Nagios Support Forum

I am unable to use the router/switch wizard after upgrade to 2.0.

System:

Nagios XI Version : 2014R2.0
bexar-nms-01.bexarmetro.org 2.6.32-431.29.2.el6.x86_64 x86_64
CentOS release 6.6 (Final)
Gnome is not installed
Apache Information

PHP Version: 5.3.3
Agent: Mozilla/5.0 (Windows NT 6.3; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/39.0.2171.65 Safari/537.36
Server Name: 10.4.199.12
Server Address: 10.4.199.12
Server Port: 80
Date/Time

PHP Timezone: America/Chicago
PHP Time: Wed, 19 Nov 2014 20:02:39 -0600
System Time: Wed, 19 Nov 2014 20:02:39 -0600
Nagios XI Data

License ends in: MMNPUT

nagios (pid 3274) is running...
NPCD running (pid 1820).
ndo2db (pid 1917) is running...
CPU Load 15: 0.35
Total Hosts: 72
Total Services: 517

[root@bexar-nms-01 ~]# /usr/bin/cfgmaker --show-op-down --noreversedns --zero-speed '100000000' 'BE+@rR3@[email protected]:::::1'
--base: Get Device Info on BE+@rR3@[email protected]:::::1
--base: Vendor Id: cisco
--base: Populating confcache
--base: Get Interface Info
--base: Walking ifIndex
--snpd: BE+@rR3@[email protected]:::::1 -> 1 -> ifIndex = 1
--snpd: BE+@rR3@[email protected]:::::1 -> 2 -> ifIndex = 2
--snpd: BE+@rR3@[email protected]:::::1 -> 3 -> ifIndex = 3
--snpd: BE+@rR3@[email protected]:::::1 -> 4 -> ifIndex = 4
--snpd: BE+@rR3@[email protected]:::::1 -> 5 -> ifIndex = 5
--snpd: BE+@rR3@[email protected]:::::1 -> 6 -> ifIndex = 6
--snpd: BE+@rR3@[email protected]:::::1 -> 7 -> ifIndex = 7
--snpd: BE+@rR3@[email protected]:::::1 -> 8 -> ifIndex = 8
--snpd: BE+@rR3@[email protected]:::::1 -> 9 -> ifIndex = 9
--snpd: BE+@rR3@[email protected]:::::1 -> 10 -> ifIndex = 10
--snpd: BE+@rR3@[email protected]:::::1 -> 11 -> ifIndex = 11
--base: Walking ifType
--snpd: BE+@rR3@[email protected]:::::1 -> 1 -> ifType = 6
--snpd: BE+@rR3@[email protected]:::::1 -> 2 -> ifType = 6
--snpd: BE+@rR3@[email protected]:::::1 -> 3 -> ifType = 6
--snpd: BE+@rR3@[email protected]:::::1 -> 4 -> ifType = 6
--snpd: BE+@rR3@[email protected]:::::1 -> 5 -> ifType = 6
--snpd: BE+@rR3@[email protected]:::::1 -> 6 -> ifType = 1
--snpd: BE+@rR3@[email protected]:::::1 -> 7 -> ifType = 18
--snpd: BE+@rR3@[email protected]:::::1 -> 8 -> ifType = 18
--snpd: BE+@rR3@[email protected]:::::1 -> 9 -> ifType = 22
--snpd: BE+@rR3@[email protected]:::::1 -> 10 -> ifType = 22
--snpd: BE+@rR3@[email protected]:::::1 -> 11 -> ifType = 24
--base: Walking ifAdminStatus
--snpd: BE+@rR3@[email protected]:::::1 -> 1 -> ifAdminStatus = 1
--snpd: BE+@rR3@[email protected]:::::1 -> 2 -> ifAdminStatus = 1
--snpd: BE+@rR3@[email protected]:::::1 -> 3 -> ifAdminStatus = 2
--snpd: BE+@rR3@[email protected]:::::1 -> 4 -> ifAdminStatus = 1
--snpd: BE+@rR3@[email protected]:::::1 -> 5 -> ifAdminStatus = 1
--snpd: BE+@rR3@[email protected]:::::1 -> 6 -> ifAdminStatus = 1
--snpd: BE+@rR3@[email protected]:::::1 -> 7 -> ifAdminStatus = 1
--snpd: BE+@rR3@[email protected]:::::1 -> 8 -> ifAdminStatus = 1
--snpd: BE+@rR3@[email protected]:::::1 -> 9 -> ifAdminStatus = 2
--snpd: BE+@rR3@[email protected]:::::1 -> 10 -> ifAdminStatus = 2
