Nagios Support Forum

Support for Nagios products and services
https://support.nagios.com/forum/

performance graph

https://support.nagios.com/forum/viewtopic.php?t=32494

Page 1 of 1

performance graph

Posted: Tue Apr 21, 2015 4:58 am
by hanya.radwan
hi,

the performance graph for all services shows empty graph.

thanks,

Re: performance graph

Posted: Tue Apr 21, 2015 11:07 am
by lmiltchev
Have you tried following the troubleshooting steps, listed on our FAQ wiki page?

http://support.nagios.com/wiki/index.ph ... h_Problems

Re: performance graph

Posted: Mon Apr 27, 2015 3:47 am
by hanya.radwan
I applied troubleshooting steps, I found this when try to open graph for one service:-
cat /usr/local/nagios/var/npcd.log
[04-27-2015 11:38:29] NPCD: DEBUG: load 1.870000/10.000000
[04-27-2015 11:38:29] NPCD: Processing file '1429190167.perfdata.service'
[04-27-2015 11:38:29] NPCD: ThreadCounter 3/5 File is 1429190182.perfdata.host
[04-27-2015 11:38:29] NPCD: Regular File: 1429190182.perfdata.host
[04-27-2015 11:38:29] NPCD: A thread was started on thread_counter = 3
[04-27-2015 11:38:29] NPCD: DEBUG: load 1.870000/10.000000
[04-27-2015 11:38:29] NPCD: ThreadCounter 4/5 File is 1429190182.perfdata.service
[04-27-2015 11:38:29] NPCD: Regular File: 1429190182.perfdata.service
[04-27-2015 11:38:29] NPCD: A thread was started on thread_counter = 4
[04-27-2015 11:38:29] NPCD: DEBUG: load 1.870000/10.000000
[04-27-2015 11:38:29] NPCD: ThreadCounter 5/5 File is 1429190197.perfdata.host
[04-27-2015 11:38:29] NPCD: Regular File: 1429190197.perfdata.host
[04-27-2015 11:38:29] NPCD: WARN: MAX Thread reached: 1429190197.perfdata.host comes later with ThreadCounter: 5
[04-27-2015 11:38:29] NPCD: DEBUG: Will wait for th['4']
[04-27-2015 11:38:29] NPCD: Processing file 1429190182.perfdata.service with ID 140510360487680 - going to exec /usr/local/nagios/libexec/process_perfdata.pl -n -b /var/nagiosramdisk/spool/perfdata//1429190182.perfdata.service
[04-27-2015 11:38:29] NPCD: Processing file '1429190182.perfdata.service'
[04-27-2015 11:38:29] NPCD: Processing file 1429190182.perfdata.host with ID 140510370977536 - going to exec /usr/local/nagios/libexec/process_perfdata.pl -n -b /var/nagiosramdisk/spool/perfdata//1429190182.perfdata.host
[04-27-2015 11:38:29] NPCD: Processing file '1429190182.perfdata.host'

Re: performance graph

Posted: Mon Apr 27, 2015 9:48 am
by lmiltchev
Can you run the following commands and show us the output?

Code: Select all

ls /var/nagiosramdisk/spool/xidpe | wc -l
ls /var/nagiosramdisk/spool/perfdata/ | wc -l
ls /var/nagiosramdisk/spool/checkresults/ | wc -l
ps -ef | grep [p]erfdataproc
service npcd status
uptime

Re: performance graph

Posted: Wed Apr 29, 2015 2:44 am
by hanya.radwan
[root@nms ~]# ls /var/nagiosramdisk/spool/xidpe | wc -l
0
You have new mail in /var/spool/mail/root
[root@nms ~]# ls /var/nagiosramdisk/spool/perfdata/ | wc -l
2
[root@nms ~]# ls /var/nagiosramdisk/spool/checkresults/ | wc -l
0
[root@nms ~]# ps -ef | grep [p]erfdataproc
nagios 28125 28104 0 10:45 ? 00:00:00 /bin/sh -c /usr/bin/php -q /usr/local/nagiosxi/cron/perfdataproc.php > /usr/local/nagiosxi/var/perfdataproc.log 2>&1
nagios 28131 28125 0 10:45 ? 00:00:00 /usr/bin/php -q /usr/local/nagiosxi/cron/perfdataproc.php
[root@nms ~]# service npcd status
NPCD running (pid 37151).
[root@nms ~]# uptime
10:45:53 up 90 days, 22:57, 1 user, load average: 1.68, 1.35, 0.99

Re: performance graph

Posted: Wed Apr 29, 2015 12:57 pm
by tgriep
Could you run the following and post back the results?

