Page 1 of 3
NagiosXI - Change command, get NaN in graph
Posted: Wed Dec 04, 2013 2:06 pm
by JumpingSnake
So I edited my check ram command to be the following:
Code: Select all
/usr/local/nagios/libexec/check_nrpe -H <IP of the test server> -t 30 -c CheckMEM -a MaxWarn=100% MaxCrit=101% ShowAll=long type=physical type=page type=virtual
and I get the following for output:
Code: Select all
OK: physical memory: Total: 192G - Used: 96.9G (50%) - Free: 95.1G (50%), page file: Total: 384G - Used: 97.7G (25%) - Free: 286G (75%), virtual memory: Total: 8T - Used: 279M (0%) - Free: 8T (100%)|'physical memory %'=50%;100;101 'physical memory'=96.88G;192;193.91;0;192 'page file %'=25%;100;101 'page file'=97.67G;383.99;387.83;0;383.99 'virtual memory %'=0%;100;101 'virtual memory'=278.8M;8388607.87;8472493.95;0;8388607.87
So it's returning the correct values of the RAM and it's usage, but this is what I see when I go to check any servers using this command:
Nagios.jpg
What's happening? Why does the command work, but the graphs not? Is it because of the values of 100 and 101?
Re: NagiosXI - Change command, get NaN in graph
Posted: Wed Dec 04, 2013 2:19 pm
by sreinhardt
Is this also happening with your virtual_mem_% graphs? Did you change counter types, from non-% to %? I would not believe the 100 and 101 are causing an issue as they should just be warning\critical values for the graph.
Re: NagiosXI - Change command, get NaN in graph
Posted: Wed Dec 04, 2013 2:19 pm
by abrist
You may have changed the number of datasources which is not supported by rrds. Lets check the following logs:
Code: Select all
tail -25 /usr/local/nagios/var/perfdata.log
tail -25 /usr/local/nagios/var/npcd.log
Re: NagiosXI - Change command, get NaN in graph
Posted: Wed Dec 04, 2013 5:05 pm
by JumpingSnake
sreinhardt - Yes, it's showing up for the virtual_mem_% as well. I don't believe that I've changed the type.
abrist -
perfdata.log
Code: Select all
2013-12-04 12:48:26 [32080] [0] *** process_perfdata.pl terminated on signal ALRM
2013-12-04 12:59:04 [9429] [0] *** TIMEOUT: Timeout after 5 secs. ***
2013-12-04 12:59:04 [9429] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2013-12-04 12:59:04 [9429] [0] *** TIMEOUT: Please check your npcd.cfg
2013-12-04 12:59:04 [9429] [0] *** TIMEOUT: /usr/local/nagios/var/spool/perfdata//1386183517.perfdata.service-PID-9429 deleted
2013-12-04 12:59:04 [9429] [0] *** Timeout while processing Host: "<host1>" Service: "Disk_Usage"
2013-12-04 12:59:04 [9429] [0] *** process_perfdata.pl terminated on signal ALRM
2013-12-04 13:07:22 [17060] [0] *** TIMEOUT: Timeout after 5 secs. ***
2013-12-04 13:07:22 [17060] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2013-12-04 13:07:22 [17060] [0] *** TIMEOUT: Please check your npcd.cfg
2013-12-04 13:07:22 [17060] [0] *** TIMEOUT: /usr/local/nagios/var/spool/perfdata//1386184027.perfdata.service-PID-17060 deleted
2013-12-04 13:07:22 [17060] [0] *** Timeout while processing Host: "<host2>" Service: "CPU"
2013-12-04 13:07:22 [17060] [0] *** process_perfdata.pl terminated on signal ALRM
2013-12-04 13:18:27 [27619] [0] *** TIMEOUT: Timeout after 5 secs. ***
2013-12-04 13:18:27 [27619] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2013-12-04 13:18:27 [27619] [0] *** TIMEOUT: Please check your npcd.cfg
2013-12-04 13:18:27 [27619] [0] *** TIMEOUT: /usr/local/nagios/var/spool/perfdata//1386184687.perfdata.service-PID-27619 deleted
2013-12-04 13:18:27 [27619] [0] *** Timeout while processing Host: "<host3>" Service: "CPU"
2013-12-04 13:18:27 [27619] [0] *** process_perfdata.pl terminated on signal ALRM
2013-12-04 13:44:03 [18871] [0] *** TIMEOUT: Timeout after 5 secs. ***
2013-12-04 13:44:03 [18871] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2013-12-04 13:44:03 [18871] [0] *** TIMEOUT: Please check your npcd.cfg
2013-12-04 13:44:03 [18871] [0] *** TIMEOUT: /usr/local/nagios/var/spool/perfdata//1386186217.perfdata.service-PID-18871 deleted
2013-12-04 13:44:03 [18871] [0] *** Timeout while processing Host: "<host4>" Service: "Dell_-_Check_OMSA"
2013-12-04 13:44:03 [18871] [0] *** process_perfdata.pl terminated on signal ALRM
npcd.log
Code: Select all
[12-04-2013 10:43:12] NPCD: WARN: MAX load reached: load 12.680000/10.000000 at i=0[12-04-2013 10:43:27] NPCD: WARN: MAX load reached: load 14.110000/10.000000 at i=1[12-04-2013 10:43:42] NPCD: WARN: MAX load reached: load 12.400000/10.000000 at i=1[12-04-2013 10:43:57] NPCD: WARN: MAX load reached: load 15.340000/10.000000 at i=1[12-04-2013 10:44:12] NPCD: WARN: MAX load reached: load 15.390000/10.000000 at i=1[12-04-2013 10:44:27] NPCD: WARN: MAX load reached: load 12.280000/10.000000 at i=1[12-04-2013 10:45:38] NPCD: WARN: MAX load reached: load 10.600000/10.000000 at i=0[12-04-2013 10:45:53] NPCD: WARN: MAX load reached: load 11.740000/10.000000 at i=1[12-04-2013 10:46:08] NPCD: WARN: MAX load reached: load 12.270000/10.000000 at i=1[12-04-2013 10:46:23] NPCD: WARN: MAX load reached: load 10.390000/10.000000 at i=1[12-04-2013 10:47:02] NPCD: WARN: MAX load reached: load 10.010000/10.000000 at i=12[12-04-2013 10:57:54] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 10:57:54] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386176257.perfdata.service'
