Nagios Support Forum

Code: Select all

[/modules]

; CheckDisk - CheckDisk can check various file and disk related things. The current version has commands to check Size of hard drives and directories.
CheckDisk = 1

; Event log Checker. - Check for errors and warnings in the event log. This is only supported through NRPE so if you plan to use only NSClient this wont help you at all.
CheckEventLog = 1

; Check External Scripts - A simple wrapper to run external scripts and batch files.
CheckExternalScripts = 1

; Helper function - Various helper function to extend other checks. This is also only supported through NRPE.
CheckHelpers = 1

; Check NSCP - Checkes the state of the agent
CheckNSCP = 1

; CheckSystem - Various system related checks, such as CPU load, process state, service state memory usage and PDH counters.
CheckSystem = 1

; CheckWMI - CheckWMI can check various file and disk related things. The current version has commands to check Size of hard drives and directories.
CheckWMI = 1

; NRPE server - A simple server that listens for incoming NRPE connection and handles them. NRPE is preferred over NSClient as it is more flexible. You can of cource use both NSClient and NRPE.
NRPEServer = 1

; NSCAClient - Passive check support (needs NSCA on nagios server). Avalible crypto are: {0=No Encryption (not safe), 1=XOR, 2=DES, 3=DES-EDE3, 4=CAST-128, 6=XTEA, 8=Blowfish, 9=Twofish, 11=RC2, 14=AES, 15=AES, 16=AES, 20=Serpent, 23=GOST}
NSCAClient = 1

; NSClient server - A simple server that listens for incoming NSClient (check_nt) connection and handles them. Although NRPE is the preferred method NSClient is fully supported and can be used for simplicity or for compatibility.
NSClientServer = 1


; Undocumented section
[/settings/default]

; ALLOWED HOSTS - A comaseparated list of allowed hosts. You can use netmasks (/ syntax) or * to create ranges.
allowed hosts = ............


; Section for NRPE (NRPEListener.dll) (check_nrpe) protocol options.
[/settings/NRPE/server]
; COMMAND ARGUMENT PROCESSING - This option determines whether or not the we will allow clients to specify arguments to commands that are executed.
allow arguments = true
; COMMAND ALLOW NASTY META CHARS - This option determines whether or not the we will allow clients to specify nasty (as in |`&><'"\[]{}) characters in arguments.
allow nasty characters = true
; ALLOWED HOSTS - A comaseparated list of allowed hosts. You can use netmasks (/ syntax) or * to create ranges. parent for this key is found under: /settings/default this is marked as advanced in favour of the parent.
#allowed hosts = ..........
; PORT NUMBER - Port to use for NRPE.
port = 5666
.
.
.
[/settings/external scripts]
#allow arguments=true
#allow nasty characters = true

; A list of aliases available. An alias is an internal command that has been "wrapped" (to add arguments). Be careful so you don't create loops (ie check_loop=check_a, check_a=check_loop)
[/settings/external scripts/alias]


; A list of scripts available to run from the CheckExternalScripts module. Syntax is: <command>=<script> <arguments>
[/settings/external scripts/scripts]
check_jmxeval = scripts\check_jmxeval.bat scripts\jmxeval_jb.xml
runcmd = "scripts\runcmd.bat"

; A list of wrappped scripts (ie. using the template mechanism)
[/settings/external scripts/wrapped scripts]


; A list of templates for wrapped scripts
[/settings/external scripts/wrappings]

Code: Select all

check_jmxeval = "scripts\\check_jmxeval.bat" "scripts\\jmxeval_jb.xml"

Code: Select all

check_jmxeval = cmd /c echo “scripts\\check_jmxeval.bat" "scripts\\jmxeval_jb.xml" ; exit($lastexitcode) | powershell.exe -command –

Code: Select all

JMXEval MemHeap OK - heapMemoryUsedPercent is 21.24

Code: Select all

..\..\..\..\trunk\modules\CheckExternalScripts\CheckExternalScripts.cpp:229: Arguments: /c echo scripts\check_jmxeval.bat scripts\jmxeval_jb.xml ; exit($lastexitcode) | powershell.exe -command –

Code: Select all

>> C:\log.txt

Code: Select all

JMXEval MemHeap OK - heapMemoryUsedPercent is 18.41 | heapMemoryUsedPercent=18.41;90;95 time=0.0s

Code: Select all

..\..\..\..\trunk\modules\CheckExternalScripts\CheckExternalScripts.cpp:229: Arguments: scripts\jmxeval_jb.xml

Code: Select all

check_jmxeval = "scripts\\check_jmxeval.bat" "scripts\\jmxeval_jb.xml"

Code: Select all

check_jmxeval = scripts\check_jmxeval.bat

Code: Select all

e:d:\source\nscp\trunk\modules\checkexternalscripts\commands.hpp:91: Failed to parse arguments for command 'check_jmxeval', using old split string method: unknown escape sequence: scripts\check_jmxeval.bat scripts\jmxeval_jb.xml

