Nagios Support Forum

I just noticed that if I go into graph explorer of display or show top producers, noting is displayed.

Are the graphs displaying anywhere else?
What version of XI are you running?

I am running Nagios XI 2014R1.5. No graphs under graph explorer or under each service

Can you increase the debug level as specified in the following faq entries, wait 15 minutes and then get a large tail and post it here. Do not forget to decrease the log level once you have the tails!
http://support.nagios.com/wiki/index.ph ... leshooting
Wait 15 minutes, run the following tails:

Are graphs being displayed elsewhere?:

Home > Service Detail > [click the little performance graph icon on one of your services that has been checked at least 3 times]

Home > Service Detail > [select a service, then go to it's performance graphs page]

Are you using the highcharts graphs, or the pnp graphs from Admin > Manage System Config.

[root@utlp1362 var]# tail -50 perfdata.log
2014-12-01 11:03:47 [20225] [0] *** Timeout while processing Host: "webd1037" Service: "Memory_Usage"
2014-12-01 11:03:47 [20225] [0] *** process_perfdata.pl terminated on signal ALRM
2014-12-01 11:04:07 [20670] [0] *** TIMEOUT: Timeout after 5 secs. ***
2014-12-01 11:04:07 [20670] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2014-12-01 11:04:07 [20670] [0] *** TIMEOUT: Please check your npcd.cfg
2014-12-01 11:04:07 [20670] [0] *** TIMEOUT: /usr/local/nagios/var/spool/perfdata//1417453431.perfdata.service-PID-20670 deleted
2014-12-01 11:04:07 [20670] [0] *** Timeout while processing Host: "ASWDTCB02" Service: "Ping"
2014-12-01 11:04:07 [20670] [0] *** process_perfdata.pl terminated on signal ALRM
2014-12-01 11:04:27 [21019] [0] *** TIMEOUT: Timeout after 5 secs. ***
2014-12-01 11:04:27 [21019] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2014-12-01 11:04:27 [21019] [0] *** TIMEOUT: Please check your npcd.cfg
2014-12-01 11:04:27 [21019] [0] *** TIMEOUT: /usr/local/nagios/var/spool/perfdata//1417453445.perfdata.service-PID-21019 deleted
2014-12-01 11:04:27 [21019] [0] *** Timeout while processing Host: "utlp4517.ama-assn.org" Service: "HTTP"
2014-12-01 11:04:27 [21019] [0] *** process_perfdata.pl terminated on signal ALRM
2014-12-01 11:04:47 [21391] [0] *** TIMEOUT: Timeout after 5 secs. ***
2014-12-01 11:04:47 [21391] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2014-12-01 11:04:47 [21391] [0] *** TIMEOUT: Please check your npcd.cfg
2014-12-01 11:04:47 [21391] [0] *** TIMEOUT: /usr/local/nagios/var/spool/perfdata//1417453475.perfdata.service-PID-21391 deleted
2014-12-01 11:04:47 [21391] [0] *** Timeout while processing Host: "appt1240" Service: "__Disk_Usage"
2014-12-01 11:04:47 [21391] [0] *** process_perfdata.pl terminated on signal ALRM
2014-12-01 11:06:02 [22882] [0] *** TIMEOUT: Timeout after 5 secs. ***
2014-12-01 11:06:02 [22882] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2014-12-01 11:06:02 [22882] [0] *** TIMEOUT: Please check your npcd.cfg
2014-12-01 11:06:02 [22882] [0] *** TIMEOUT: /usr/local/nagios/var/spool/perfdata//1417453551.perfdata.service-PID-22882 deleted
2014-12-01 11:06:02 [22882] [0] *** Timeout while processing Host: "appp1331.ama-assn.org" Service: "Memory_Usage"
2014-12-01 11:06:02 [22882] [0] *** process_perfdata.pl terminated on signal ALRM
2014-12-01 11:06:02 [22884] [0] *** TIMEOUT: Timeout after 5 secs. ***
2014-12-01 11:06:02 [22884] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2014-12-01 11:06:02 [22884] [0] *** TIMEOUT: Please check your npcd.cfg
2014-12-01 11:06:02 [22884] [0] *** TIMEOUT: /usr/local/nagios/var/spool/perfdata//1417453535.perfdata.service-PID-22884 deleted
2014-12-01 11:06:02 [22884] [0] *** Timeout while processing Host: "webt1223" Service: "Ping"
2014-12-01 11:06:02 [22884] [0] *** process_perfdata.pl terminated on signal ALRM
2014-12-01 11:08:03 [25305] [0] *** TIMEOUT: Timeout after 5 secs. ***
2014-12-01 11:08:03 [25305] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2014-12-01 11:08:03 [25305] [0] *** TIMEOUT: Please check your npcd.cfg
2014-12-01 11:08:03 [25305] [0] *** TIMEOUT: /usr/local/nagios/var/spool/perfdata//1417453666.perfdata.service-PID-25305 deleted
2014-12-01 11:08:03 [25305] [0] *** Timeout while processing Host: "ecomreportstest.ama-assn.org" Service: "DNS_IP_Match"
2014-12-01 11:08:03 [25305] [0] *** process_perfdata.pl terminated on signal ALRM
2014-12-01 11:09:51 [27640] [0] *** TIMEOUT: Timeout after 5 secs. ***
2014-12-01 11:09:51 [27640] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2014-12-01 11:09:51 [27640] [0] *** TIMEOUT: Please check your npcd.cfg
2014-12-01 11:09:51 [27640] [0] *** TIMEOUT: /usr/local/nagios/var/spool/perfdata//1417453770.perfdata.service-PID-27640 deleted
2014-12-01 11:09:51 [27640] [0] *** Timeout while processing Host: "appp1244" Service: "_var_Interwoven_Disk_Usage"
2014-12-01 11:09:51 [27640] [0] *** process_perfdata.pl terminated on signal ALRM
2014-12-01 11:11:03 [29032] [0] *** TIMEOUT: Timeout after 5 secs. ***
2014-12-01 11:11:03 [29032] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2014-12-01 11:11:03 [29032] [0] *** TIMEOUT: Please check your npcd.cfg
2014-12-01 11:11:03 [29032] [0] *** TIMEOUT: /usr/local/nagios/var/spool/perfdata//1417453846.perfdata.service-PID-29032 deleted
2014-12-01 11:11:03 [29032] [0] *** Timeout while processing Host: "rdbt1171.ama-assn.org" Service: "CPU_Stats"
2014-12-01 11:11:03 [29032] [0] *** process_perfdata.pl terminated on signal ALRM

You are hitting the TIMEOUT limit. Please follow the FAQ entry below in order to increase the timeout setting:
http://support.nagios.com/wiki/index.ph ... ta_Timeout