Code: Select all

tail -200 /usr/local/nagios/var/perfdata.log
grep nagiosramdisk /usr/local/nagios/etc/nagios.cfg
grep nagiosramdisk /usr/local/nrdp/server/config.inc.php
grep nagiosramdisk /usr/local/nagiosxi/html/config.inc.php
grep nagiosramdisk /usr/local/nagios/etc/pnp/npcd.cfg
grep nagiosramdisk /usr/local/nagios/etc/commands.cfg

Re: performance graph

Posted: Sun May 24, 2015 5:50 am
by hanya.radwan
hi,

sorry for late:-

[root@nms ~]# tail -200 /usr/local/nagios/var/perfdata.log
2015-04-27 11:49:26 [35822] [1] PNP exiting (runtime 0.000529s) ...
2015-04-27 11:49:26 [35816] [2] Using Config File /usr/local/nagios/etc/pnp/process_perfdata.cfg parameters
2015-04-27 11:49:26 [35816] [1] process_perfdata.pl-0.4.14 starting in BULK Mode called by NPCD
2015-04-27 11:49:26 [35816] [2] searching for /var/nagiosramdisk/spool/perfdata//1429201897.perfdata.service
2015-04-27 11:49:26 [35816] [2] renaming /var/nagiosramdisk/spool/perfdata//1429201897.perfdata.service to /var/nagiosramdisk/spool/perfdata//1429201897.perfdata.service-PID-35816 for bulk update
2015-04-27 11:49:26 [35816] [2] reading /var/nagiosramdisk/spool/perfdata//1429201897.perfdata.service-PID-35816 for bulk update
2015-04-27 11:49:26 [35816] [1] 0 Lines processed
2015-04-27 11:49:26 [35816] [1] /var/nagiosramdisk/spool/perfdata//1429201897.perfdata.service-PID-35816 deleted
2015-04-27 11:49:26 [35816] [1] PNP exiting (runtime 0.000531s) ...
2015-04-27 11:49:26 [35820] [2] Using Config File /usr/local/nagios/etc/pnp/process_perfdata.cfg parameters
2015-04-27 11:49:26 [35820] [1] process_perfdata.pl-0.4.14 starting in BULK Mode called by NPCD
2015-04-27 11:49:26 [35820] [2] searching for /var/nagiosramdisk/spool/perfdata//1429201912.perfdata.service
2015-04-27 11:49:26 [35820] [2] renaming /var/nagiosramdisk/spool/perfdata//1429201912.perfdata.service to /var/nagiosramdisk/spool/perfdata//1429201912.perfdata.service-PID-35820 for bulk update
2015-04-27 11:49:26 [35820] [2] reading /var/nagiosramdisk/spool/perfdata//1429201912.perfdata.service-PID-35820 for bulk update
2015-04-27 11:49:26 [35820] [1] 0 Lines processed
2015-04-27 11:49:26 [35820] [1] /var/nagiosramdisk/spool/perfdata//1429201912.perfdata.service-PID-35820 deleted
2015-04-27 11:49:26 [35820] [1] PNP exiting (runtime 0.000534s) ...
2015-04-27 11:49:26 [35818] [2] Using Config File /usr/local/nagios/etc/pnp/process_perfdata.cfg parameters
2015-04-27 11:49:26 [35818] [1] process_perfdata.pl-0.4.14 starting in BULK Mode called by NPCD
2015-04-27 11:49:26 [35818] [2] searching for /var/nagiosramdisk/spool/perfdata//1429201912.perfdata.host
2015-04-27 11:49:26 [35818] [2] renaming /var/nagiosramdisk/spool/perfdata//1429201912.perfdata.host to /var/nagiosramdisk/spool/perfdata//1429201912.perfdata.host-PID-35818 for bulk update
2015-04-27 11:49:26 [35818] [2] reading /var/nagiosramdisk/spool/perfdata//1429201912.perfdata.host-PID-35818 for bulk update
2015-04-27 11:49:26 [35818] [1] 0 Lines processed
2015-04-27 11:49:26 [35818] [1] /var/nagiosramdisk/spool/perfdata//1429201912.perfdata.host-PID-35818 deleted
2015-04-27 11:49:26 [35818] [1] PNP exiting (runtime 0.000518s) ...
2015-04-27 11:49:28 [35844] [2] Using Config File /usr/local/nagios/etc/pnp/process_perfdata.cfg parameters
2015-04-27 11:49:28 [35846] [2] Using Config File /usr/local/nagios/etc/pnp/process_perfdata.cfg parameters
2015-04-27 11:49:28 [35846] [1] process_perfdata.pl-0.4.14 starting in BULK Mode called by NPCD