[12-04-2013 10:58:56] NPCD: WARN: MAX load reached: load 10.720000/10.000000 at i=0[12-04-2013 10:59:11] NPCD: WARN: MAX load reached: load 10.050000/10.000000 at i=1[12-04-2013 11:01:26] NPCD: WARN: MAX load reached: load 10.700000/10.000000 at i=0[12-04-2013 11:02:15] NPCD: WARN: MAX load reached: load 11.480000/10.000000 at i=0[12-04-2013 11:04:14] NPCD: WARN: MAX load reached: load 11.790000/10.000000 at i=0[12-04-2013 11:07:10] NPCD: WARN: MAX load reached: load 11.010000/10.000000 at i=0[12-04-2013 11:07:25] NPCD: WARN: MAX load reached: load 10.740000/10.000000 at i=1[12-04-2013 11:07:40] NPCD: WARN: MAX load reached: load 10.570000/10.000000 at i=1[12-04-2013 11:08:11] NPCD: WARN: MAX load reached: load 10.480000/10.000000 at i=0[12-04-2013 11:08:49] NPCD: WARN: MAX load reached: load 10.220000/10.000000 at i=0[12-04-2013 11:09:04] NPCD: WARN: MAX load reached: load 12.920000/10.000000 at i=1[12-04-2013 11:09:19] NPCD: WARN: MAX load reached: load 13.410000/10.000000 at i=1[12-04-2013 11:09:34] NPCD: WARN: MAX load reached: load 11.480000/10.000000 at i=1[12-04-2013 11:13:44] NPCD: WARN: MAX load reached: load 10.170000/10.000000 at i=0[12-04-2013 11:13:59] NPCD: WARN: MAX load reached: load 11.490000/10.000000 at i=1[12-04-2013 11:14:14] NPCD: WARN: MAX load reached: load 13.260000/10.000000 at i=1[12-04-2013 11:14:29] NPCD: WARN: MAX load reached: load 13.920000/10.000000 at i=1[12-04-2013 11:14:44] NPCD: WARN: MAX load reached: load 14.150000/10.000000 at i=1[12-04-2013 11:14:59] NPCD: WARN: MAX load reached: load 12.350000/10.000000 at i=1[12-04-2013 11:15:14] NPCD: WARN: MAX load reached: load 11.900000/10.000000 at i=1[12-04-2013 11:15:37] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 11:15:37] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386177218.perfdata.service'
[12-04-2013 11:15:57] NPCD: WARN: MAX load reached: load 11.120000/10.000000 at i=7[12-04-2013 11:16:12] NPCD: WARN: MAX load reached: load 12.870000/10.000000 at i=7[12-04-2013 11:16:27] NPCD: WARN: MAX load reached: load 11.070000/10.000000 at i=7[12-04-2013 11:16:42] NPCD: WARN: MAX load reached: load 11.310000/10.000000 at i=7[12-04-2013 11:16:57] NPCD: WARN: MAX load reached: load 11.290000/10.000000 at i=7[12-04-2013 11:17:12] NPCD: WARN: MAX load reached: load 12.570000/10.000000 at i=7[12-04-2013 11:17:27] NPCD: WARN: MAX load reached: load 12.470000/10.000000 at i=7[12-04-2013 11:17:42] NPCD: WARN: MAX load reached: load 11.620000/10.000000 at i=7[12-04-2013 11:17:57] NPCD: WARN: MAX load reached: load 10.410000/10.000000 at i=7[12-04-2013 11:18:40] NPCD: WARN: MAX load reached: load 11.350000/10.000000 at i=12[12-04-2013 11:18:55] NPCD: WARN: MAX load reached: load 11.070000/10.000000 at i=12[12-04-2013 11:21:22] NPCD: WARN: MAX load reached: load 10.240000/10.000000 at i=0[12-04-2013 11:21:38] NPCD: WARN: MAX load reached: load 10.950000/10.000000 at i=1[12-04-2013 11:21:53] NPCD: WARN: MAX load reached: load 12.020000/10.000000 at i=1[12-04-2013 11:22:08] NPCD: WARN: MAX load reached: load 13.660000/10.000000 at i=1[12-04-2013 11:22:23] NPCD: WARN: MAX load reached: load 12.780000/10.000000 at i=1[12-04-2013 11:22:38] NPCD: WARN: MAX load reached: load 14.720000/10.000000 at i=1[12-04-2013 11:22:53] NPCD: WARN: MAX load reached: load 14.690000/10.000000 at i=1[12-04-2013 11:23:08] NPCD: WARN: MAX load reached: load 13.670000/10.000000 at i=1[12-04-2013 11:23:23] NPCD: WARN: MAX load reached: load 10.780000/10.000000 at i=1[12-04-2013 11:24:03] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 11:24:03] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386177727.perfdata.service'
[12-04-2013 11:24:03] NPCD: WARN: MAX load reached: load 10.720000/10.000000 at i=12[12-04-2013 11:27:35] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 11:27:35] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386178027.perfdata.service'
[12-04-2013 11:27:50] NPCD: WARN: MAX load reached: load 10.120000/10.000000 at i=0[12-04-2013 11:32:36] NPCD: WARN: MAX load reached: load 11.000000/10.000000 at i=0[12-04-2013 11:32:51] NPCD: WARN: MAX load reached: load 10.900000/10.000000 at i=1[12-04-2013 11:33:06] NPCD: WARN: MAX load reached: load 12.730000/10.000000 at i=1[12-04-2013 11:33:21] NPCD: WARN: MAX load reached: load 10.410000/10.000000 at i=1[12-04-2013 11:38:05] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 11:38:05] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386178657.perfdata.service'
[12-04-2013 11:38:20] NPCD: WARN: MAX load reached: load 10.690000/10.000000 at i=0[12-04-2013 11:39:15] NPCD: WARN: MAX load reached: load 10.170000/10.000000 at i=0[12-04-2013 12:04:04] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 12:04:04] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386180217.perfdata.service'
[12-04-2013 12:18:35] NPCD: WARN: MAX load reached: load 10.350000/10.000000 at i=0[12-04-2013 12:18:50] NPCD: WARN: MAX load reached: load 11.720000/10.000000 at i=1[12-04-2013 12:19:05] NPCD: WARN: MAX load reached: load 10.460000/10.000000 at i=1[12-04-2013 12:24:23] NPCD: WARN: MAX load reached: load 12.520000/10.000000 at i=0[12-04-2013 12:24:38] NPCD: WARN: MAX load reached: load 13.840000/10.000000 at i=1[12-04-2013 12:24:53] NPCD: WARN: MAX load reached: load 11.350000/10.000000 at i=1[12-04-2013 12:27:50] NPCD: WARN: MAX load reached: load 10.310000/10.000000 at i=0[12-04-2013 12:43:53] NPCD: WARN: MAX load reached: load 12.270000/10.000000 at i=0[12-04-2013 12:44:09] NPCD: WARN: MAX load reached: load 13.210000/10.000000 at i=1[12-04-2013 12:44:24] NPCD: WARN: MAX load reached: load 11.310000/10.000000 at i=1[12-04-2013 12:46:34] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 12:46:34] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386182767.perfdata.service'