--snpd: BE+@rR3@[email protected]:::::1 -> 11 -> ifAdminStatus = 1
--base: Walking ifOperStatus
--snpd: BE+@rR3@[email protected]:::::1 -> 1 -> ifOperStatus = 1
--snpd: BE+@rR3@[email protected]:::::1 -> 2 -> ifOperStatus = 1
--snpd: BE+@rR3@[email protected]:::::1 -> 3 -> ifOperStatus = 2
--snpd: BE+@rR3@[email protected]:::::1 -> 4 -> ifOperStatus = 1
--snpd: BE+@rR3@[email protected]:::::1 -> 5 -> ifOperStatus = 1
--snpd: BE+@rR3@[email protected]:::::1 -> 6 -> ifOperStatus = 1
--snpd: BE+@rR3@[email protected]:::::1 -> 7 -> ifOperStatus = 2
--snpd: BE+@rR3@[email protected]:::::1 -> 8 -> ifOperStatus = 2
--snpd: BE+@rR3@[email protected]:::::1 -> 9 -> ifOperStatus = 2
--snpd: BE+@rR3@[email protected]:::::1 -> 10 -> ifOperStatus = 2
--snpd: BE+@rR3@[email protected]:::::1 -> 11 -> ifOperStatus = 1
--base: Walking ifMtu
--snpd: BE+@rR3@[email protected]:::::1 -> 1 -> ifMtu = 1500
--snpd: BE+@rR3@[email protected]:::::1 -> 2 -> ifMtu = 1500
--snpd: BE+@rR3@[email protected]:::::1 -> 3 -> ifMtu = 1500
--snpd: BE+@rR3@[email protected]:::::1 -> 4 -> ifMtu = 1500
--snpd: BE+@rR3@[email protected]:::::1 -> 5 -> ifMtu = 9600
--snpd: BE+@rR3@[email protected]:::::1 -> 6 -> ifMtu = 1500
--snpd: BE+@rR3@[email protected]:::::1 -> 9 -> ifMtu = 1500
--snpd: BE+@rR3@[email protected]:::::1 -> 10 -> ifMtu = 1500
--snpd: BE+@rR3@[email protected]:::::1 -> 11 -> ifMtu = 1514
--base: Walking ifAlias
--snpd: BE+@rR3@[email protected]:::::1 -> 1 -> ifAlias = to REOC-CORE G1/0/1
--snpd: BE+@rR3@[email protected]:::::1 -> 2 -> ifAlias = GigaMAN to BCSO-R1 G0/1
--snpd: BE+@rR3@[email protected]:::::1 -> 3 -> ifAlias =
--snpd: BE+@rR3@[email protected]:::::1 -> 4 -> ifAlias = to REOC-CORE G2/0/13
--snpd: BE+@rR3@[email protected]:::::1 -> 5 -> ifAlias =
--snpd: BE+@rR3@[email protected]:::::1 -> 6 -> ifAlias =
--snpd: BE+@rR3@[email protected]:::::1 -> 7 -> ifAlias =
--snpd: BE+@rR3@[email protected]:::::1 -> 8 -> ifAlias =
--snpd: BE+@rR3@[email protected]:::::1 -> 9 -> ifAlias =
--snpd: BE+@rR3@[email protected]:::::1 -> 10 -> ifAlias =
--snpd: BE+@rR3@[email protected]:::::1 -> 11 -> ifAlias =
--base: Walking vmVlan
--base: Walking vlanTrunkPortDynamicStatus
--base: Walking ifSpeed
--snpd: BE+@rR3@[email protected]:::::1 -> 1 -> ifSpeed = 1000000000
--snpd: BE+@rR3@[email protected]:::::1 -> 2 -> ifSpeed = 1000000000
--snpd: BE+@rR3@[email protected]:::::1 -> 3 -> ifSpeed = 1000000000
--snpd: BE+@rR3@[email protected]:::::1 -> 4 -> ifSpeed = 1000000000
--snpd: BE+@rR3@[email protected]:::::1 -> 5 -> ifSpeed = 1000000000
--snpd: BE+@rR3@[email protected]:::::1 -> 6 -> ifSpeed = 4294967295
--snpd: BE+@rR3@[email protected]:::::1 -> 7 -> ifSpeed = 1544000
--snpd: BE+@rR3@[email protected]:::::1 -> 8 -> ifSpeed = 1544000
--snpd: BE+@rR3@[email protected]:::::1 -> 9 -> ifSpeed = 1536000
--snpd: BE+@rR3@[email protected]:::::1 -> 10 -> ifSpeed = 1536000
--snpd: BE+@rR3@[email protected]:::::1 -> 11 -> ifSpeed = 4294967295
# Created by
# /usr/bin/cfgmaker --show-op-down --noreversedns --zero-speed 100000000 BE+@rR3@[email protected]:::::1


