network switch
Posted: Wed Jun 03, 2015 3:29 pm
hi,
i defied and configured switch with snmp, but when try add it through wizard network and router, no response;
[root@nms ~]# /usr/bin/cfgmaker --show-op-down --noreversedns --zero-speed '100000000' '[email protected]:::::1'
--base: Get Device Info on [email protected]:::::1
SNMP Error:
no response received
SNMPv1_Session (remote host: "10.100.5.29" [10.100.5.29].161)
community: "jawwal-snmp"
request ID: 872991977
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/bin/../lib/mrtg2/SNMP_util.pm line 651
SNMPWALK Problem for 1.3.6.1.2.1.1 on [email protected]:::::1:v4only
at /usr/bin/cfgmaker line 951
WARNING: Skipping [email protected]:::::1 as no info could be retrieved
Use of uninitialized value $comment_sysdescr in substitution (s///) at /usr/bin/cfgmaker line 379.
Use of uninitialized value $sysname in concatenation (.) or string at /usr/bin/cfgmaker line 412.
Use of uninitialized value $comment_sysdescr in concatenation (.) or string at /usr/bin/cfgmaker line 412.
Use of uninitialized value $syscontact in concatenation (.) or string at /usr/bin/cfgmaker line 412.
Use of uninitialized value $syslocation in concatenation (.) or string at /usr/bin/cfgmaker line 412.
# Created by
# /usr/bin/cfgmaker --show-op-down --noreversedns --zero-speed 100000000 [email protected]:::::1
### Global Config Options
# for UNIX
# WorkDir: /home/http/mrtg
# or for NT
# WorkDir: c:\mrtgdata
### Global Defaults
# to get bits instead of bytes and graphs growing to the right
# Options[_]: growright, bits
EnableIPv6: no
######################################################################
# System:
# Description:
# Contact:
# Location:
######################################################################
Best Regards
Abdelhafeth.Mzahem | Data Center Engineer – IT Directorate
Mobile: +970 59 9001538 | Website: www.Jawwal.ps
i defied and configured switch with snmp, but when try add it through wizard network and router, no response;
[root@nms ~]# /usr/bin/cfgmaker --show-op-down --noreversedns --zero-speed '100000000' '[email protected]:::::1'
--base: Get Device Info on [email protected]:::::1
SNMP Error:
no response received
SNMPv1_Session (remote host: "10.100.5.29" [10.100.5.29].161)
community: "jawwal-snmp"
request ID: 872991977
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/bin/../lib/mrtg2/SNMP_util.pm line 651
SNMPWALK Problem for 1.3.6.1.2.1.1 on [email protected]:::::1:v4only
at /usr/bin/cfgmaker line 951
WARNING: Skipping [email protected]:::::1 as no info could be retrieved
Use of uninitialized value $comment_sysdescr in substitution (s///) at /usr/bin/cfgmaker line 379.
Use of uninitialized value $sysname in concatenation (.) or string at /usr/bin/cfgmaker line 412.
Use of uninitialized value $comment_sysdescr in concatenation (.) or string at /usr/bin/cfgmaker line 412.
Use of uninitialized value $syscontact in concatenation (.) or string at /usr/bin/cfgmaker line 412.
Use of uninitialized value $syslocation in concatenation (.) or string at /usr/bin/cfgmaker line 412.
# Created by
# /usr/bin/cfgmaker --show-op-down --noreversedns --zero-speed 100000000 [email protected]:::::1
### Global Config Options
# for UNIX
# WorkDir: /home/http/mrtg
# or for NT
# WorkDir: c:\mrtgdata
### Global Defaults
# to get bits instead of bytes and graphs growing to the right
# Options[_]: growright, bits
EnableIPv6: no
######################################################################
# System:
# Description:
# Contact:
# Location:
######################################################################
Best Regards
Abdelhafeth.Mzahem | Data Center Engineer – IT Directorate
Mobile: +970 59 9001538 | Website: www.Jawwal.ps