[12-04-2013 12:48:26] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 12:48:26] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386182887.perfdata.service'
[12-04-2013 12:48:41] NPCD: WARN: MAX load reached: load 11.960000/10.000000 at i=0[12-04-2013 12:48:56] NPCD: WARN: MAX load reached: load 10.700000/10.000000 at i=1[12-04-2013 12:49:11] NPCD: WARN: MAX load reached: load 12.080000/10.000000 at i=1[12-04-2013 12:49:26] NPCD: WARN: MAX load reached: load 10.640000/10.000000 at i=1[12-04-2013 12:49:41] NPCD: WARN: MAX load reached: load 11.570000/10.000000 at i=1[12-04-2013 12:59:04] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 12:59:04] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386183517.perfdata.service'
[12-04-2013 12:59:19] NPCD: WARN: MAX load reached: load 11.670000/10.000000 at i=0[12-04-2013 13:07:22] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 13:07:22] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386184027.perfdata.service'
[12-04-2013 13:07:37] NPCD: WARN: MAX load reached: load 10.110000/10.000000 at i=0[12-04-2013 13:18:27] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 13:18:27] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386184687.perfdata.service'
[12-04-2013 13:18:42] NPCD: WARN: MAX load reached: load 10.900000/10.000000 at i=0[12-04-2013 13:34:03] NPCD: WARN: MAX load reached: load 10.860000/10.000000 at i=0[12-04-2013 13:44:04] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 13:44:04] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386186217.perfdata.service'
[12-04-2013 13:44:19] NPCD: WARN: MAX load reached: load 10.400000/10.000000 at i=0[12-04-2013 13:56:18] NPCD: WARN: MAX load reached: load 11.220000/10.000000 at i=0[12-04-2013 13:56:33] NPCD: WARN: MAX load reached: load 10.090000/10.000000 at i=1[12-04-2013 13:58:13] NPCD: WARN: MAX load reached: load 10.190000/10.000000 at i=0[12-04-2013 13:58:28] NPCD: WARN: MAX load reached: load 11.450000/10.000000 at i=1[12-04-2013 13:58:59] NPCD: WARN: MAX load reached: load 10.130000/10.000000 at i=0[12-04-2013 13:59:14] NPCD: WARN: MAX load reached: load 10.100000/10.000000 at i=1[12-04-2013 13:59:29] NPCD: WARN: MAX load reached: load 10.020000/10.000000 at i=1[root@MN-HOST-NAGXI-1 ~]# tail -25 /usr/local/nagios/var/npcd.log
[12-04-2013 10:43:12] NPCD: WARN: MAX load reached: load 12.680000/10.000000 at i=0[12-04-2013 10:43:27] NPCD: WARN: MAX load reached: load 14.110000/10.000000 at i=1[12-04-2013 10:43:42] NPCD: WARN: MAX load reached: load 12.400000/10.000000 at i=1[12-04-2013 10:43:57] NPCD: WARN: MAX load reached: load 15.340000/10.000000 at i=1[12-04-2013 10:44:12] NPCD: WARN: MAX load reached: load 15.390000/10.000000 at i=1[12-04-2013 10:44:27] NPCD: WARN: MAX load reached: load 12.280000/10.000000 at i=1[12-04-2013 10:45:38] NPCD: WARN: MAX load reached: load 10.600000/10.000000 at i=0[12-04-2013 10:45:53] NPCD: WARN: MAX load reached: load 11.740000/10.000000 at i=1[12-04-2013 10:46:08] NPCD: WARN: MAX load reached: load 12.270000/10.000000 at i=1[12-04-2013 10:46:23] NPCD: WARN: MAX load reached: load 10.390000/10.000000 at i=1[12-04-2013 10:47:02] NPCD: WARN: MAX load reached: load 10.010000/10.000000 at i=12[12-04-2013 10:57:54] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 10:57:54] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386176257.perfdata.service'
[12-04-2013 10:58:56] NPCD: WARN: MAX load reached: load 10.720000/10.000000 at i=0[12-04-2013 10:59:11] NPCD: WARN: MAX load reached: load 10.050000/10.000000 at i=1[12-04-2013 11:01:26] NPCD: WARN: MAX load reached: load 10.700000/10.000000 at i=0[12-04-2013 11:02:15] NPCD: WARN: MAX load reached: load 11.480000/10.000000 at i=0[12-04-2013 11:04:14] NPCD: WARN: MAX load reached: load 11.790000/10.000000 at i=0[12-04-2013 11:07:10] NPCD: WARN: MAX load reached: load 11.010000/10.000000 at i=0[12-04-2013 11:07:25] NPCD: WARN: MAX load reached: load 10.740000/10.000000 at i=1[12-04-2013 11:07:40] NPCD: WARN: MAX load reached: load 10.570000/10.000000 at i=1[12-04-2013 11:08:11] NPCD: WARN: MAX load reached: load 10.480000/10.000000 at i=0[12-04-2013 11:08:49] NPCD: WARN: MAX load reached: load 10.220000/10.000000 at i=0[12-04-2013 11:09:04] NPCD: WARN: MAX load reached: load 12.920000/10.000000 at i=1[12-04-2013 11:09:19] NPCD: WARN: MAX load reached: load 13.410000/10.000000 at i=1[12-04-2013 11:09:34] NPCD: WARN: MAX load reached: load 11.480000/10.000000 at i=1[12-04-2013 11:13:44] NPCD: WARN: MAX load reached: load 10.170000/10.000000 at i=0[12-04-2013 11:13:59] NPCD: WARN: MAX load reached: load 11.490000/10.000000 at i=1[12-04-2013 11:14:14] NPCD: WARN: MAX load reached: load 13.260000/10.000000 at i=1[12-04-2013 11:14:29] NPCD: WARN: MAX load reached: load 13.920000/10.000000 at i=1[12-04-2013 11:14:44] NPCD: WARN: MAX load reached: load 14.150000/10.000000 at i=1[12-04-2013 11:14:59] NPCD: WARN: MAX load reached: load 12.350000/10.000000 at i=1[12-04-2013 11:15:14] NPCD: WARN: MAX load reached: load 11.900000/10.000000 at i=1[12-04-2013 11:15:37] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 11:15:37] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386177218.perfdata.service'
