Re: [Nagios-devel] Nagios 2.0a1 hogging resources
Posted: Mon Sep 20, 2004 4:48 am
Hi,
This install was doen without embedded Perl..
Tom
Andreas Ericsson wrote:
> Tom DE BLENDE (GCC) wrote:
>
>> Hi,
>>
>> I thought I just mention that over the weekend, the Nagios 2.0a1
>> installation I'm running was starting to take up a lot of system
>> resources:
>>
>> 13:21:54 up 17 days, 4:15, 1 user, load average: 2.66, 1.92, 1.89
>> 268 processes: 261 sleeping, 7 running, 0 zombie, 0 stopped
>> CPU states: cpu user nice system irq softirq iowait idle
>> total 19.2% 0.0% 20.5% 0.0% 0.0% 1.4% 58.5%
>> cpu00 17.4% 0.0% 23.2% 0.0% 0.0% 1.5% 57.7%
>> cpu01 21.0% 0.0% 17.8% 0.0% 0.1% 1.3% 59.4%
>> Mem: 1028544k av, 693836k used, 334708k free, 0k shrd,
>> 213848k buff
>> 339560k actv, 69812k in_d, 9512k in_c
>> Swap: 2044072k av, 31252k used, 2012820k free
>> 156852k cached
>>
>> PID USER PRI NI SIZE RSS SHARE STAT %CPU %MEM TIME CPU COMMAND
>> 12226 nagios 25 0 -12M 0G -18M R 0.5 1670289.6 94:53
>> 0 nagios
>>
>>
>> Restarting the process. Solved it for now. Tell me if you want me to
>> do any sort of testing if you think it can be of use for the
>> development of Nag 2.0.
>>
>
> This is the embedded perl thingie at work (it seems perl can't be
> embedded properly without issues like this. Apache and mod_perl has
> the same problem). Re-compile without it and things should work
> normally again (I've been running it for 3 months now, and had no
> problems what so ever).
>
>> Kind regards,
>> Tom
>>
This post was automatically imported from historical nagios-devel mailing list archives
Original poster: [email protected]
This install was doen without embedded Perl..
Tom
Andreas Ericsson wrote:
> Tom DE BLENDE (GCC) wrote:
>
>> Hi,
>>
>> I thought I just mention that over the weekend, the Nagios 2.0a1
>> installation I'm running was starting to take up a lot of system
>> resources:
>>
>> 13:21:54 up 17 days, 4:15, 1 user, load average: 2.66, 1.92, 1.89
>> 268 processes: 261 sleeping, 7 running, 0 zombie, 0 stopped
>> CPU states: cpu user nice system irq softirq iowait idle
>> total 19.2% 0.0% 20.5% 0.0% 0.0% 1.4% 58.5%
>> cpu00 17.4% 0.0% 23.2% 0.0% 0.0% 1.5% 57.7%
>> cpu01 21.0% 0.0% 17.8% 0.0% 0.1% 1.3% 59.4%
>> Mem: 1028544k av, 693836k used, 334708k free, 0k shrd,
>> 213848k buff
>> 339560k actv, 69812k in_d, 9512k in_c
>> Swap: 2044072k av, 31252k used, 2012820k free
>> 156852k cached
>>
>> PID USER PRI NI SIZE RSS SHARE STAT %CPU %MEM TIME CPU COMMAND
>> 12226 nagios 25 0 -12M 0G -18M R 0.5 1670289.6 94:53
>> 0 nagios
>>
>>
>> Restarting the process. Solved it for now. Tell me if you want me to
>> do any sort of testing if you think it can be of use for the
>> development of Nag 2.0.
>>
>
> This is the embedded perl thingie at work (it seems perl can't be
> embedded properly without issues like this. Apache and mod_perl has
> the same problem). Re-compile without it and things should work
> normally again (I've been running it for 3 months now, and had no
> problems what so ever).
>
>> Kind regards,
>> Tom
>>
This post was automatically imported from historical nagios-devel mailing list archives
Original poster: [email protected]