CPU Load 0% (5 min aver=
age)
> OK 5 min avg Load=3D0%;50;75;0;100
> Notice that there are NO single quotes around '5 min avg Load'.
>=20
> Does anyone have an idea where the quotes are being dropped and what I =
can do about it?
>=20
> I'm using:
> Nagios 1.2
> PerfParse 0.103.1
> A recent CVS snapshot of Nagios-plugins
>=20
>=20
>=20
>=20
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide Read honest & candid re=
views on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.=20
> http://productguide.itmanagersjournal.com/
> _______________________________________________
> Nagios-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/lis ... gios-devel
>=20
>=20
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.=20
> http://productguide.itmanagersjournal.com/
> _______________________________________________
> Nagios-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/lis ... gios-devel
>=20
This post was automatically imported from historical nagios-devel mailing list archives
Original poster: [email protected]
Thanks for the second opinion. None of my plugins have 'quotes'.
You are using the --with-file-perfdata make option?
Cheers,
Ben
Husch Andreas wrote:
> Hi,
> this works fine for me, my output in the serviceperf.log file looks lik=
e this:
> 1099034929 tizian CPULOAD CPU Load 36% (5 min average) OK =
'5 min avg Load'=3D36%;70;90;0;100
>=20
> I'm using Nagios 1.2 too.
>=20
> Regards
> Andreas
>=20
> -----Urspr=FCngliche Nachricht-----
> Von: [email protected] [mailto:nagios-devel-admi=
[email protected]] Im Auftrag von Ben Clewett
> Gesendet: Dienstag, 23. November 2004 10:02
> An: [email protected]
> Betreff: [Nagios-devel] Possible bug in performace data
>=20
>=20
> Dear members, I have has the following possible bug reported to me. Ca=
n anybody clarify this? Regards, Ben.
>=20
> I'm having the following problem with Nagios in combination with the pe=
rfparse tool:
>=20
> When a certain check generates performance data with space characters i=
n the metric with single quotes around them, the single quotes *disappear=
* when the information is written to the perfdata-service.log file. As a =
result, the performance data gets parsed incorrectly by perfparse.
>=20
> For example, if I do the following check manually:
> $ check_nt -H rlswas1c -v CPULOAD -l 5,50,90 The result is something li=
ke:
> CPU Load 0% (5 min average) |'5 min avg Load'=3D0%;50;90;0;100 Notice t=
he single quotes around '5 min avg Load'.
>=20
> However, if I let Nagios do the check, the following data appears in th=
e perfdata-service.log file:
> 1101131232 rlswas1c CPU load CPU Load 0% (5 min aver=
age)
> OK 5 min avg Load=3D0%;50;75;0;100
> Notice that there are NO single quotes around '5 min avg Load'.
>=20
> Does anyone have an idea where the quotes are being dropped and what I =
can do about it?
>=20
> I'm using:
> Nagios 1.2
> PerfParse 0.103.1
> A recent CVS snapshot of Nagios-plugins
>=20
>=20
>=20
>=20
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide Read honest & candid re=
views on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.=20
> http://productguide.itmanagersjournal.com/
> _______________________________________________
> Nagios-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/lis ... gios-devel
>=20
>=20
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.=20
> http://productguide.itmanagersjournal.com/
> _______________________________________________
> Nagios-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/lis ... gios-devel
>=20
This post was automatically imported from historical nagios-devel mailing list archives
Original poster: [email protected]