[12-04-2013 11:15:57] NPCD: WARN: MAX load reached: load 11.120000/10.000000 at i=7[12-04-2013 11:16:12] NPCD: WARN: MAX load reached: load 12.870000/10.000000 at i=7[12-04-2013 11:16:27] NPCD: WARN: MAX load reached: load 11.070000/10.000000 at i=7[12-04-2013 11:16:42] NPCD: WARN: MAX load reached: load 11.310000/10.000000 at i=7[12-04-2013 11:16:57] NPCD: WARN: MAX load reached: load 11.290000/10.000000 at i=7[12-04-2013 11:17:12] NPCD: WARN: MAX load reached: load 12.570000/10.000000 at i=7[12-04-2013 11:17:27] NPCD: WARN: MAX load reached: load 12.470000/10.000000 at i=7[12-04-2013 11:17:42] NPCD: WARN: MAX load reached: load 11.620000/10.000000 at i=7[12-04-2013 11:17:57] NPCD: WARN: MAX load reached: load 10.410000/10.000000 at i=7[12-04-2013 11:18:40] NPCD: WARN: MAX load reached: load 11.350000/10.000000 at i=12[12-04-2013 11:18:55] NPCD: WARN: MAX load reached: load 11.070000/10.000000 at i=12[12-04-2013 11:21:22] NPCD: WARN: MAX load reached: load 10.240000/10.000000 at i=0[12-04-2013 11:21:38] NPCD: WARN: MAX load reached: load 10.950000/10.000000 at i=1[12-04-2013 11:21:53] NPCD: WARN: MAX load reached: load 12.020000/10.000000 at i=1[12-04-2013 11:22:08] NPCD: WARN: MAX load reached: load 13.660000/10.000000 at i=1[12-04-2013 11:22:23] NPCD: WARN: MAX load reached: load 12.780000/10.000000 at i=1[12-04-2013 11:22:38] NPCD: WARN: MAX load reached: load 14.720000/10.000000 at i=1[12-04-2013 11:22:53] NPCD: WARN: MAX load reached: load 14.690000/10.000000 at i=1[12-04-2013 11:23:08] NPCD: WARN: MAX load reached: load 13.670000/10.000000 at i=1[12-04-2013 11:23:23] NPCD: WARN: MAX load reached: load 10.780000/10.000000 at i=1[12-04-2013 11:24:03] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 11:24:03] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386177727.perfdata.service'
[12-04-2013 11:24:03] NPCD: WARN: MAX load reached: load 10.720000/10.000000 at i=12[12-04-2013 11:27:35] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 11:27:35] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386178027.perfdata.service'
[12-04-2013 11:27:50] NPCD: WARN: MAX load reached: load 10.120000/10.000000 at i=0[12-04-2013 11:32:36] NPCD: WARN: MAX load reached: load 11.000000/10.000000 at i=0[12-04-2013 11:32:51] NPCD: WARN: MAX load reached: load 10.900000/10.000000 at i=1[12-04-2013 11:33:06] NPCD: WARN: MAX load reached: load 12.730000/10.000000 at i=1[12-04-2013 11:33:21] NPCD: WARN: MAX load reached: load 10.410000/10.000000 at i=1[12-04-2013 11:38:05] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 11:38:05] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386178657.perfdata.service'
[12-04-2013 11:38:20] NPCD: WARN: MAX load reached: load 10.690000/10.000000 at i=0[12-04-2013 11:39:15] NPCD: WARN: MAX load reached: load 10.170000/10.000000 at i=0[12-04-2013 12:04:04] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 12:04:04] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386180217.perfdata.service'
[12-04-2013 12:18:35] NPCD: WARN: MAX load reached: load 10.350000/10.000000 at i=0[12-04-2013 12:18:50] NPCD: WARN: MAX load reached: load 11.720000/10.000000 at i=1[12-04-2013 12:19:05] NPCD: WARN: MAX load reached: load 10.460000/10.000000 at i=1[12-04-2013 12:24:23] NPCD: WARN: MAX load reached: load 12.520000/10.000000 at i=0[12-04-2013 12:24:38] NPCD: WARN: MAX load reached: load 13.840000/10.000000 at i=1[12-04-2013 12:24:53] NPCD: WARN: MAX load reached: load 11.350000/10.000000 at i=1[12-04-2013 12:27:50] NPCD: WARN: MAX load reached: load 10.310000/10.000000 at i=0[12-04-2013 12:43:53] NPCD: WARN: MAX load reached: load 12.270000/10.000000 at i=0[12-04-2013 12:44:09] NPCD: WARN: MAX load reached: load 13.210000/10.000000 at i=1[12-04-2013 12:44:24] NPCD: WARN: MAX load reached: load 11.310000/10.000000 at i=1[12-04-2013 12:46:34] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 12:46:34] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386182767.perfdata.service'
[12-04-2013 12:48:26] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 12:48:26] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386182887.perfdata.service'
[12-04-2013 12:48:41] NPCD: WARN: MAX load reached: load 11.960000/10.000000 at i=0[12-04-2013 12:48:56] NPCD: WARN: MAX load reached: load 10.700000/10.000000 at i=1[12-04-2013 12:49:11] NPCD: WARN: MAX load reached: load 12.080000/10.000000 at i=1[12-04-2013 12:49:26] NPCD: WARN: MAX load reached: load 10.640000/10.000000 at i=1[12-04-2013 12:49:41] NPCD: WARN: MAX load reached: load 11.570000/10.000000 at i=1[12-04-2013 12:59:04] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 12:59:04] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386183517.perfdata.service'
[12-04-2013 12:59:19] NPCD: WARN: MAX load reached: load 11.670000/10.000000 at i=0[12-04-2013 13:07:22] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 13:07:22] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386184027.perfdata.service'