2015-04-27 11:49:28 [35844] [1] process_perfdata.pl-0.4.14 starting in BULK Mode called by NPCD
2015-04-27 11:49:28 [35846] [2] searching for /var/nagiosramdisk/spool/perfdata//1429201958.perfdata.service
2015-04-27 11:49:28 [35844] [2] searching for /var/nagiosramdisk/spool/perfdata//1429201957.perfdata.host
2015-04-27 11:49:28 [35846] [2] renaming /var/nagiosramdisk/spool/perfdata//1429201958.perfdata.service to /var/nagiosramdisk/spool/perfdata//1429201958.perfdata.service-PID-35846 for bulk update
2015-04-27 11:49:28 [35844] [2] renaming /var/nagiosramdisk/spool/perfdata//1429201957.perfdata.host to /var/nagiosramdisk/spool/perfdata//1429201957.perfdata.host-PID-35844 for bulk update
2015-04-27 11:49:28 [35846] [2] reading /var/nagiosramdisk/spool/perfdata//1429201958.perfdata.service-PID-35846 for bulk update
2015-04-27 11:49:28 [35844] [2] reading /var/nagiosramdisk/spool/perfdata//1429201957.perfdata.host-PID-35844 for bulk update
2015-04-27 11:49:28 [35846] [1] 0 Lines processed
2015-04-27 11:49:28 [35844] [1] 0 Lines processed
2015-04-27 11:49:28 [35846] [1] /var/nagiosramdisk/spool/perfdata//1429201958.perfdata.service-PID-35846 deleted
2015-04-27 11:49:28 [35844] [1] /var/nagiosramdisk/spool/perfdata//1429201957.perfdata.host-PID-35844 deleted
2015-04-27 11:49:28 [35846] [1] PNP exiting (runtime 0.000314s) ...
2015-04-27 11:49:28 [35844] [1] PNP exiting (runtime 0.000321s) ...
2015-04-27 11:49:28 [35847] [2] Using Config File /usr/local/nagios/etc/pnp/process_perfdata.cfg parameters
2015-04-27 11:49:28 [35847] [1] process_perfdata.pl-0.4.14 starting in BULK Mode called by NPCD
2015-04-27 11:49:28 [35847] [2] searching for /var/nagiosramdisk/spool/perfdata//1429201942.perfdata.service
2015-04-27 11:49:28 [35847] [2] renaming /var/nagiosramdisk/spool/perfdata//1429201942.perfdata.service to /var/nagiosramdisk/spool/perfdata//1429201942.perfdata.service-PID-35847 for bulk update
2015-04-27 11:49:28 [35847] [2] reading /var/nagiosramdisk/spool/perfdata//1429201942.perfdata.service-PID-35847 for bulk update
2015-04-27 11:49:28 [35847] [1] 0 Lines processed
2015-04-27 11:49:28 [35847] [1] /var/nagiosramdisk/spool/perfdata//1429201942.perfdata.service-PID-35847 deleted
2015-04-27 11:49:28 [35847] [1] PNP exiting (runtime 0.000309s) ...
2015-04-27 11:49:28 [35848] [2] Using Config File /usr/local/nagios/etc/pnp/process_perfdata.cfg parameters
2015-04-27 11:49:28 [35848] [1] process_perfdata.pl-0.4.14 starting in BULK Mode called by NPCD
2015-04-27 11:49:28 [35848] [2] searching for /var/nagiosramdisk/spool/perfdata//1429201927.perfdata.service
2015-04-27 11:49:28 [35848] [2] renaming /var/nagiosramdisk/spool/perfdata//1429201927.perfdata.service to /var/nagiosramdisk/spool/perfdata//1429201927.perfdata.service-PID-35848 for bulk update
2015-04-27 11:49:28 [35848] [2] reading /var/nagiosramdisk/spool/perfdata//1429201927.perfdata.service-PID-35848 for bulk update
2015-04-27 11:49:28 [35848] [1] 0 Lines processed
2015-04-27 11:49:28 [35848] [1] /var/nagiosramdisk/spool/perfdata//1429201927.perfdata.service-PID-35848 deleted
2015-04-27 11:49:28 [35848] [1] PNP exiting (runtime 0.000292s) ...
2015-04-27 11:49:28 [35845] [2] Using Config File /usr/local/nagios/etc/pnp/process_perfdata.cfg parameters
2015-04-27 11:49:28 [35845] [1] process_perfdata.pl-0.4.14 starting in BULK Mode called by NPCD
2015-04-27 11:49:28 [35845] [2] searching for /var/nagiosramdisk/spool/perfdata//1429201942.perfdata.host