### Global Config Options

# for UNIX
# WorkDir: /home/http/mrtg

# or for NT
# WorkDir: c:\mrtgdata

### Global Defaults

# to get bits instead of bytes and graphs growing to the right
# Options[_]: growright, bits

EnableIPv6: no

######################################################################
# System: REOC-R01.bmxr.com
# Description: Cisco IOS Software, C3900e Software (C3900e-UNIVERSALK9-M), Version 15.1(1)T2, RELEASE SOFTWARE (fc1)
# Technical Support: http://www.cisco.com/techsupport
# Copyright (c) 1986-2010 by Cisco Systems, Inc.
# Compiled Sat 23-Oct-10 05:29 by prod_rel_team
# Contact: [email protected] +1 281-401-9098
# Location:
######################################################################


### Interface 1 >> Descr: 'GigabitEthernet0/0' | Name: 'Gi0/0' | Ip: '10.0.0.1' | Eth: '30-e4-db-5c-57-80' ###

Target[10.255.1.1_1]: 1:BE+\@rR3\@[email protected]:::::1
SetEnv[10.255.1.1_1]: MRTG_INT_IP="10.0.0.1" MRTG_INT_DESCR="GigabitEthernet0/0"
MaxBytes[10.255.1.1_1]: 125000000
Title[10.255.1.1_1]: Traffic Analysis for 1 -- REOC-R01.bmxr.com
PageTop[10.255.1.1_1]: <h1>Traffic Analysis for 1 -- REOC-R01.bmxr.com</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>REOC-R01.bmxr.com in </td>
</tr>
<tr>
<td>Maintainer:</td>
<td>[email protected] +1 281-401-9098</td>
</tr>
<tr>
<td>Description:</td>
<td>GigabitEthernet0/0 to REOC-CORE G1/0/1 </td>
</tr>
<tr>
<td>ifType:</td>
<td>ethernetCsmacd (6)</td>
</tr>
<tr>
<td>ifName:</td>
<td>Gi0/0</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>125.0 MBytes/s</td>
</tr>
<tr>
<td>Ip:</td>
<td>10.0.0.1 (No DNS name)</td>
</tr>
</table>
</div>


### Interface 2 >> Descr: 'GigabitEthernet0/1' | Name: 'Gi0/1' | Ip: '10.1.1.9' | Eth: '30-e4-db-5c-57-81' ###

Target[10.255.1.1_2]: 2:BE+\@rR3\@[email protected]:::::1
SetEnv[10.255.1.1_2]: MRTG_INT_IP="10.1.1.9" MRTG_INT_DESCR="GigabitEthernet0/1"
MaxBytes[10.255.1.1_2]: 125000000
Title[10.255.1.1_2]: Traffic Analysis for 2 -- REOC-R01.bmxr.com
PageTop[10.255.1.1_2]: <h1>Traffic Analysis for 2 -- REOC-R01.bmxr.com</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>REOC-R01.bmxr.com in </td>
</tr>
<tr>
<td>Maintainer:</td>
<td>[email protected] +1 281-401-9098</td>
</tr>
<tr>
<td>Description:</td>
<td>GigabitEthernet0/1 GigaMAN to BCSO-R1 G0/1 </td>
</tr>
<tr>
<td>ifType:</td>
<td>ethernetCsmacd (6)</td>
</tr>
<tr>
<td>ifName:</td>
<td>Gi0/1</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>125.0 MBytes/s</td>
</tr>
<tr>
<td>Ip:</td>
<td>10.1.1.9 (No DNS name)</td>
</tr>
</table>
</div>