[12-04-2013 13:07:37] NPCD: WARN: MAX load reached: load 10.110000/10.000000 at i=0[12-04-2013 13:18:27] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 13:18:27] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386184687.perfdata.service'
[12-04-2013 13:18:42] NPCD: WARN: MAX load reached: load 10.900000/10.000000 at i=0[12-04-2013 13:34:03] NPCD: WARN: MAX load reached: load 10.860000/10.000000 at i=0[12-04-2013 13:44:04] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 13:44:04] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386186217.perfdata.service'
[12-04-2013 13:44:19] NPCD: WARN: MAX load reached: load 10.400000/10.000000 at i=0[12-04-2013 13:56:18] NPCD: WARN: MAX load reached: load 11.220000/10.000000 at i=0[12-04-2013 13:56:33] NPCD: WARN: MAX load reached: load 10.090000/10.000000 at i=1[12-04-2013 13:58:13] NPCD: WARN: MAX load reached: load 10.190000/10.000000 at i=0[12-04-2013 13:58:28] NPCD: WARN: MAX load reached: load 11.450000/10.000000 at i=1[12-04-2013 13:58:59] NPCD: WARN: MAX load reached: load 10.130000/10.000000 at i=0[12-04-2013 13:59:14] NPCD: WARN: MAX load reached: load 10.100000/10.000000 at i=1[12-04-2013 13:59:29] NPCD: WARN: MAX load reached: load 10.020000/10.000000 at i=1[root@MN-HOST-NAGXI-1 ~]# cls
-bash: cls: command not found
[root@MN-HOST-NAGXI-1 ~]# clear
[root@MN-HOST-NAGXI-1 ~]# tail -25 /usr/local/nagios/var/npcd.log
[12-04-2013 10:43:12] NPCD: WARN: MAX load reached: load 12.680000/10.000000 at i=0[12-04-2013 10:43:27] NPCD: WARN: MAX load reached: load 14.110000/10.000000 at i=1[12-04-2013 10:43:42] NPCD: WARN: MAX load reached: load 12.400000/10.000000 at i=1[12-04-2013 10:43:57] NPCD: WARN: MAX load reached: load 15.340000/10.000000 at i=1[12-04-2013 10:44:12] NPCD: WARN: MAX load reached: load 15.390000/10.000000 at i=1[12-04-2013 10:44:27] NPCD: WARN: MAX load reached: load 12.280000/10.000000 at i=1[12-04-2013 10:45:38] NPCD: WARN: MAX load reached: load 10.600000/10.000000 at i=0[12-04-2013 10:45:53] NPCD: WARN: MAX load reached: load 11.740000/10.000000 at i=1[12-04-2013 10:46:08] NPCD: WARN: MAX load reached: load 12.270000/10.000000 at i=1[12-04-2013 10:46:23] NPCD: WARN: MAX load reached: load 10.390000/10.000000 at i=1[12-04-2013 10:47:02] NPCD: WARN: MAX load reached: load 10.010000/10.000000 at i=12[12-04-2013 10:57:54] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 10:57:54] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386176257.perfdata.service'
[12-04-2013 10:58:56] NPCD: WARN: MAX load reached: load 10.720000/10.000000 at i=0[12-04-2013 10:59:11] NPCD: WARN: MAX load reached: load 10.050000/10.000000 at i=1[12-04-2013 11:01:26] NPCD: WARN: MAX load reached: load 10.700000/10.000000 at i=0[12-04-2013 11:02:15] NPCD: WARN: MAX load reached: load 11.480000/10.000000 at i=0[12-04-2013 11:04:14] NPCD: WARN: MAX load reached: load 11.790000/10.000000 at i=0[12-04-2013 11:07:10] NPCD: WARN: MAX load reached: load 11.010000/10.000000 at i=0[12-04-2013 11:07:25] NPCD: WARN: MAX load reached: load 10.740000/10.000000 at i=1[12-04-2013 11:07:40] NPCD: WARN: MAX load reached: load 10.570000/10.000000 at i=1[12-04-2013 11:08:11] NPCD: WARN: MAX load reached: load 10.480000/10.000000 at i=0[12-04-2013 11:08:49] NPCD: WARN: MAX load reached: load 10.220000/10.000000 at i=0[12-04-2013 11:09:04] NPCD: WARN: MAX load reached: load 12.920000/10.000000 at i=1[12-04-2013 11:09:19] NPCD: WARN: MAX load reached: load 13.410000/10.000000 at i=1[12-04-2013 11:09:34] NPCD: WARN: MAX load reached: load 11.480000/10.000000 at i=1[12-04-2013 11:13:44] NPCD: WARN: MAX load reached: load 10.170000/10.000000 at i=0[12-04-2013 11:13:59] NPCD: WARN: MAX load reached: load 11.490000/10.000000 at i=1[12-04-2013 11:14:14] NPCD: WARN: MAX load reached: load 13.260000/10.000000 at i=1[12-04-2013 11:14:29] NPCD: WARN: MAX load reached: load 13.920000/10.000000 at i=1[12-04-2013 11:14:44] NPCD: WARN: MAX load reached: load 14.150000/10.000000 at i=1[12-04-2013 11:14:59] NPCD: WARN: MAX load reached: load 12.350000/10.000000 at i=1[12-04-2013 11:15:14] NPCD: WARN: MAX load reached: load 11.900000/10.000000 at i=1[12-04-2013 11:15:37] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 11:15:37] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386177218.perfdata.service'
[12-04-2013 11:15:57] NPCD: WARN: MAX load reached: load 11.120000/10.000000 at i=7[12-04-2013 11:16:12] NPCD: WARN: MAX load reached: load 12.870000/10.000000 at i=7[12-04-2013 11:16:27] NPCD: WARN: MAX load reached: load 11.070000/10.000000 at i=7[12-04-2013 11:16:42] NPCD: WARN: MAX load reached: load 11.310000/10.000000 at i=7[12-04-2013 11:16:57] NPCD: WARN: MAX load reached: load 11.290000/10.000000 at i=7[12-04-2013 11:17:12] NPCD: WARN: MAX load reached: load 12.570000/10.000000 at i=7[12-04-2013 11:17:27] NPCD: WARN: MAX load reached: load 12.470000/10.000000 at i=7[12-04-2013 11:17:42] NPCD: WARN: MAX load reached: load 11.620000/10.000000 at i=7[12-04-2013 11:17:57] NPCD: WARN: MAX load reached: load 10.410000/10.000000 at i=7[12-04-2013 11:18:40] NPCD: WARN: MAX load reached: load 11.350000/10.000000 at i=12[12-04-2013 11:18:55] NPCD: WARN: MAX load reached: load 11.070000/10.000000 at i=12[12-04-2013 11:21:22] NPCD: WARN: MAX load reached: load 10.240000/10.000000 at i=0[12-04-2013 11:21:38] NPCD: WARN: MAX load reached: load 10.950000/10.000000 at i=1[12-04-2013 11:21:53] NPCD: WARN: MAX load reached: load 12.020000/10.000000 at i=1[12-04-2013 11:22:08] NPCD: WARN: MAX load reached: load 13.660000/10.000000 at i=1[12-04-2013 11:22:23] NPCD: WARN: MAX load reached: load 12.780000/10.000000 at i=1[12-04-2013 11:22:38] NPCD: WARN: MAX load reached: load 14.720000/10.000000 at i=1[12-04-2013 11:22:53] NPCD: WARN: MAX load reached: load 14.690000/10.000000 at i=1[12-04-2013 11:23:08] NPCD: WARN: MAX load reached: load 13.670000/10.000000 at i=1[12-04-2013 11:23:23] NPCD: WARN: MAX load reached: load 10.780000/10.000000 at i=1[12-04-2013 11:24:03] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 11:24:03] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386177727.perfdata.service'
[12-04-2013 11:24:03] NPCD: WARN: MAX load reached: load 10.720000/10.000000 at i=12[12-04-2013 11:27:35] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 11:27:35] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386178027.perfdata.service'
[12-04-2013 11:27:50] NPCD: WARN: MAX load reached: load 10.120000/10.000000 at i=0[12-04-2013 11:32:36] NPCD: WARN: MAX load reached: load 11.000000/10.000000 at i=0[12-04-2013 11:32:51] NPCD: WARN: MAX load reached: load 10.900000/10.000000 at i=1[12-04-2013 11:33:06] NPCD: WARN: MAX load reached: load 12.730000/10.000000 at i=1[12-04-2013 11:33:21] NPCD: WARN: MAX load reached: load 10.410000/10.000000 at i=1[12-04-2013 11:38:05] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 11:38:05] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386178657.perfdata.service'
[12-04-2013 11:38:20] NPCD: WARN: MAX load reached: load 10.690000/10.000000 at i=0[12-04-2013 11:39:15] NPCD: WARN: MAX load reached: load 10.170000/10.000000 at i=0[12-04-2013 12:04:04] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 12:04:04] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386180217.perfdata.service'
[12-04-2013 12:18:35] NPCD: WARN: MAX load reached: load 10.350000/10.000000 at i=0[12-04-2013 12:18:50] NPCD: WARN: MAX load reached: load 11.720000/10.000000 at i=1[12-04-2013 12:19:05] NPCD: WARN: MAX load reached: load 10.460000/10.000000 at i=1[12-04-2013 12:24:23] NPCD: WARN: MAX load reached: load 12.520000/10.000000 at i=0[12-04-2013 12:24:38] NPCD: WARN: MAX load reached: load 13.840000/10.000000 at i=1[12-04-2013 12:24:53] NPCD: WARN: MAX load reached: load 11.350000/10.000000 at i=1[12-04-2013 12:27:50] NPCD: WARN: MAX load reached: load 10.310000/10.000000 at i=0[12-04-2013 12:43:53] NPCD: WARN: MAX load reached: load 12.270000/10.000000 at i=0[12-04-2013 12:44:09] NPCD: WARN: MAX load reached: load 13.210000/10.000000 at i=1[12-04-2013 12:44:24] NPCD: WARN: MAX load reached: load 11.310000/10.000000 at i=1[12-04-2013 12:46:34] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 12:46:34] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386182767.perfdata.service'
[12-04-2013 12:48:26] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 12:48:26] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386182887.perfdata.service'
[12-04-2013 12:48:41] NPCD: WARN: MAX load reached: load 11.960000/10.000000 at i=0[12-04-2013 12:48:56] NPCD: WARN: MAX load reached: load 10.700000/10.000000 at i=1[12-04-2013 12:49:11] NPCD: WARN: MAX load reached: load 12.080000/10.000000 at i=1[12-04-2013 12:49:26] NPCD: WARN: MAX load reached: load 10.640000/10.000000 at i=1[12-04-2013 12:49:41] NPCD: WARN: MAX load reached: load 11.570000/10.000000 at i=1[12-04-2013 12:59:04] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 12:59:04] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386183517.perfdata.service'
[12-04-2013 12:59:19] NPCD: WARN: MAX load reached: load 11.670000/10.000000 at i=0[12-04-2013 13:07:22] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 13:07:22] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386184027.perfdata.service'
[12-04-2013 13:07:37] NPCD: WARN: MAX load reached: load 10.110000/10.000000 at i=0[12-04-2013 13:18:27] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 13:18:27] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386184687.perfdata.service'
[12-04-2013 13:18:42] NPCD: WARN: MAX load reached: load 10.900000/10.000000 at i=0[12-04-2013 13:34:03] NPCD: WARN: MAX load reached: load 10.860000/10.000000 at i=0[12-04-2013 13:44:04] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 13:44:04] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386186217.perfdata.service'
[12-04-2013 13:44:19] NPCD: WARN: MAX load reached: load 10.400000/10.000000 at i=0[12-04-2013 13:56:18] NPCD: WARN: MAX load reached: load 11.220000/10.000000 at i=0[12-04-2013 13:56:33] NPCD: WARN: MAX load reached: load 10.090000/10.000000 at i=1[12-04-2013 13:58:13] NPCD: WARN: MAX load reached: load 10.190000/10.000000 at i=0[12-04-2013 13:58:28] NPCD: WARN: MAX load reached: load 11.450000/10.000000 at i=1[12-04-2013 13:58:59] NPCD: WARN: MAX load reached: load 10.130000/10.000000 at i=0[12-04-2013 13:59:14] NPCD: WARN: MAX load reached: load 10.100000/10.000000 at i=1[12-04-2013 13:59:29] NPCD: WARN: MAX load reached: load 10.020000/10.000000 at i=1
Would anything else help?