2015-04-27 11:49:28 [35845] [2] renaming /var/nagiosramdisk/spool/perfdata//1429201942.perfdata.host to /var/nagiosramdisk/spool/perfdata//1429201942.perfdata.host-PID-35845 for bulk update
2015-04-27 11:49:28 [35845] [2] reading /var/nagiosramdisk/spool/perfdata//1429201942.perfdata.host-PID-35845 for bulk update
2015-04-27 11:49:28 [35845] [1] 0 Lines processed
2015-04-27 11:49:28 [35845] [1] /var/nagiosramdisk/spool/perfdata//1429201942.perfdata.host-PID-35845 deleted
2015-04-27 11:49:28 [35845] [1] PNP exiting (runtime 0.00029s) ...
2015-04-27 11:49:30 [35867] [2] Using Config File /usr/local/nagios/etc/pnp/process_perfdata.cfg parameters
2015-04-27 11:49:30 [35867] [1] process_perfdata.pl-0.4.14 starting in BULK Mode called by NPCD
2015-04-27 11:49:30 [35867] [2] searching for /var/nagiosramdisk/spool/perfdata//1429201973.perfdata.service
2015-04-27 11:49:30 [35867] [2] renaming /var/nagiosramdisk/spool/perfdata//1429201973.perfdata.service to /var/nagiosramdisk/spool/perfdata//1429201973.perfdata.service-PID-35867 for bulk update
2015-04-27 11:49:30 [35867] [2] reading /var/nagiosramdisk/spool/perfdata//1429201973.perfdata.service-PID-35867 for bulk update
2015-04-27 11:49:30 [35867] [1] 0 Lines processed
2015-04-27 11:49:30 [35867] [1] /var/nagiosramdisk/spool/perfdata//1429201973.perfdata.service-PID-35867 deleted
2015-04-27 11:49:30 [35867] [1] PNP exiting (runtime 0.000297s) ...
2015-04-27 11:49:30 [35869] [2] Using Config File /usr/local/nagios/etc/pnp/process_perfdata.cfg parameters
2015-04-27 11:49:30 [35869] [1] process_perfdata.pl-0.4.14 starting in BULK Mode called by NPCD
2015-04-27 11:49:30 [35869] [2] searching for /var/nagiosramdisk/spool/perfdata//1429201987.perfdata.host
2015-04-27 11:49:30 [35869] [2] renaming /var/nagiosramdisk/spool/perfdata//1429201987.perfdata.host to /var/nagiosramdisk/spool/perfdata//1429201987.perfdata.host-PID-35869 for bulk update
2015-04-27 11:49:30 [35869] [2] reading /var/nagiosramdisk/spool/perfdata//1429201987.perfdata.host-PID-35869 for bulk update
2015-04-27 11:49:30 [35869] [1] 0 Lines processed
2015-04-27 11:49:30 [35869] [1] /var/nagiosramdisk/spool/perfdata//1429201987.perfdata.host-PID-35869 deleted
2015-04-27 11:49:30 [35869] [1] PNP exiting (runtime 0.00027s) ...
2015-04-27 11:49:30 [35865] [2] Using Config File /usr/local/nagios/etc/pnp/process_perfdata.cfg parameters
2015-04-27 11:49:30 [35865] [1] process_perfdata.pl-0.4.14 starting in BULK Mode called by NPCD
2015-04-27 11:49:30 [35865] [2] searching for /var/nagiosramdisk/spool/perfdata//1429201973.perfdata.host
2015-04-27 11:49:30 [35865] [2] renaming /var/nagiosramdisk/spool/perfdata//1429201973.perfdata.host to /var/nagiosramdisk/spool/perfdata//1429201973.perfdata.host-PID-35865 for bulk update
2015-04-27 11:49:30 [35865] [2] reading /var/nagiosramdisk/spool/perfdata//1429201973.perfdata.host-PID-35865 for bulk update
2015-04-27 11:49:30 [35865] [1] 0 Lines processed
2015-04-27 11:49:30 [35865] [1] /var/nagiosramdisk/spool/perfdata//1429201973.perfdata.host-PID-35865 deleted
2015-04-27 11:49:30 [35865] [1] PNP exiting (runtime 0.000274s) ...
2015-04-27 11:49:30 [35872] [2] Using Config File /usr/local/nagios/etc/pnp/process_perfdata.cfg parameters
2015-04-27 11:49:30 [35872] [1] process_perfdata.pl-0.4.14 starting in BULK Mode called by NPCD
2015-04-27 11:49:30 [35872] [2] searching for /var/nagiosramdisk/spool/perfdata//1429202002.perfdata.host
2015-04-27 11:49:30 [35872] [2] renaming /var/nagiosramdisk/spool/perfdata//1429202002.perfdata.host to /var/nagiosramdisk/spool/perfdata//1429202002.perfdata.host-PID-35872 for bulk update