### Interface 3 >> Descr: 'GigabitEthernet0/2' | Name: 'Gi0/2' | Ip: 'No Ip' | Eth: '30-e4-db-5c-57-82' ###
### The following interface is commented out because:
### * it is administratively DOWN
#
# Target[10.255.1.1_3]: 3:BE+\@rR3\@[email protected]:::::1
# SetEnv[10.255.1.1_3]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="GigabitEthernet0/2"
# MaxBytes[10.255.1.1_3]: 125000000
# Title[10.255.1.1_3]: Traffic Analysis for 3 -- REOC-R01.bmxr.com
# PageTop[10.255.1.1_3]: <h1>Traffic Analysis for 3 -- REOC-R01.bmxr.com</h1>
# <div id="sysdetails">
# <table>
# <tr>
# <td>System:</td>
# <td>REOC-R01.bmxr.com in </td>
# </tr>
# <tr>
# <td>Maintainer:</td>
# <td>[email protected] +1 281-401-9098</td>
# </tr>
# <tr>
# <td>Description:</td>
# <td>GigabitEthernet0/2 </td>
# </tr>
# <tr>
# <td>ifType:</td>
# <td>ethernetCsmacd (6)</td>
# </tr>
# <tr>
# <td>ifName:</td>
# <td>Gi0/2</td>
# </tr>
# <tr>
# <td>Max Speed:</td>
# <td>125.0 MBytes/s</td>
# </tr>
# <tr>
# <td>Ip:</td>
# <td>No Ip (No DNS name)</td>
# </tr>
# </table>
# </div>


### Interface 4 >> Descr: 'GigabitEthernet0/3' | Name: 'Gi0/3' | Ip: '10.0.0.33' | Eth: '30-e4-db-5c-57-83' ###

Target[10.255.1.1_4]: 4:BE+\@rR3\@[email protected]:::::1
SetEnv[10.255.1.1_4]: MRTG_INT_IP="10.0.0.33" MRTG_INT_DESCR="GigabitEthernet0/3"
MaxBytes[10.255.1.1_4]: 125000000
Title[10.255.1.1_4]: Traffic Analysis for 4 -- REOC-R01.bmxr.com
PageTop[10.255.1.1_4]: <h1>Traffic Analysis for 4 -- REOC-R01.bmxr.com</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>REOC-R01.bmxr.com in </td>
</tr>
<tr>
<td>Maintainer:</td>
<td>[email protected] +1 281-401-9098</td>
</tr>
<tr>
<td>Description:</td>
<td>GigabitEthernet0/3 to REOC-CORE G2/0/13 </td>
</tr>
<tr>
<td>ifType:</td>
<td>ethernetCsmacd (6)</td>
</tr>
<tr>
<td>ifName:</td>
<td>Gi0/3</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>125.0 MBytes/s</td>
</tr>
<tr>
<td>Ip:</td>
<td>10.0.0.33 (No DNS name)</td>
</tr>
</table>
</div>


### Interface 5 >> Descr: 'Backplane-GigabitEthernet0/4' | Name: 'Ba0/4' | Ip: 'No Ip' | Eth: '30-e4-db-5c-57-84' ###

Target[10.255.1.1_5]: 5:BE+\@rR3\@[email protected]:::::1
SetEnv[10.255.1.1_5]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="Backplane-GigabitEthernet0/4"
MaxBytes[10.255.1.1_5]: 125000000
Title[10.255.1.1_5]: Traffic Analysis for 5 -- REOC-R01.bmxr.com
PageTop[10.255.1.1_5]: <h1>Traffic Analysis for 5 -- REOC-R01.bmxr.com</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>REOC-R01.bmxr.com in </td>
</tr>
<tr>
<td>Maintainer:</td>
<td>[email protected] +1 281-401-9098</td>
</tr>
<tr>
<td>Description:</td>
<td>Backplane-GigabitEthernet0/4 </td>
</tr>
<tr>
<td>ifType:</td>
<td>ethernetCsmacd (6)</td>
</tr>
<tr>
<td>ifName:</td>
<td>Ba0/4</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>125.0 MBytes/s</td>
</tr>
<tr>
<td>Ip:</td>
<td>No Ip (No DNS name)</td>
</tr>
</table>
</div>


