Re: [Nagios-devel] 2.0 CGI speed
Posted: Mon Sep 06, 2004 5:34 am
Jason,
This is definitely not the place, BUT, if you use the PerfParse product,
you can get a similar report in a second or two
Sorry about gate crashing your thread
Ben.
Jason Martin wrote:
> I've been doing some performance tests of Nagios with the latest
> CVS code and am having some concerns about large-scale
> installations. For example, with 20K passive services it takes
>
>10 minutes on 700Mhz machine to get a status.cgi back. Is there
>
> anything that can be done to improve upon this? (aside from
> machine upgrades, I'm going to do that anyway).
>
> Thanks,
> -Jason Martin
>
This post was automatically imported from historical nagios-devel mailing list archives
Original poster: [email protected]
This is definitely not the place, BUT, if you use the PerfParse product,
you can get a similar report in a second or two
Sorry about gate crashing your thread
Ben.
Jason Martin wrote:
> I've been doing some performance tests of Nagios with the latest
> CVS code and am having some concerns about large-scale
> installations. For example, with 20K passive services it takes
>
>10 minutes on 700Mhz machine to get a status.cgi back. Is there
>
> anything that can be done to improve upon this? (aside from
> machine upgrades, I'm going to do that anyway).
>
> Thanks,
> -Jason Martin
>
This post was automatically imported from historical nagios-devel mailing list archives
Original poster: [email protected]