2015-04-27 11:49:30 [35872] [2] reading /var/nagiosramdisk/spool/perfdata//1429202002.perfdata.host-PID-35872 for bulk update
2015-04-27 11:49:30 [35872] [1] 0 Lines processed
2015-04-27 11:49:30 [35872] [1] /var/nagiosramdisk/spool/perfdata//1429202002.perfdata.host-PID-35872 deleted
2015-04-27 11:49:30 [35872] [1] PNP exiting (runtime 0.000291s) ...
2015-04-27 11:49:30 [35873] [2] Using Config File /usr/local/nagios/etc/pnp/process_perfdata.cfg parameters
2015-04-27 11:49:30 [35873] [1] process_perfdata.pl-0.4.14 starting in BULK Mode called by NPCD
2015-04-27 11:49:30 [35873] [2] searching for /var/nagiosramdisk/spool/perfdata//1429201987.perfdata.service
2015-04-27 11:49:30 [35873] [2] renaming /var/nagiosramdisk/spool/perfdata//1429201987.perfdata.service to /var/nagiosramdisk/spool/perfdata//1429201987.perfdata.service-PID-35873 for bulk update
2015-04-27 11:49:30 [35873] [2] reading /var/nagiosramdisk/spool/perfdata//1429201987.perfdata.service-PID-35873 for bulk update
2015-04-27 11:49:30 [35873] [1] 0 Lines processed
2015-04-27 11:49:30 [35873] [1] /var/nagiosramdisk/spool/perfdata//1429201987.perfdata.service-PID-35873 deleted
2015-04-27 11:49:30 [35873] [1] PNP exiting (runtime 0.000547s) ...
2015-04-27 11:49:32 [35893] [2] Using Config File /usr/local/nagios/etc/pnp/process_perfdata.cfg parameters
2015-04-27 11:49:32 [35895] [2] Using Config File /usr/local/nagios/etc/pnp/process_perfdata.cfg parameters
2015-04-27 11:49:32 [35893] [1] process_perfdata.pl-0.4.14 starting in BULK Mode called by NPCD
2015-04-27 11:49:32 [35895] [1] process_perfdata.pl-0.4.14 starting in BULK Mode called by NPCD
2015-04-27 11:49:32 [35893] [2] searching for /var/nagiosramdisk/spool/perfdata//1429202017.perfdata.host
2015-04-27 11:49:32 [35895] [2] searching for /var/nagiosramdisk/spool/perfdata//1429202017.perfdata.service
2015-04-27 11:49:32 [35893] [2] renaming /var/nagiosramdisk/spool/perfdata//1429202017.perfdata.host to /var/nagiosramdisk/spool/perfdata//1429202017.perfdata.host-PID-35893 for bulk update
2015-04-27 11:49:32 [35895] [2] renaming /var/nagiosramdisk/spool/perfdata//1429202017.perfdata.service to /var/nagiosramdisk/spool/perfdata//1429202017.perfdata.service-PID-35895 for bulk update
2015-04-27 11:49:32 [35893] [2] reading /var/nagiosramdisk/spool/perfdata//1429202017.perfdata.host-PID-35893 for bulk update
2015-04-27 11:49:32 [35895] [2] reading /var/nagiosramdisk/spool/perfdata//1429202017.perfdata.service-PID-35895 for bulk update
2015-04-27 11:49:32 [35893] [1] 0 Lines processed
2015-04-27 11:49:32 [35895] [1] 0 Lines processed
2015-04-27 11:49:32 [35899] [2] Using Config File /usr/local/nagios/etc/pnp/process_perfdata.cfg parameters
2015-04-27 11:49:32 [35895] [1] /var/nagiosramdisk/spool/perfdata//1429202017.perfdata.service-PID-35895 deleted
2015-04-27 11:49:32 [35893] [1] /var/nagiosramdisk/spool/perfdata//1429202017.perfdata.host-PID-35893 deleted
2015-04-27 11:49:32 [35895] [1] PNP exiting (runtime 0.000537s) ...
2015-04-27 11:49:32 [35893] [1] PNP exiting (runtime 0.000571s) ...
2015-04-27 11:49:32 [35899] [1] process_perfdata.pl-0.4.14 starting in BULK Mode called by NPCD
2015-04-27 11:49:32 [35899] [2] searching for /var/nagiosramdisk/spool/perfdata//1429202033.perfdata.service
2015-04-27 11:49:32 [35899] [2] renaming /var/nagiosramdisk/spool/perfdata//1429202033.perfdata.service to /var/nagiosramdisk/spool/perfdata//1429202033.perfdata.service-PID-35899 for bulk update