### Interface 6 >> Descr: 'Null0' | Name: 'Nu0' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ###
### The following interface is commented out because:
### * it is a cisco Null0 interface
#
# Target[10.255.1.1_6]: 6:BE+\@rR3\@[email protected]:::::1
# SetEnv[10.255.1.1_6]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="Null0"
# MaxBytes[10.255.1.1_6]: 536870911
# Title[10.255.1.1_6]: Traffic Analysis for 6 -- REOC-R01.bmxr.com
# PageTop[10.255.1.1_6]: <h1>Traffic Analysis for 6 -- REOC-R01.bmxr.com</h1>
# <div id="sysdetails">
# <table>
# <tr>
# <td>System:</td>
# <td>REOC-R01.bmxr.com in </td>
# </tr>
# <tr>
# <td>Maintainer:</td>
# <td>[email protected] +1 281-401-9098</td>
# </tr>
# <tr>
# <td>Description:</td>
# <td>Null0 </td>
# </tr>
# <tr>
# <td>ifType:</td>
# <td>Other (1)</td>
# </tr>
# <tr>
# <td>ifName:</td>
# <td>Nu0</td>
# </tr>
# <tr>
# <td>Max Speed:</td>
# <td>536.9 MBytes/s</td>
# </tr>
# <tr>
# <td>Ip:</td>
# <td>No Ip (No DNS name)</td>
# </tr>
# </table>
# </div>


### Interface 7 >> Descr: 'T1-0/0/0' | Name: 'T1 0/0/0' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ###
### The following interface is commented out because:
### * it is a DS1 controllers
### * got 'Received SNMP response with error code
### error status: noSuchName
### index 1 (OID: 1.3.6.1.2.1.2.2.1.10.7)
### SNMPv1_Session (remote host: "10.255.1.1" [10.255.1.1].161)
### community: "BE+@rR3@d"
### request ID: -580542007
### PDU bufsize: 8000 bytes
### timeout: 2s
### retries: 5
### backoff: 1)' from interface when trying to query
#
# Target[10.255.1.1_7]: 7:BE+\@rR3\@[email protected]:::::1
# SetEnv[10.255.1.1_7]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="T1-0/0/0"
# MaxBytes[10.255.1.1_7]: 193000
# Title[10.255.1.1_7]: Traffic Analysis for 7 -- REOC-R01.bmxr.com
# PageTop[10.255.1.1_7]: <h1>Traffic Analysis for 7 -- REOC-R01.bmxr.com</h1>
# <div id="sysdetails">
# <table>
# <tr>
# <td>System:</td>
# <td>REOC-R01.bmxr.com in </td>
# </tr>
# <tr>
# <td>Maintainer:</td>
# <td>[email protected] +1 281-401-9098</td>
# </tr>
# <tr>
# <td>Description:</td>
# <td>T1-0/0/0 </td>
# </tr>
# <tr>
# <td>ifType:</td>
# <td>ds1 (18)</td>
# </tr>
# <tr>
# <td>ifName:</td>
# <td>T1 0/0/0</td>
# </tr>
# <tr>
# <td>Max Speed:</td>
# <td>193.0 kBytes/s</td>
# </tr>
# <tr>
# <td>Ip:</td>
# <td>No Ip (No DNS name)</td>
# </tr>
# </table>
# </div>