Code: Select all

check_jmxeval = scripts\check_jmxeval.bat scripts\jmxeval_jb.xml

Code: Select all

check_jmxeval = "scripts\\check_jmxeval.bat" "scripts\\jmxeval_jb.xml"

Code: Select all

JMXEval MemHeap OK - heapMemoryUsedPercent is 18.41

Code: Select all

..\..\..\..\trunk\modules\CheckExternalScripts\CheckExternalScripts.cpp:229: Arguments: scripts\jmxeval_jb.xml

Code: Select all

>> C:\log.txt

Code: Select all

check_jmxeval = scripts\check_jmxeval.bat scripts\jmxeval_jb.xml >> C:\log.txt

Code: Select all

@echo off

@if "%OS%" == "Windows_NT" setlocal
@pushd %~dp0
@set BASE_DIR=%cd%
@popd
set BASE_DIR=%BASE_DIR%\lib\jmxeval-1.2.6
set LIB_DIR=%BASE_DIR%\lib
call C:\jboss-as-7.1.1.Final\bin\jmx_setup.bat
set CLASSPATH=%CLASSPATH%;%BASE_DIR%\jmxeval-1.2.6.jar;%LIB_DIR%\args4j-2.0.16.jar
rem echo %CLASSPATH%
%JAVA_HOME%\bin\java -classpath "%CLASSPATH%" com.adahas.tools.jmxeval.App %*

Code: Select all

<?xml version="1.0"?>
<jmxeval:jmxeval xmlns:jmxeval="http://www.adahas.com/schema/jmxeval-1.2" 
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">

  <!--
    connect to Java process running on 'localhost' having JMX agent exposed on port '9010'
    using username 'myUser' and password 'myPassword'
   -->
  <connection url="service:jmx:remoting-jmx://localhost:xxxx" 
      username="xxx" password="xxx">
      
      <eval name="MemHeap">
      <query var="heapMemoryUsed" objectName="java.lang:type=Memory" compositeAttribute="HeapMemoryUsage" attribute="used" />
      <query var="heapMemoryMax" objectName="java.lang:type=Memory" compositeAttribute="HeapMemoryUsage" attribute="max" />
      <expr var="heapMemoryUsedPercent" expression="${heapMemoryUsed}/${heapMemoryMax}*100" />
      
      <check useVar="heapMemoryUsedPercent" warning="92" critical="95" message="heapMemoryUsedPercent is ${heapMemoryUsedPercent}">
        <perf />
      </check>
    </eval>
  </connection>
</jmxeval:jmxeval>

Code: Select all

@echo off

@if "%OS%" == "Windows_NT" setlocal
@pushd %~dp0
@set BASE_DIR=%cd%
@popd
set BASE_DIR=%BASE_DIR%\lib\jmxeval-1.2.6
set LIB_DIR=%BASE_DIR%\lib
call C:\jboss-as-7.1.1.Final\bin\jmx_setup.bat
set CLASSPATH=%CLASSPATH%;%BASE_DIR%\jmxeval-1.2.6.jar;%LIB_DIR%\args4j-2.0.16.jar
rem echo %CLASSPATH%
%JAVA_HOME%\bin\java -classpath "%CLASSPATH%" com.adahas.tools.jmxeval.App .\jmxeval_jb.xml

Code: Select all

@echo off

@if "%OS%" == "Windows_NT" setlocal
@pushd %~dp0
@set BASE_DIR=%cd%
@popd
set BASE_DIR=%BASE_DIR%\lib\jmxeval-1.2.6
set LIB_DIR=%BASE_DIR%\lib
call C:\jboss-as-7.1.1.Final\bin\jmx_setup.bat
set CLASSPATH=%CLASSPATH%;%BASE_DIR%\jmxeval-1.2.6.jar;%LIB_DIR%\args4j-2.0.16.jar
rem echo %CLASSPATH%
%JAVA_HOME%\bin\java -classpath "%CLASSPATH%" com.adahas.tools.jmxeval.App scripts\jmxeval_jb.xml

Code: Select all

@echo off

@if "%OS%" == "Windows_NT" setlocal
@pushd %~dp0
@set BASE_DIR=%cd%
@popd
set BASE_DIR=%BASE_DIR%\lib\jmxeval-1.2.6
set LIB_DIR=%BASE_DIR%\lib
call C:\jboss-as-7.1.1.Final\bin\jmx_setup.bat
set CLASSPATH=%CLASSPATH%;%BASE_DIR%\jmxeval-1.2.6.jar;%LIB_DIR%\args4j-2.0.16.jar
rem echo %CLASSPATH%
%JAVA_HOME%\bin\java -classpath "%CLASSPATH%" com.adahas.tools.jmxeval.App "C:\program files\nsclient\scripts\jmxeval_jb.xml"

Code: Select all

check_jmxeval = scripts\check_jmxeval.bat 
instead of:
check_jmxeval = scripts\check_jmxeval.bat scripts\jmxeval_jb.xml