2015-04-27 11:49:32 [35899] [2] reading /var/nagiosramdisk/spool/perfdata//1429202033.perfdata.service-PID-35899 for bulk update
2015-04-27 11:49:32 [35899] [1] 0 Lines processed
2015-04-27 11:49:32 [35899] [1] /var/nagiosramdisk/spool/perfdata//1429202033.perfdata.service-PID-35899 deleted
2015-04-27 11:49:32 [35899] [1] PNP exiting (runtime 0.000549s) ...
2015-04-27 11:49:32 [35892] [2] Using Config File /usr/local/nagios/etc/pnp/process_perfdata.cfg parameters
2015-04-27 11:49:32 [35892] [1] process_perfdata.pl-0.4.14 starting in BULK Mode called by NPCD
2015-04-27 11:49:32 [35892] [2] searching for /var/nagiosramdisk/spool/perfdata//1429202002.perfdata.service
2015-04-27 11:49:32 [35892] [2] renaming /var/nagiosramdisk/spool/perfdata//1429202002.perfdata.service to /var/nagiosramdisk/spool/perfdata//1429202002.perfdata.service-PID-35892 for bulk update
2015-04-27 11:49:32 [35892] [2] reading /var/nagiosramdisk/spool/perfdata//1429202002.perfdata.service-PID-35892 for bulk update
2015-04-27 11:49:32 [35892] [1] 0 Lines processed
2015-04-27 11:49:32 [35892] [1] /var/nagiosramdisk/spool/perfdata//1429202002.perfdata.service-PID-35892 deleted
2015-04-27 11:49:32 [35892] [1] PNP exiting (runtime 0.00053s) ...
2015-04-27 11:49:32 [35897] [2] Using Config File /usr/local/nagios/etc/pnp/process_perfdata.cfg parameters
2015-04-27 11:49:32 [35897] [1] process_perfdata.pl-0.4.14 starting in BULK Mode called by NPCD
2015-04-27 11:49:32 [35897] [2] searching for /var/nagiosramdisk/spool/perfdata//1429202033.perfdata.host
2015-04-27 11:49:32 [35897] [2] renaming /var/nagiosramdisk/spool/perfdata//1429202033.perfdata.host to /var/nagiosramdisk/spool/perfdata//1429202033.perfdata.host-PID-35897 for bulk update
2015-04-27 11:49:32 [35897] [2] reading /var/nagiosramdisk/spool/perfdata//1429202033.perfdata.host-PID-35897 for bulk update
2015-04-27 11:49:32 [35897] [1] 0 Lines processed
2015-04-27 11:49:32 [35897] [1] /var/nagiosramdisk/spool/perfdata//1429202033.perfdata.host-PID-35897 deleted
2015-04-27 11:49:32 [35897] [1] PNP exiting (runtime 0.000532s) ...
2015-04-27 12:01:03 [12303] [0] *** TIMEOUT: Timeout after 5 Sec. ****
2015-04-27 12:01:03 [12302] [0] *** TIMEOUT: Timeout after 5 Sec. ****
2015-04-27 12:01:03 [12303] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2015-04-27 12:01:03 [12304] [0] *** TIMEOUT: Timeout after 5 Sec. ****
2015-04-27 12:01:03 [12302] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2015-04-27 12:01:03 [12303] [0] *** TIMEOUT: Please check your process_perfdata.cfg
2015-04-27 12:01:03 [12302] [0] *** TIMEOUT: Please check your process_perfdata.cfg
2015-04-27 12:01:03 [12304] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2015-04-27 12:01:03 [12304] [0] *** TIMEOUT: Please check your process_perfdata.cfg
2015-04-27 12:01:03 [12303] [0] *** TIMEOUT: /var/nagiosramdisk/spool/perfdata//host-perfdata.1429609649-PID-12303 deleted
2015-04-27 12:01:03 [12302] [0] *** TIMEOUT: /var/nagiosramdisk/spool/perfdata//host-perfdata.1429609634-PID-12302 deleted
2015-04-27 12:01:03 [12304] [0] *** TIMEOUT: /var/nagiosramdisk/spool/perfdata//host-perfdata.1429609679-PID-12304 deleted
2015-04-27 12:01:03 [12305] [0] *** TIMEOUT: Timeout after 5 Sec. ****
2015-04-27 12:01:03 [12305] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2015-04-27 12:01:03 [12305] [0] *** TIMEOUT: Please check your process_perfdata.cfg
2015-04-27 12:01:03 [12305] [0] *** TIMEOUT: /var/nagiosramdisk/spool/perfdata//host-perfdata.1429609664-PID-12305 deleted