Re: NagiosXI - Change command, get NaN in graph
Posted: Wed Dec 04, 2013 5:28 pm
by abrist
Alright. You are experiencing a rather common issue. You need to increase the timeout and load thresholds for the performance data reaper.
Edit the following file:
Code: Select all
/usr/local/nagios/etc/pnp/process_perfdata.cfg
Change:
To:
Also edit this file:
Code: Select all
/usr/local/nagios/etc/pnp/npcd.cfg
Change:
To:
Now restart npcd:
Code: Select all
service npcd stop
killall -9 npcd
service npcd start
Re: NagiosXI - Change command, get NaN in graph
Posted: Wed Dec 04, 2013 6:11 pm
by JumpingSnake
I made the two changes and then restarted the service, but I still see the same results in the performance graph. Does it usually take more than 30 min to catch back up?
Re: NagiosXI - Change command, get NaN in graph
Posted: Thu Dec 05, 2013 10:38 am
by abrist
It may take even longer as it has to work through the backlog. Can you check the logs once again and post the output here?
Re: NagiosXI - Change command, get NaN in graph
Posted: Thu Dec 05, 2013 11:58 am
by JumpingSnake
I just checked again this morning, still nan. The server "feels" much faster after rebooting the service yesterday, so that's good at least
Here are the logs again:
perfdata.log:
Code: Select all
2013-12-04 13:07:22 [17060] [0] *** process_perfdata.pl terminated on signal ALRM
2013-12-04 13:18:27 [27619] [0] *** TIMEOUT: Timeout after 5 secs. ***
2013-12-04 13:18:27 [27619] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2013-12-04 13:18:27 [27619] [0] *** TIMEOUT: Please check your npcd.cfg
2013-12-04 13:18:27 [27619] [0] *** TIMEOUT: /usr/local/nagios/var/spool/perfdata//1386184687.perfdata.service-PID-27619 deleted
2013-12-04 13:18:27 [27619] [0] *** Timeout while processing Host: "<host1>" Service: "CPU"
2013-12-04 13:18:27 [27619] [0] *** process_perfdata.pl terminated on signal ALRM
2013-12-04 13:44:03 [18871] [0] *** TIMEOUT: Timeout after 5 secs. ***
2013-12-04 13:44:03 [18871] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2013-12-04 13:44:03 [18871] [0] *** TIMEOUT: Please check your npcd.cfg
2013-12-04 13:44:03 [18871] [0] *** TIMEOUT: /usr/local/nagios/var/spool/perfdata//1386186217.perfdata.service-PID-18871 deleted
2013-12-04 13:44:03 [18871] [0] *** Timeout while processing Host: "<host2>" Service: "Dell_-_Check_OMSA"
2013-12-04 13:44:03 [18871] [0] *** process_perfdata.pl terminated on signal ALRM
2013-12-04 14:04:02 [5077] [0] *** TIMEOUT: Timeout after 5 secs. ***
2013-12-04 14:04:02 [5077] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2013-12-04 14:04:02 [5077] [0] *** TIMEOUT: Please check your npcd.cfg
2013-12-04 14:04:02 [5077] [0] *** TIMEOUT: /usr/local/nagios/var/spool/perfdata//1386187417.perfdata.service-PID-5077 deleted
2013-12-04 14:04:02 [5077] [0] *** Timeout while processing Host: "<host3>" Service: "Disk_Usage"
2013-12-04 14:04:02 [5077] [0] *** process_perfdata.pl terminated on signal ALRM
2013-12-04 14:17:55 [17835] [0] *** TIMEOUT: Timeout after 5 secs. ***
2013-12-04 14:17:55 [17835] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2013-12-04 14:17:55 [17835] [0] *** TIMEOUT: Please check your npcd.cfg
2013-12-04 14:17:55 [17835] [0] *** TIMEOUT: /usr/local/nagios/var/spool/perfdata//1386188257.perfdata.service-PID-17835 deleted
2013-12-04 14:17:55 [17835] [0] *** Timeout while processing Host: "<host4>" Service: "Disk_Usage"
2013-12-04 14:17:55 [17835] [0] *** process_perfdata.pl terminated on signal ALRM
npcd.log:
Code: Select all
[12-04-2013 11:27:35] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386178027.perfdata.service'
[12-04-2013 11:27:50] NPCD: WARN: MAX load reached: load 10.120000/10.000000 at i=0[12-04-2013 11:32:36] NPCD: WARN: MAX load reached: load 11.000000/10.000000 at i=0[12-04-2013 11:32:51] NPCD: WARN: MAX load reached: load 10.900000/10.000000 at i=1[12-04-2013 11:33:06] NPCD: WARN: MAX load reached: load 12.730000/10.000000 at i=1[12-04-2013 11:33:21] NPCD: WARN: MAX load reached: load 10.410000/10.000000 at i=1[12-04-2013 11:38:05] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 11:38:05] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386178657.perfdata.service'
[12-04-2013 11:38:20] NPCD: WARN: MAX load reached: load 10.690000/10.000000 at i=0[12-04-2013 11:39:15] NPCD: WARN: MAX load reached: load 10.170000/10.000000 at i=0[12-04-2013 12:04:04] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 12:04:04] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386180217.perfdata.service'
[12-04-2013 12:18:35] NPCD: WARN: MAX load reached: load 10.350000/10.000000 at i=0[12-04-2013 12:18:50] NPCD: WARN: MAX load reached: load 11.720000/10.000000 at i=1[12-04-2013 12:19:05] NPCD: WARN: MAX load reached: load 10.460000/10.000000 at i=1[12-04-2013 12:24:23] NPCD: WARN: MAX load reached: load 12.520000/10.000000 at i=0[12-04-2013 12:24:38] NPCD: WARN: MAX load reached: load 13.840000/10.000000 at i=1[12-04-2013 12:24:53] NPCD: WARN: MAX load reached: load 11.350000/10.000000 at i=1[12-04-2013 12:27:50] NPCD: WARN: MAX load reached: load 10.310000/10.000000 at i=0[12-04-2013 12:43:53] NPCD: WARN: MAX load reached: load 12.270000/10.000000 at i=0[12-04-2013 12:44:09] NPCD: WARN: MAX load reached: load 13.210000/10.000000 at i=1[12-04-2013 12:44:24] NPCD: WARN: MAX load reached: load 11.310000/10.000000 at i=1[12-04-2013 12:46:34] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 12:46:34] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386182767.perfdata.service'