### Interface 8 >> Descr: 'T1-0/0/1' | Name: 'T1 0/0/1' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ###
### The following interface is commented out because:
### * it is a DS1 controllers
### * got 'Received SNMP response with error code
### error status: noSuchName
### index 1 (OID: 1.3.6.1.2.1.2.2.1.10.8)
### SNMPv1_Session (remote host: "10.255.1.1" [10.255.1.1].161)
### community: "BE+@rR3@d"
### request ID: -580542006
### PDU bufsize: 8000 bytes
### timeout: 2s
### retries: 5
### backoff: 1)' from interface when trying to query
#
# Target[10.255.1.1_8]: 8:BE+\@rR3\@[email protected]:::::1
# SetEnv[10.255.1.1_8]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="T1-0/0/1"
# MaxBytes[10.255.1.1_8]: 193000
# Title[10.255.1.1_8]: Traffic Analysis for 8 -- REOC-R01.bmxr.com
# PageTop[10.255.1.1_8]: <h1>Traffic Analysis for 8 -- REOC-R01.bmxr.com</h1>
# <div id="sysdetails">
# <table>
# <tr>
# <td>System:</td>
# <td>REOC-R01.bmxr.com in </td>
# </tr>
# <tr>
# <td>Maintainer:</td>
# <td>[email protected] +1 281-401-9098</td>
# </tr>
# <tr>
# <td>Description:</td>
# <td>T1-0/0/1 </td>
# </tr>
# <tr>
# <td>ifType:</td>
# <td>ds1 (18)</td>
# </tr>
# <tr>
# <td>ifName:</td>
# <td>T1 0/0/1</td>
# </tr>
# <tr>
# <td>Max Speed:</td>
# <td>193.0 kBytes/s</td>
# </tr>
# <tr>
# <td>Ip:</td>
# <td>No Ip (No DNS name)</td>
# </tr>
# </table>
# </div>


### Interface 9 >> Descr: 'Serial0/0/0:0' | Name: 'Se0/0/0:0' | Ip: '10.1.1.1' | Eth: 'No Ethernet Id' ###
### The following interface is commented out because:
### * it is administratively DOWN
#
# Target[10.255.1.1_9]: 9:BE+\@rR3\@[email protected]:::::1
# SetEnv[10.255.1.1_9]: MRTG_INT_IP="10.1.1.1" MRTG_INT_DESCR="Serial0/0/0:0"
# MaxBytes[10.255.1.1_9]: 192000
# Title[10.255.1.1_9]: Traffic Analysis for 9 -- REOC-R01.bmxr.com
# PageTop[10.255.1.1_9]: <h1>Traffic Analysis for 9 -- REOC-R01.bmxr.com</h1>
# <div id="sysdetails">
# <table>
# <tr>
# <td>System:</td>
# <td>REOC-R01.bmxr.com in </td>
# </tr>
# <tr>
# <td>Maintainer:</td>
# <td>[email protected] +1 281-401-9098</td>
# </tr>
# <tr>
# <td>Description:</td>
# <td>Serial0/0/0:0 </td>
# </tr>
# <tr>
# <td>ifType:</td>
# <td>propPointToPointSerial (22)</td>
# </tr>
# <tr>
# <td>ifName:</td>
# <td>Se0/0/0:0</td>
# </tr>
# <tr>
# <td>Max Speed:</td>
# <td>192.0 kBytes/s</td>
# </tr>
# <tr>
# <td>Ip:</td>
# <td>10.1.1.1 (No DNS name)</td>
# </tr>
# </table>
# </div>


### Interface 10 >> Descr: 'Serial0/0/1:0' | Name: 'Se0/0/1:0' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ###
### The following interface is commented out because:
### * it is administratively DOWN
#
# Target[10.255.1.1_10]: 10:BE+\@rR3\@[email protected]:::::1
# SetEnv[10.255.1.1_10]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="Serial0/0/1:0"
# MaxBytes[10.255.1.1_10]: 192000
# Title[10.255.1.1_10]: Traffic Analysis for 10 -- REOC-R01.bmxr.com
# PageTop[10.255.1.1_10]: <h1>Traffic Analysis for 10 -- REOC-R01.bmxr.com</h1>
# <div id="sysdetails">
# <table>
# <tr>
# <td>System:</td>
# <td>REOC-R01.bmxr.com in </td>
# </tr>
# <tr>
# <td>Maintainer:</td>
# <td>[email protected] +1 281-401-9098</td>
# </tr>
# <tr>
# <td>Description:</td>
# <td>Serial0/0/1:0 </td>
# </tr>
# <tr>
# <td>ifType:</td>
# <td>propPointToPointSerial (22)</td>
# </tr>
# <tr>
# <td>ifName:</td>
# <td>Se0/0/1:0</td>
# </tr>
# <tr>
# <td>Max Speed:</td>
# <td>192.0 kBytes/s</td>
# </tr>
# <tr>
# <td>Ip:</td>
# <td>No Ip (No DNS name)</td>
# </tr>
# </table>
# </div>