2015-04-27 12:01:03 [12305] [0] *** process_perfdata.pl terminated on signal ALRM
2015-04-27 12:01:03 [12303] [0] *** process_perfdata.pl terminated on signal ALRM
2015-04-27 12:01:03 [12302] [0] *** process_perfdata.pl terminated on signal ALRM
2015-04-27 12:01:03 [12304] [0] *** process_perfdata.pl terminated on signal ALRM
2015-04-27 12:01:08 [12457] [0] *** TIMEOUT: Timeout after 5 Sec. ****
2015-04-27 12:01:08 [12457] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2015-04-27 12:01:08 [12457] [0] *** TIMEOUT: Please check your process_perfdata.cfg
2015-04-27 12:01:08 [12457] [0] *** TIMEOUT: /var/nagiosramdisk/spool/perfdata//host-perfdata.1429609754-PID-12457 deleted
2015-04-27 12:01:08 [12457] [0] *** process_perfdata.pl terminated on signal ALRM
2015-04-27 12:01:08 [12455] [0] *** TIMEOUT: Timeout after 5 Sec. ****
2015-04-27 12:01:08 [12455] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2015-04-27 12:01:08 [12455] [0] *** TIMEOUT: Please check your process_perfdata.cfg
2015-04-27 12:01:08 [12455] [0] *** TIMEOUT: /var/nagiosramdisk/spool/perfdata//host-perfdata.1429609709-PID-12455 deleted
2015-04-27 12:01:08 [12455] [0] *** process_perfdata.pl terminated on signal ALRM
2015-04-27 12:01:08 [12456] [0] *** TIMEOUT: Timeout after 5 Sec. ****
2015-04-27 12:01:08 [12456] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2015-04-27 12:01:08 [12456] [0] *** TIMEOUT: Please check your process_perfdata.cfg
2015-04-27 12:01:08 [12456] [0] *** TIMEOUT: /var/nagiosramdisk/spool/perfdata//host-perfdata.1429609725-PID-12456 deleted
2015-04-27 12:01:08 [12456] [0] *** process_perfdata.pl terminated on signal ALRM
2015-04-27 12:01:09 [12454] [0] *** TIMEOUT: Timeout after 5 Sec. ****
2015-04-27 12:01:09 [12454] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2015-04-27 12:01:09 [12454] [0] *** TIMEOUT: Please check your process_perfdata.cfg
2015-04-27 12:01:09 [12454] [0] *** TIMEOUT: /var/nagiosramdisk/spool/perfdata//host-perfdata.1429609694-PID-12454 deleted
2015-04-27 12:01:09 [12454] [0] *** process_perfdata.pl terminated on signal ALRM
2015-04-27 12:01:09 [12459] [0] *** TIMEOUT: Timeout after 5 Sec. ****
2015-04-27 12:01:09 [12459] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2015-04-27 12:01:09 [12459] [0] *** TIMEOUT: Please check your process_perfdata.cfg
2015-04-27 12:01:09 [12459] [0] *** TIMEOUT: /var/nagiosramdisk/spool/perfdata//host-perfdata.1429609739-PID-12459 deleted
2015-04-27 12:01:09 [12459] [0] *** process_perfdata.pl terminated on signal ALRM
2015-04-27 13:07:19 [57298] [0] *** TIMEOUT: Timeout after 5 Sec. ****
2015-04-27 13:07:19 [57303] [0] *** TIMEOUT: Timeout after 5 Sec. ****
2015-04-27 13:07:19 [57298] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2015-04-27 13:07:19 [57303] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2015-04-27 13:07:19 [57298] [0] *** TIMEOUT: Please check your process_perfdata.cfg
2015-04-27 13:07:19 [57303] [0] *** TIMEOUT: Please check your process_perfdata.cfg
2015-04-27 13:07:19 [57298] [0] *** TIMEOUT: /var/nagiosramdisk/spool/perfdata//host-perfdata.1430127504-PID-57298 deleted
2015-04-27 13:07:19 [57303] [0] *** TIMEOUT: /var/nagiosramdisk/spool/perfdata//host-perfdata.1430127548-PID-57303 deleted
2015-04-27 13:07:19 [57298] [0] *** process_perfdata.pl terminated on signal ALRM
2015-04-27 13:07:19 [57303] [0] *** process_perfdata.pl terminated on signal ALRM
You have new mail in /var/spool/mail/root
[root@nms ~]#