[12-04-2013 12:48:26] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 12:48:26] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386182887.perfdata.service'
[12-04-2013 12:48:41] NPCD: WARN: MAX load reached: load 11.960000/10.000000 at i=0[12-04-2013 12:48:56] NPCD: WARN: MAX load reached: load 10.700000/10.000000 at i=1[12-04-2013 12:49:11] NPCD: WARN: MAX load reached: load 12.080000/10.000000 at i=1[12-04-2013 12:49:26] NPCD: WARN: MAX load reached: load 10.640000/10.000000 at i=1[12-04-2013 12:49:41] NPCD: WARN: MAX load reached: load 11.570000/10.000000 at i=1[12-04-2013 12:59:04] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 12:59:04] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386183517.perfdata.service'
[12-04-2013 12:59:19] NPCD: WARN: MAX load reached: load 11.670000/10.000000 at i=0[12-04-2013 13:07:22] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 13:07:22] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386184027.perfdata.service'
[12-04-2013 13:07:37] NPCD: WARN: MAX load reached: load 10.110000/10.000000 at i=0[12-04-2013 13:18:27] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 13:18:27] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386184687.perfdata.service'
[12-04-2013 13:18:42] NPCD: WARN: MAX load reached: load 10.900000/10.000000 at i=0[12-04-2013 13:34:03] NPCD: WARN: MAX load reached: load 10.860000/10.000000 at i=0[12-04-2013 13:44:04] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 13:44:04] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386186217.perfdata.service'
[12-04-2013 13:44:19] NPCD: WARN: MAX load reached: load 10.400000/10.000000 at i=0[12-04-2013 13:56:18] NPCD: WARN: MAX load reached: load 11.220000/10.000000 at i=0[12-04-2013 13:56:33] NPCD: WARN: MAX load reached: load 10.090000/10.000000 at i=1[12-04-2013 13:58:13] NPCD: WARN: MAX load reached: load 10.190000/10.000000 at i=0[12-04-2013 13:58:28] NPCD: WARN: MAX load reached: load 11.450000/10.000000 at i=1[12-04-2013 13:58:59] NPCD: WARN: MAX load reached: load 10.130000/10.000000 at i=0[12-04-2013 13:59:14] NPCD: WARN: MAX load reached: load 10.100000/10.000000 at i=1[12-04-2013 13:59:29] NPCD: WARN: MAX load reached: load 10.020000/10.000000 at i=1[12-04-2013 14:04:03] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 14:04:03] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386187417.perfdata.service'
[12-04-2013 14:04:18] NPCD: WARN: MAX load reached: load 12.230000/10.000000 at i=0[12-04-2013 14:04:33] NPCD: WARN: MAX load reached: load 13.490000/10.000000 at i=1[12-04-2013 14:04:48] NPCD: WARN: MAX load reached: load 11.220000/10.000000 at i=1[12-04-2013 14:07:15] NPCD: WARN: MAX load reached: load 10.290000/10.000000 at i=0[12-04-2013 14:07:30] NPCD: WARN: MAX load reached: load 10.760000/10.000000 at i=1[12-04-2013 14:07:45] NPCD: WARN: MAX load reached: load 10.370000/10.000000 at i=1[12-04-2013 14:08:00] NPCD: WARN: MAX load reached: load 11.550000/10.000000 at i=1[12-04-2013 14:08:15] NPCD: WARN: MAX load reached: load 11.190000/10.000000 at i=1[12-04-2013 14:08:30] NPCD: WARN: MAX load reached: load 12.350000/10.000000 at i=1[12-04-2013 14:13:22] NPCD: WARN: MAX load reached: load 11.020000/10.000000 at i=0[12-04-2013 14:13:37] NPCD: WARN: MAX load reached: load 11.360000/10.000000 at i=1[12-04-2013 14:13:52] NPCD: WARN: MAX load reached: load 10.810000/10.000000 at i=1[12-04-2013 14:17:55] NPCD: ERROR: Executed command exits with return code '7'
[12-04-2013 14:17:55] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1386188257.perfdata.service'
[12-04-2013 14:18:10] NPCD: WARN: MAX load reached: load 10.640000/10.000000 at i=0[12-04-2013 14:18:25] NPCD: WARN: MAX load reached: load 11.600000/10.000000 at i=1[12-04-2013 14:18:40] NPCD: WARN: MAX load reached: load 11.560000/10.000000 at i=1[12-04-2013 14:18:55] NPCD: WARN: MAX load reached: load 10.430000/10.000000 at i=1[12-04-2013 14:31:55] NPCD: Caught Termination Signal - Hasta la vista... baby
[12-04-2013 14:32:21] NPCD: npcd Daemon (0.4.14) started with PID=31023
[12-04-2013 14:32:21] NPCD: Please have a look at 'npcd -V' to get license information
[12-04-2013 14:32:21] NPCD: HINT: load_threshold is enabled - ('30.000000')
Are your thoughts that I need to set the values you had me change to an even higher number?
Re: NagiosXI - Change command, get NaN in graph
Posted: Thu Dec 05, 2013 12:04 pm
by abrist
JumpingSnake wrote:Are your thoughts that I need to set the values you had me change to an even higher number?
Nope, all those error are from yesterday. I presume you still do not have graphing working though?
Re: NagiosXI - Change command, get NaN in graph
Posted: Thu Dec 05, 2013 12:07 pm
by JumpingSnake
Correct, still no numbers for those graphs as of yet.