### Interface 11 >> Descr: 'Loopback0' | Name: 'Lo0' | Ip: '10.255.1.1' | Eth: 'No Ethernet Id' ###
### The following interface is commented out because:
### * it is a Software Loopback interface
#
# Target[10.255.1.1_11]: 11:BE+\@rR3\@[email protected]:::::1
# SetEnv[10.255.1.1_11]: MRTG_INT_IP="10.255.1.1" MRTG_INT_DESCR="Loopback0"
# MaxBytes[10.255.1.1_11]: 536870911
# Title[10.255.1.1_11]: Traffic Analysis for 11 -- REOC-R01.bmxr.com
# PageTop[10.255.1.1_11]: <h1>Traffic Analysis for 11 -- REOC-R01.bmxr.com</h1>
# <div id="sysdetails">
# <table>
# <tr>
# <td>System:</td>
# <td>REOC-R01.bmxr.com in </td>
# </tr>
# <tr>
# <td>Maintainer:</td>
# <td>[email protected] +1 281-401-9098</td>
# </tr>
# <tr>
# <td>Description:</td>
# <td>Loopback0 </td>
# </tr>
# <tr>
# <td>ifType:</td>
# <td>softwareLoopback (24)</td>
# </tr>
# <tr>
# <td>ifName:</td>
# <td>Lo0</td>
# </tr>
# <tr>
# <td>Max Speed:</td>
# <td>536.9 MBytes/s</td>
# </tr>
# <tr>
# <td>Ip:</td>
# <td>10.255.1.1 (No DNS name)</td>
# </tr>
# </table>
# </div>

Download the wizard from here:

http://exchange.nagios.org/directory/Ad ... rd/details

Then upload it via Admin > System Extensions > Manage Config Wizards.

See if this fixes your problem.

That worked! Is this a newer version than what is included on 2.0 or a patched version? I still can't find any ports on switches but the routers are good now.

Here is the output for a switch that is failing with the same error:
[root@bexar-nms-01 ~]# /usr/bin/cfgmaker --show-op-down --noreversedns --zero-speed '100000000' 'BE+@rR3@[email protected]:161::::2'
--base: Get Device Info on BE+@rR3@[email protected]:161::::2
SNMP Error:
no response received
SNMPv2c_Session (remote host: "10.255.2.3" [10.255.2.3].161)
community: "BE+@rR3@d"
request ID: -1237776829
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/bin/../lib/mrtg2/SNMP_util.pm line 651
SNMPWALK Problem for 1.3.6.1.2.1.1 on BE+@rR3@[email protected]:161::::2:v4only
at /usr/bin/cfgmaker line 951
WARNING: Skipping BE+@rR3@[email protected]:161::::2 as no info could be retrieved

Use of uninitialized value $comment_sysdescr in substitution (s///) at /usr/bin/cfgmaker line 379.
Use of uninitialized value $sysname in concatenation (.) or string at /usr/bin/cfgmaker line 412.
Use of uninitialized value $comment_sysdescr in concatenation (.) or string at /usr/bin/cfgmaker line 412.
Use of uninitialized value $syscontact in concatenation (.) or string at /usr/bin/cfgmaker line 412.
Use of uninitialized value $syslocation in concatenation (.) or string at /usr/bin/cfgmaker line 412.
# Created by
# /usr/bin/cfgmaker --show-op-down --noreversedns --zero-speed 100000000 BE+@rR3@[email protected]:161::::2


### Global Config Options

# for UNIX
# WorkDir: /home/http/mrtg

# or for NT
# WorkDir: c:\mrtgdata

### Global Defaults

# to get bits instead of bytes and graphs growing to the right
# Options[_]: growright, bits

EnableIPv6: no

######################################################################
# System:
# Description:
# Contact:
# Location:
######################################################################

Nevermind! SNMPWALK fails as well. Probably a config issue on the switch!

Locking. PM us or create a new topic if you have other questions. Thanks!