[root@nms ~]# grep nagiosramdisk /usr/local/nagios/etc/nagios.cfg
service_perfdata_file=/var/nagiosramdisk/service-perfdata
host_perfdata_file=/var/nagiosramdisk/host-perfdata
check_result_path=/var/nagiosramdisk/spool/checkresults
object_cache_file=/var/nagiosramdisk/objects.cache
status_file=/var/nagiosramdisk/status.dat
temp_path=/var/nagiosramdisk/tmp
#temp_path=/var/nagiosramdisk/tmp

[root@nms ~]# grep nagiosramdisk /usr/local/nrdp/server/config.inc.php
$cfg["check_results_dir"]="/var/nagiosramdisk/spool/checkresults";

[root@nms ~]# grep nagiosramdisk /usr/local/nagiosxi/html/config.inc.php
$cfg['xidpe_dir'] = '/var/nagiosramdisk/spool/xidpe/';
$cfg['perfdata_spool'] = '/var/nagiosramdisk/spool/perfdata/';

[root@nms ~]# grep nagiosramdisk /usr/local/nagios/etc/pnp/npcd.cfg
perfdata_spool_dir = /var/nagiosramdisk/spool/perfdata/


[root@nms ~]# grep nagiosramdisk /usr/local/nagios/etc/commands.cfg
command_line /bin/mv /var/nagiosramdisk/host-perfdata /var/nagiosramdisk/spool/xidpe/$TIMET$.perfdata.host
command_line /bin/mv /var/nagiosramdisk/service-perfdata /var/nagiosramdisk/spool/xidpe/$TIMET$.perfdata.service
[root@nms ~]#

Re: performance graph

Posted: Sun May 24, 2015 8:48 pm
by Box293
hanya.radwan wrote:2015-04-27 12:01:03 [12303] [0] *** TIMEOUT: Timeout after 5 Sec. ****
2015-04-27 12:01:03 [12302] [0] *** TIMEOUT: Timeout after 5 Sec. ****
2015-04-27 12:01:03 [12303] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2015-04-27 12:01:03 [12304] [0] *** TIMEOUT: Timeout after 5 Sec. ****
2015-04-27 12:01:03 [12302] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2015-04-27 12:01:03 [12303] [0] *** TIMEOUT: Please check your process_perfdata.cfg
2015-04-27 12:01:03 [12302] [0] *** TIMEOUT: Please check your process_perfdata.cfg
2015-04-27 12:01:03 [12304] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2015-04-27 12:01:03 [12304] [0] *** TIMEOUT: Please check your process_perfdata.cfg
These look like part of your problem.

Can you please edit:

/usr/local/nagios/etc/pnp/process_perfdata.cfg

Change:

TIMEOUT = 5

To:

TIMEOUT = 20

Save and restart npcd

Code: Select all

service npcd restart
Then observe if the timeout errors stop:

Code: Select all

tail -f /usr/local/nagios/var/perfdata.log
If they don't, try increasing the value.


Also, please run this command:

Code: Select all

rrdtool
Post the output here.

Re: performance graph

Posted: Mon May 25, 2015 5:18 am
by hanya.radwan
regards the timeout log, it is stop , also I increased the timeout value to 40 but no timeout error

[root@nms ~]# rrdtool
RRDtool 1.4.8 Copyright 1997-2013 by Tobias Oetiker <[email protected]>
Compiled May 15 2014 12:16:35

Usage: rrdtool [options] command command_options
Valid commands: create, update, updatev, graph, graphv, dump, restore,
last, lastupdate, first, info, fetch, tune,
resize, xport, flushcached

RRDtool is distributed under the Terms of the GNU General
Public License Version 2. (www.gnu.org/copyleft/gpl.html)

For more information read the RRD manpages

Re: performance graph

Posted: Mon May 25, 2015 8:39 pm
by Box293
So does the problem still exist?

If yes, please run these commands and post the output:

Code: Select all

ls -al /usr/local/nagios/var/spool/perfdata/ | wc -l

ls -al /usr/local/nagios/var/spool/xidpe/ | wc -l

cat /usr/local/nagios/etc/pnp/pnp4nagios_release
Please upload these files:

Code: Select all

/usr/local/nagios/etc/nagios.cfg
/usr/local/nagios/etc/pnp/npcd.cfg
/usr/local/nagios/etc/pnp/process_perfdata.cfg
All times are UTC-05:00
Page 1 of 1

Powered by phpBB® Forum Software © phpBB Limited